From: Vinod Koul <vinod.koul@intel.com>
To: Robin Gong <b38343@freescale.com>
Cc: dan.j.williams@intel.com, andriy.shevchenko@linux.jf.intel.com,
dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 1/3] dma: imx-sdma: add support for sdma memory copy
Date: Fri, 5 Dec 2014 22:09:18 +0530 [thread overview]
Message-ID: <20141205163918.GO3411@intel.com> (raw)
In-Reply-To: <1414030940-15516-2-git-send-email-b38343@freescale.com>
On Thu, Oct 23, 2014 at 10:22:18AM +0800, Robin Gong wrote:
> -static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
> - struct dma_chan *chan, struct scatterlist *sgl,
> - unsigned int sg_len, enum dma_transfer_direction direction,
> - unsigned long flags, void *context)
> +static struct dma_async_tx_descriptor *sdma_prep_memcpy(
> + struct dma_chan *chan, dma_addr_t dma_dst,
> + dma_addr_t dma_src, size_t len, unsigned long flags)
> +{
> + struct sdma_channel *sdmac = to_sdma_chan(chan);
> + struct sdma_engine *sdma = sdmac->sdma;
> + int channel = sdmac->channel;
> + size_t count;
> + int i = 0, param, ret;
> + struct sdma_buffer_descriptor *bd;
> +
> + if (!chan || !len || sdmac->status == DMA_IN_PROGRESS)
> + return NULL;
why is this dependent on status. You can prepare a descriptor here!
> +
> + if (len >= NUM_BD * SDMA_BD_MAX_CNT) {
> + dev_err(sdma->dev, "channel%d: maximum bytes exceeded:%d > %d\n",
> + channel, len, NUM_BD * SDMA_BD_MAX_CNT);
> + goto err_out;
> + }
> +
> + sdmac->status = DMA_IN_PROGRESS;
??
> +
> + sdmac->buf_tail = 0;
> +
> + dev_dbg(sdma->dev, "memcpy: %x->%x, len=%d, channel=%d.\n",
> + dma_src, dma_dst, len, channel);
> +
> + sdmac->direction = DMA_MEM_TO_MEM;
> +
> + ret = sdma_load_context(sdmac);
> + if (ret)
> + goto err_out;
> +
> + sdmac->chn_count = 0;
> +
> + do {
> + count = min_t(size_t, len, SDMA_BD_MAX_CNT);
> + bd = &sdmac->bd[i];
> + bd->buffer_addr = dma_src;
> + bd->ext_buffer_addr = dma_dst;
> + bd->mode.count = count;
> +
> + if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) {
> + ret = -EINVAL;
> + goto err_out;
> + }
> +
> + switch (sdmac->word_size) {
> + case DMA_SLAVE_BUSWIDTH_4_BYTES:
So are you dependent of dma_slave_config to be set. Then it is wrong. for
memcpy you shoudn't be!
> switch (sdmac->word_size) {
> case DMA_SLAVE_BUSWIDTH_4_BYTES:
> bd->mode.command = 0;
> - if (count & 3 || sg->dma_address & 3)
> + if ((count | sg_src->dma_address | (sg_dst &&
> + (sg_dst->dma_address))) & 3)
> return NULL;
> break;
> case DMA_SLAVE_BUSWIDTH_2_BYTES:
> bd->mode.command = 2;
> - if (count & 1 || sg->dma_address & 1)
> + if ((count | sg_src->dma_address |
> + (sg_dst && (sg_dst->dma_address))) & 1)
> return NULL;
this doesn't seem to have anything to do with memcpy, shouldn't this be
independent change here?
> break;
> case DMA_SLAVE_BUSWIDTH_1_BYTE:
> @@ -1099,21 +1214,23 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
>
> param = BD_DONE | BD_EXTD | BD_CONT;
>
> - if (i + 1 == sg_len) {
> + if (i + 1 == src_nents) {
> param |= BD_INTR;
> param |= BD_LAST;
> param &= ~BD_CONT;
> }
>
> - dev_dbg(sdma->dev, "entry %d: count: %d dma: %#llx %s%s\n",
> - i, count, (u64)sg->dma_address,
> + dev_dbg(sdma->dev, "entry %d: count: %d dma: 0x%08x %s%s\n",
> + i, count, sg_src->dma_address,
> param & BD_WRAP ? "wrap" : "",
> param & BD_INTR ? " intr" : "");
ditto
>
> bd->mode.status = param;
> + if (direction == DMA_MEM_TO_MEM)
> + sg_dst = sg_next(sg_dst);
> }
>
> - sdmac->num_bd = sg_len;
> + sdmac->num_bd = src_nents;
> sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys;
>
> return &sdmac->desc;
> @@ -1122,6 +1239,24 @@ err_out:
> return NULL;
> }
>
> +static struct dma_async_tx_descriptor *sdma_prep_memcpy_sg(
> + struct dma_chan *chan,
> + struct scatterlist *dst_sg, unsigned int dst_nents,
> + struct scatterlist *src_sg, unsigned int src_nents,
> + unsigned long flags)
> +{
> + return sdma_prep_sg(chan, dst_sg, dst_nents, src_sg, src_nents,
> + DMA_MEM_TO_MEM);
> +}
> +
> +static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
> + struct dma_chan *chan, struct scatterlist *sgl,
> + unsigned int sg_len, enum dma_transfer_direction direction,
> + unsigned long flags, void *context)
> +{
> + return sdma_prep_sg(chan, NULL, 0, sgl, sg_len, direction);
> +}
you should have done this first and then added memcpy
--
~Vinod
next prev parent reply other threads:[~2014-12-05 16:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-23 2:22 [PATCH v5 0/3] dma: imx-sdma: add support for sdma memory copy Robin Gong
2014-10-23 2:22 ` [PATCH v5 1/3] " Robin Gong
2014-12-05 16:39 ` Vinod Koul [this message]
2015-01-13 3:55 ` Robin Gong
2014-10-23 2:22 ` [PATCH v5 2/3] dma: imx-sdma: correct the printk format Robin Gong
2014-10-23 2:22 ` [PATCH v5 3/3] dma: imx-sdma: reorg code to make code clean Robin Gong
2014-12-05 16:41 ` Vinod Koul
2015-01-13 3:55 ` Robin Gong
-- strict thread matches above, loose matches on Subject: below --
2014-10-23 2:19 [PATCH v5 0/3] dma: imx-sdma: add support for sdma memory copy Robin Gong
2014-10-23 2:19 ` [PATCH v5 1/3] " Robin Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141205163918.GO3411@intel.com \
--to=vinod.koul@intel.com \
--cc=andriy.shevchenko@linux.jf.intel.com \
--cc=b38343@freescale.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.