From: Pavel Machek <pavel@ucw.cz>
To: edubezval@gmail.com, rui.zhang@intel.com,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH] cleanup ti-soc-thermal
Date: Sat, 3 Jan 2015 12:19:04 +0100 [thread overview]
Message-ID: <20150103111904.GA11545@amd> (raw)
Simplify code by removing goto's where they point to simple return.
Avoid confusing |= on error values.
Correct whitespace.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 634b6ce..3b4e72f 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -263,18 +264,13 @@ static
int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
{
const struct ti_bandgap_data *conf = bgp->conf;
- int ret = 0;
/* look up for temperature in the table and return the temperature */
- if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val) {
- ret = -ERANGE;
- goto exit;
- }
+ if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val)
+ return -ERANGE;
*t = bgp->conf->conv_table[adc_val - conf->adc_start_val];
-
-exit:
- return ret;
+ return 0;
}
/**
@@ -295,16 +291,14 @@ int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
{
const struct ti_bandgap_data *conf = bgp->conf;
const int *conv_table = bgp->conf->conv_table;
- int high, low, mid, ret = 0;
+ int high, low, mid;
low = 0;
high = conf->adc_end_val - conf->adc_start_val;
mid = (high + low) / 2;
- if (temp < conv_table[low] || temp > conv_table[high]) {
- ret = -ERANGE;
- goto exit;
- }
+ if (temp < conv_table[low] || temp > conv_table[high])
+ return -ERANGE;
while (low < high) {
if (temp < conv_table[mid])
@@ -315,9 +309,7 @@ int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
}
*adc = conf->adc_start_val + low;
-
-exit:
- return ret;
+ return 0;
}
/**
@@ -343,13 +335,11 @@ int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
*/
ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
if (ret < 0)
- goto exit;
+ return ret;
temp += hyst_val;
ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);
-
-exit:
return ret;
}
@@ -468,22 +458,18 @@ exit:
*/
static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
{
- int ret = 0;
-
if (!bgp || IS_ERR(bgp)) {
pr_err("%s: invalid bandgap pointer\n", __func__);
- ret = -EINVAL;
- goto exit;
+ return -EINVAL;
}
if ((id < 0) || (id >= bgp->conf->sensor_count)) {
dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
__func__, id);
- ret = -ERANGE;
+ return -ERANGE;
}
-exit:
- return ret;
+ return 0;
}
/**
@@ -511,12 +497,10 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
ret = ti_bandgap_validate(bgp, id);
if (ret)
- goto exit;
+ return ret;
- if (!TI_BANDGAP_HAS(bgp, TALERT)) {
- ret = -ENOTSUPP;
- goto exit;
- }
+ if (!TI_BANDGAP_HAS(bgp, TALERT))
+ return -ENOTSUPP;
ts_data = bgp->conf->sensors[id].ts_data;
tsr = bgp->conf->sensors[id].registers;
@@ -529,17 +513,15 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
}
if (ret)
- goto exit;
+ return ret;
ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
if (ret < 0)
- goto exit;
+ return ret;
spin_lock(&bgp->lock);
ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
spin_unlock(&bgp->lock);
-
-exit:
return ret;
}
@@ -582,7 +564,7 @@ static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
temp = (temp & mask) >> __ffs(mask);
- ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+ ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret) {
dev_err(bgp->dev, "failed to read thot\n");
ret = -EIO;
@@ -1220,11 +1222,10 @@ int ti_bandgap_probe(struct platform_device *pdev)
goto free_irqs;
}
- bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
+ bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
ret = IS_ERR(bgp->div_clk);
if (ret) {
- dev_err(&pdev->dev,
- "failed to request div_ts_ck clock ref\n");
+ dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n");
ret = PTR_ERR(bgp->div_clk);
goto free_irqs;
}
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 5fd0386..c62a6de 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -76,7 +76,7 @@ static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
}
/* thermal zone ops */
-/* Get temperature callback function for thermal zone*/
+/* Get temperature callback function for thermal zone */
static inline int __ti_thermal_get_temp(void *devdata, long *temp)
{
struct thermal_zone_device *pcb_tz = NULL;
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next reply other threads:[~2015-01-03 11:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-03 11:19 Pavel Machek [this message]
2015-01-03 17:48 ` [PATCH] cleanup ti-soc-thermal Nishanth Menon
2015-01-03 17:48 ` Nishanth Menon
2015-01-03 18:51 ` Pavel Machek
2015-01-03 18:57 ` Nishanth Menon
2015-01-03 19:02 ` Pavel Machek
2015-01-03 18:53 ` Pavel Machek
2015-01-18 20:17 ` [PATCHv2] " Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150103111904.GA11545@amd \
--to=pavel@ucw.cz \
--cc=edubezval@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.