Re: [PATCH v5 0/5] Consolidate and unify state change handling

[Andri Yngvason <andri.yngvason@marel.com>]

Quoting Oliver Hartkopp (2014-12-18 07:22:56)
> On 18.12.2014 07:09, Tom Evans wrote:
> > Andri Yngvason <andri.yngvason <at> marel.com> writes:
> >> Tested on sja1000 using
> >>   cangen -Ii -g 100 can0
> >> and
> >>   candump -ta -e can0,0:0,#FFFFFFFF
> >>
> >> Disconnected bus:
> >>   (1417614605.207964)  can0  07D   [6]  49 6E A1 7A 2A 3D
> >>   (1417614605.308206)  can0  07E   [8]  5F 18 AA 0F E5 82 CA 11
> >>   (1417614605.408107)  can0  07F   [5]  3E 12 B0 68 1A
> >>   (1417614605.514235)  can0  20000004   [8]  00 08 00 00 00 00 60 00
> > ERRORFRAME
> >>      controller-problem{tx-error-warning}
> >>      error-counter-tx-rx{{96}{0}}
> >
> > Is the version of candump that supports "-e" and prints the errors
> > available? It would be very useful in my current testing.
> >
> 
> The candump in can-utils provide this option:
> 
>         https://gitorious.org/linux-can/can-utils/
> 
> You may "git clone" the latest version and build it from source.
> 
> If you have a recent Debian or Ubuntu-style distro on your Linux-box:
> 
>         apt-get install can-utils
> 
> will make it.
> 

Actually, you'll need to apply this patch:
	http://article.gmane.org/gmane.linux.can/7165/

I think it hasn't been applied yet.

--
Andri