From: Bruce Allan <bruce.w.allan@intel.com>
To: linux-crypto@vger.kernel.org
Subject: [PATCH] crypto: qat - fix device reset flow
Date: Fri, 09 Jan 2015 11:54:58 -0800 [thread overview]
Message-ID: <20150109195457.28205.23092.stgit@gitlad.jf.intel.com> (raw)
When the device needs a reset, e.g. when an uncorrectable PCIe AER event
occurs, various services/data structures need to be cleaned up, the
hardware reset and the services/data structures initialized and started.
The code to perform the cleanup and initialization was not performed when
a device reset was done.
This patch moves some of the initialization code out of the .probe entry-
point into a separate function that is now called during probe as well as
after the hardware has been reset. Similarly, a new function is added for
first cleaning up these services/data structures prior to resetting. The
new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for
which there are already prototypes but no actual functions just yet and are
now called when the device is reset and during probe/cleanup of the driver.
The down and up flows via ioctl calls has similarly been updated.
In addition, there are two other bugs in the reset flow - one in the logic
for determining whether to schedule a device reset upon receiving an
uncorrectable AER event which prevents the reset flow from being initiated,
and another with clearing the status bit indicating a device is configured
(when resetting the device the configuration remains across the reset so
the bit should not be cleared, otherwise, the necessary services will not
be re-started in adf_dev_start() after the reset - clear the bit only when
actually deleting the configuration).
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
---
drivers/crypto/qat/qat_common/adf_accel_devices.h | 5 +
drivers/crypto/qat/qat_common/adf_aer.c | 7 +-
drivers/crypto/qat/qat_common/adf_cfg.c | 2
drivers/crypto/qat/qat_common/adf_common_drv.h | 2
drivers/crypto/qat/qat_common/adf_ctl_drv.c | 7 +-
drivers/crypto/qat/qat_common/adf_init.c | 91 ++++++++++++++++++--
.../crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.c | 19 ++++
drivers/crypto/qat/qat_dh895xcc/adf_drv.c | 42 ++-------
8 files changed, 128 insertions(+), 47 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_accel_devices.h b/drivers/crypto/qat/qat_common/adf_accel_devices.h
index 2ed4256..ed226ce 100644
--- a/drivers/crypto/qat/qat_common/adf_accel_devices.h
+++ b/drivers/crypto/qat/qat_common/adf_accel_devices.h
@@ -148,6 +148,11 @@ struct adf_hw_device_data {
int (*alloc_irq)(struct adf_accel_dev *accel_dev);
void (*free_irq)(struct adf_accel_dev *accel_dev);
void (*enable_error_correction)(struct adf_accel_dev *accel_dev);
+ int (*init_admin_comms)(struct adf_accel_dev *accel_dev);
+ void (*exit_admin_comms)(struct adf_accel_dev *accel_dev);
+ int (*init_arb)(struct adf_accel_dev *accel_dev);
+ void (*exit_arb)(struct adf_accel_dev *accel_dev);
+ void (*enable_ints)(struct adf_accel_dev *accel_dev);
const char *fw_name;
uint32_t pci_dev_id;
uint32_t fuses;
diff --git a/drivers/crypto/qat/qat_common/adf_aer.c b/drivers/crypto/qat/qat_common/adf_aer.c
index 10ce4a2..740dc9e 100644
--- a/drivers/crypto/qat/qat_common/adf_aer.c
+++ b/drivers/crypto/qat/qat_common/adf_aer.c
@@ -125,8 +125,9 @@ static void adf_device_reset_worker(struct work_struct *work)
adf_dev_restarting_notify(accel_dev);
