From: Johan Hovold <johan@kernel.org>
To: Richard <richjunk@pacbell.net>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: Kernel 3.17.x Attaching Keyspan 4-Port Serial to USB Adapter Causes Kernel Panic
Date: Mon, 22 Dec 2014 18:53:01 +0100 [thread overview]
Message-ID: <20141222175301.GF30375@localhost> (raw)
In-Reply-To: <54960F74.1050608@pacbell.net>
[+CC: linux-usb ]
On Sat, Dec 20, 2014 at 04:08:20PM -0800, Richard wrote:
> On a new Gentoo based system with Kernel.org Kernels 3.17.4 to 3.17.7
> when I physically plug the Keyspan 4-Port Serial to USB adapter into a
> usb port my system freezes with a "unable to handle kernel NULL pointer
> deference" message.
>
> My old system (also Gentoo based with Kernel.org 3.17.4) does not have
> this issue. Both systems are using the USB_SERIAL_KEYSPAN_USA49W
> driver module.
So the same kernel is used (3.17.4), but only the new system oopses?
> I tried booting into single user mode, using modprobe to load
> USB_SERIAL_KEYSPAN_USA49W. lsmod shows the driver. When I pluged the
> device in I receive the system freeze. Below is what I copied off the
> console ...
>
> BUG: Unable to handle kernel NULL pointer deference at 000...8c
> IP: [<ffffffffa006fbdd>] usa49_instat_callback+0x4d/0xb0[keyspan]
> PGD 1037faa067 PUD 1038301067 PMD 0
> Oops: 0002 [#1] SMP
> Modules linked in: keyspan ezusb usbserial hid_generic ...
This driver is a bit of a mess. Could you try the patch below and see if
it fixes the problem?
Thanks,
Johan
>From 3e98e15094be174d08dc31daab5c7b7791228515 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Mon, 22 Dec 2014 18:39:39 +0100
Subject: [PATCH] USB: keyspan: fix null-deref at probe
Fix null-pointer dereference during probe if the interface-status
completion handler is called before the individual ports have been set
up.
Reported-by: Richard <richjunk@pacbell.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/keyspan.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 077c714f1285..e07b15ed5814 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -410,6 +410,8 @@ static void usa26_instat_callback(struct urb *urb)
}
port = serial->port[msg->port];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
@@ -420,7 +422,7 @@ static void usa26_instat_callback(struct urb *urb)
if (old_dcd_state != p_priv->dcd_state)
tty_port_tty_hangup(&port->port, true);
-
+resubmit:
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
@@ -527,6 +529,8 @@ static void usa28_instat_callback(struct urb *urb)
}
port = serial->port[msg->port];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
@@ -537,7 +541,7 @@ static void usa28_instat_callback(struct urb *urb)
if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
tty_port_tty_hangup(&port->port, true);
-
+resubmit:
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
@@ -607,6 +611,8 @@ static void usa49_instat_callback(struct urb *urb)
}
port = serial->port[msg->portNumber];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
@@ -617,7 +623,7 @@ static void usa49_instat_callback(struct urb *urb)
if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
tty_port_tty_hangup(&port->port, true);
-
+resubmit:
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
@@ -855,6 +861,8 @@ static void usa90_instat_callback(struct urb *urb)
port = serial->port[0];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
@@ -865,7 +873,7 @@ static void usa90_instat_callback(struct urb *urb)
if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
tty_port_tty_hangup(&port->port, true);
-
+resubmit:
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
@@ -926,6 +934,8 @@ static void usa67_instat_callback(struct urb *urb)
port = serial->port[msg->port];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
@@ -934,7 +944,7 @@ static void usa67_instat_callback(struct urb *urb)
if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
tty_port_tty_hangup(&port->port, true);
-
+resubmit:
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
--
2.0.5
next prev parent reply other threads:[~2014-12-22 17:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-21 0:08 Kernel 3.17.x Attaching Keyspan 4-Port Serial to USB Adapter Causes Kernel Panic Richard
2014-12-22 17:53 ` Johan Hovold [this message]
2014-12-23 20:57 ` Richard
2015-01-02 14:05 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141222175301.GF30375@localhost \
--to=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=richjunk@pacbell.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.