Re: [PATCH V2] Thermal: imx: add clk disable/enable for suspend/resume

[Eduardo Valentin <edubezval@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1484 bytes --]

On Tue, Jan 06, 2015 at 06:50:22PM +0800, Anson Huang wrote:
> Thermal sensor's clk is from pll3_usb_otg, per hardware
> design requirement, need to make sure pll3_usb_otg is disabled
> before STOP mode is entered, otherwise, all PFDs under it may
> enter incorrect state, this patch disables pll3_usb_otg before
> suspend and enables it after resume.
> 
> Signed-off-by: Anson Huang <b20788@freescale.com>

adding to my -fixes branch.

> ---
>  drivers/thermal/imx_thermal.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
> index 461bf3d..dc8bcd8 100644
> --- a/drivers/thermal/imx_thermal.c
> +++ b/drivers/thermal/imx_thermal.c
> @@ -600,6 +600,7 @@ static int imx_thermal_suspend(struct device *dev)
>  	regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
>  	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
>  	data->mode = THERMAL_DEVICE_DISABLED;
> +	clk_disable_unprepare(data->thermal_clk);
>  
>  	return 0;
>  }
> @@ -609,6 +610,7 @@ static int imx_thermal_resume(struct device *dev)
>  	struct imx_thermal_data *data = dev_get_drvdata(dev);
>  	struct regmap *map = data->tempmon;
>  
> +	clk_prepare_enable(data->thermal_clk);
>  	/* Enabled thermal sensor after resume */
>  	regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
>  	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
> -- 
> 1.9.1
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]