All of lore.kernel.org
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.de>
To: Ulf Hansson <ulf.hansson@linaro.org>, Chris Ball <chris@printf.net>
Cc: GTA04 owners <gta04-owner@goldelico.com>,
	linux-omap@vger.kernel.org, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, Felipe Balbi <balbi@ti.com>
Subject: [PATCH 3/3] mmc: omap_hsmmc: use mmc_of_parse to parse common mmc configuration.
Date: Fri, 12 Dec 2014 08:43:08 +1100	[thread overview]
Message-ID: <20141211214308.3753.15675.stgit@notabene.brown> (raw)
In-Reply-To: <20141211214023.3753.10652.stgit@notabene.brown>

This ensures that all standard options are available to hsmmc,
In particular, I need cap-power-off-card.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/mmc/host/omap_hsmmc.c |   33 ++++++++-------------------------
 1 file changed, 8 insertions(+), 25 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 32514b648e3c..1bfacc59e3bf 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1931,13 +1931,6 @@ static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
 {
 	struct omap_hsmmc_platform_data *pdata;
 	struct device_node *np = dev->of_node;
-	u32 bus_width, max_freq;
-	int cd_gpio, wp_gpio;
-
-	cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
-	wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
-	if (cd_gpio == -EPROBE_DEFER || wp_gpio == -EPROBE_DEFER)
-		return ERR_PTR(-EPROBE_DEFER);
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -1946,34 +1939,20 @@ static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
 	if (of_find_property(np, "ti,dual-volt", NULL))
 		pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
 
-	pdata->switch_pin = cd_gpio;
-	pdata->gpio_wp = wp_gpio;
+	pdata->switch_pin = -EINVAL;
+	pdata->gpio_wp = -EINVAL;
 
 	if (of_find_property(np, "ti,non-removable", NULL)) {
 		pdata->nonremovable = true;
 		pdata->no_regulator_off_init = true;
 	}
-	of_property_read_u32(np, "bus-width", &bus_width);
-	if (bus_width == 4)
-		pdata->caps |= MMC_CAP_4_BIT_DATA;
-	else if (bus_width == 8)
-		pdata->caps |= MMC_CAP_8_BIT_DATA;
 
 	if (of_find_property(np, "ti,needs-special-reset", NULL))
 		pdata->features |= HSMMC_HAS_UPDATED_RESET;
 
-	if (!of_property_read_u32(np, "max-frequency", &max_freq))
-		pdata->max_freq = max_freq;
-
 	if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
 		pdata->features |= HSMMC_HAS_HSPE_SUPPORT;
 
-	if (of_find_property(np, "keep-power-in-suspend", NULL))
-		pdata->pm_caps |= MMC_PM_KEEP_POWER;
-
-	if (of_find_property(np, "enable-sdio-wakeup", NULL))
-		pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
-
 	return pdata;
 }
 #else
@@ -2031,6 +2010,10 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		goto err1;
+
 	host		= mmc_priv(mmc);
 	host->mmc	= mmc;
 	host->pdata	= pdata;
@@ -2059,7 +2042,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	if (pdata->max_freq > 0)
 		mmc->f_max = pdata->max_freq;
-	else
+	else if (mmc->f_max == 0)
 		mmc->f_max = OMAP_MMC_MAX_CLOCK;
 
 	spin_lock_init(&host->irq_lock);
@@ -2113,7 +2096,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	if (mmc_pdata(host)->nonremovable)
 		mmc->caps |= MMC_CAP_NONREMOVABLE;
 
-	mmc->pm_caps = mmc_pdata(host)->pm_caps;
+	mmc->pm_caps |= mmc_pdata(host)->pm_caps;
 
 	omap_hsmmc_conf_bus_power(host);
 

  parent reply	other threads:[~2014-12-11 21:43 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-11 21:43 [PATCH v2 0/3] mmc: omap_hsmmc: make more use of mmc library functionality NeilBrown
2014-12-11 21:43 ` [PATCH 2/3] mmc: omap_hsmmc: use slot-gpio library for gpio support NeilBrown
2014-12-19 11:22   ` Ulf Hansson
2014-12-11 21:43 ` NeilBrown [this message]
2014-12-11 21:43 ` [PATCH 1/3] mmc: omap_hsmmc: remove prepare/complete system suspend support NeilBrown
2014-12-19 11:23   ` Ulf Hansson
  -- strict thread matches above, loose matches on Subject: below --
2015-01-12 19:23 [PATCH 0/3] Convert omap_hsmmc to use common devicetree parsing code NeilBrown
2015-01-12 19:23 ` [PATCH 3/3] mmc: omap_hsmmc: use mmc_of_parse to parse common mmc configuration NeilBrown
2014-12-24 21:20 [PATCH 0/3] Convert omap_hsmmc to use common devicetree parsing code NeilBrown
2014-12-24 21:20 ` [PATCH 3/3] mmc: omap_hsmmc: use mmc_of_parse to parse common mmc configuration NeilBrown
2014-11-07 23:52 [PATCH 0/3] mmc: omap_hsmmc: make more use of mmc library functionality NeilBrown
2014-11-07 23:52 ` [PATCH 3/3] mmc: omap_hsmmc: use mmc_of_parse to parse common mmc configuration NeilBrown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141211214308.3753.15675.stgit@notabene.brown \
    --to=neilb@suse.de \
    --cc=balbi@ti.com \
    --cc=chris@printf.net \
    --cc=gta04-owner@goldelico.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.