From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 19 Dec 2014 11:40:46 +0100 From: Gilles Chanteperdrix Message-ID: <20141219104046.GB2012@hermes.click-hack.org> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: Subject: Re: [Xenomai] Help regarding porting xenomai in panda board List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: satya patel Cc: xenomai@xenomai.org On Fri, Dec 19, 2014 at 03:32:35PM +0530, satya patel wrote: > I am very new to this .I am little confused which patch should I apply to > Linux 3.4.25 kernel using xenomai 3.0(arm A9) Also, there is no need to port xenomai to the panda board, because porting xenomai to the panda board has already been done, as indicated on the following page: https://xenomai.org/embedded-hardware/#Supported_Evaluation_Boards -- Gilles.