Re: [PATCH 2/3] TTY: add slave driver to power-on device via a regulator.

[NeilBrown <neilb@suse.de>]

[-- Attachment #1: Type: text/plain, Size: 2681 bytes --]

On Thu, 11 Dec 2014 23:58:48 +0100 Sebastian Reichel <sre@kernel.org> wrote:

> Hi,
> 
> On Fri, Dec 12, 2014 at 08:59:44AM +1100, NeilBrown wrote:
> > The regulator is identified in devicetree as 'vdd-supply'
> 
> long description is kind of useless...
> 
> > Signed-off-by: NeilBrown <neilb@suse.de>
> > ---
> >  .../devicetree/bindings/serial/slave-reg.txt       |   18 ++++
> >  drivers/tty/Kconfig                                |    2 
> >  drivers/tty/Makefile                               |    1 
> >  drivers/tty/slaves/Kconfig                         |   12 ++
> >  drivers/tty/slaves/Makefile                        |    2 
> >  drivers/tty/slaves/tty-reg.c                       |  102 ++++++++++++++++++++
> >  6 files changed, 137 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/serial/slave-reg.txt
> >  create mode 100644 drivers/tty/slaves/Kconfig
> >  create mode 100644 drivers/tty/slaves/Makefile
> >  create mode 100644 drivers/tty/slaves/tty-reg.c
> > 
> > diff --git a/Documentation/devicetree/bindings/serial/slave-reg.txt b/Documentation/devicetree/bindings/serial/slave-reg.txt
> > new file mode 100644
> > index 000000000000..7896bce8dfe4
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/serial/slave-reg.txt
> > @@ -0,0 +1,18 @@
> > +Regulator powered UART-attached device
> > +
> > +Required properties:
> > +- compatible: "tty,regulator"
> > +- vdd-supply: regulator to power the device
> > +
> > +
> > +This is listed as a child node of a UART.  When the
> > +UART is opened, the device is powered.
> > +
> > +Example:
> > +
> > +&uart1 {
> > +	bluetooth {
> > +		compatible = "tty,regulator";
> > +		vdd-supply = <&vaux4>;
> > +	};
> > +};
> 
> NACK. The compatible value should describe the connected device. You
> did not connect a regulator, but a bluetooth chip! DT should look
> like this:
> 
> &uart1 {
>     bluetooth {
>         compatible = "vendor,bluetooth-chip";
>         vdd-supply = <&vaux4>;
>     };
> };
> 
> I think it would be ok to use your generic driver to handle the
> specific compatible value, though.
> 
> Having the proper compatible value means, that there can be a more
> specific driver later, that other operating systems can expose the
> device as some kind of /dev/bluetooth instead of /dev/ttyXY, that
> userspace is able to know there is a bluetooth device connected to
> /dev/ttyXY by parsing the DT and results in easier-to-understand
> DTS.

So the tty_reg_dt_ids array could conceivably grow a long list of compatible
devices, starting with this one.  I guess that makes sense.

Thanks,
NeilBrown

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 811 bytes --]