adf_dev_stop(accel_dev);
+ adf_dev_shutdown(accel_dev);
adf_dev_restore(accel_dev);
- if (adf_dev_start(accel_dev)) {
+ if (adf_dev_init(accel_dev) || adf_dev_start(accel_dev)) {
/* The device hanged and we can't restart it so stop here */
dev_err(&GET_DEV(accel_dev), "Restart device failed\n");
kfree(reset_data);
@@ -148,8 +149,8 @@ static int adf_dev_aer_schedule_reset(struct adf_accel_dev *accel_dev,
{
struct adf_reset_dev_data *reset_data;
- if (adf_dev_started(accel_dev) &&
- !test_bit(ADF_STATUS_RESTARTING, &accel_dev->status))
+ if (!adf_dev_started(accel_dev) ||
+ test_bit(ADF_STATUS_RESTARTING, &accel_dev->status))
return 0;
set_bit(ADF_STATUS_RESTARTING, &accel_dev->status);
diff --git a/drivers/crypto/qat/qat_common/adf_cfg.c b/drivers/crypto/qat/qat_common/adf_cfg.c
index aba7f1d..de16da9 100644
--- a/drivers/crypto/qat/qat_common/adf_cfg.c
+++ b/drivers/crypto/qat/qat_common/adf_cfg.c
@@ -50,6 +50,7 @@
#include <linux/seq_file.h>
#include "adf_accel_devices.h"
#include "adf_cfg.h"
+#include "adf_common_drv.h"
static DEFINE_MUTEX(qat_cfg_read_lock);
@@ -159,6 +160,7 @@ void adf_cfg_del_all(struct adf_accel_dev *accel_dev)
down_write(&dev_cfg_data->lock);
adf_cfg_section_del_all(&dev_cfg_data->sec_list);
up_write(&dev_cfg_data->lock);
+ clear_bit(ADF_STATUS_CONFIGURED, &accel_dev->status);
}
/**
diff --git a/drivers/crypto/qat/qat_common/adf_common_drv.h b/drivers/crypto/qat/qat_common/adf_common_drv.h
index 5e8f9d4..a62e485 100644
--- a/drivers/crypto/qat/qat_common/adf_common_drv.h
+++ b/drivers/crypto/qat/qat_common/adf_common_drv.h
@@ -93,7 +93,7 @@ int adf_service_unregister(struct service_hndl *service);
int adf_dev_init(struct adf_accel_dev *accel_dev);
int adf_dev_start(struct adf_accel_dev *accel_dev);
int adf_dev_stop(struct adf_accel_dev *accel_dev);
-int adf_dev_shutdown(struct adf_accel_dev *accel_dev);
+void adf_dev_shutdown(struct adf_accel_dev *accel_dev);
int adf_ctl_dev_register(void);
void adf_ctl_dev_unregister(void);
diff --git a/drivers/crypto/qat/qat_common/adf_ctl_drv.c b/drivers/crypto/qat/qat_common/adf_ctl_drv.c
index 7ee93f8..74207a6 100644
--- a/drivers/crypto/qat/qat_common/adf_ctl_drv.c
+++ b/drivers/crypto/qat/qat_common/adf_ctl_drv.c
@@ -282,6 +282,8 @@ static int adf_ctl_stop_devices(uint32_t id)
if (adf_dev_stop(accel_dev)) {
pr_err("QAT: Failed to stop qat_dev%d\n", id);
ret = -EFAULT;
+ } else {
+ adf_dev_shutdown(accel_dev);
}
}
}
@@ -343,7 +345,9 @@ static int adf_ctl_ioctl_dev_start(struct file *fp, unsigned int cmd,
if (!adf_dev_started(accel_dev)) {
pr_info("QAT: Starting acceleration device qat_dev%d.\n",
ctl_data->device_id);
- ret = adf_dev_start(accel_dev);
+ ret = adf_dev_init(accel_dev);
+ if (!ret)
+ ret = adf_dev_start(accel_dev);
} else {
pr_info("QAT: Acceleration device qat_dev%d already started.\n",
ctl_data->device_id);
@@ -351,6 +355,7 @@ static int adf_ctl_ioctl_dev_start(struct file *fp, unsigned int cmd,
if (ret) {
pr_err("QAT: Failed to start qat_dev%d\n", ctl_data->device_id);
adf_dev_stop(accel_dev);
+ adf_dev_shutdown(accel_dev);
}
out:
kfree(ctl_data);
diff --git a/drivers/crypto/qat/qat_common/adf_init.c b/drivers/crypto/qat/qat_common/adf_init.c
index 5c0e47a..a3afa0f 100644
--- a/drivers/crypto/qat/qat_common/adf_init.c
+++ b/drivers/crypto/qat/qat_common/adf_init.c
@@ -108,26 +108,47 @@ int adf_service_unregister(struct service_hndl *service)
EXPORT_SYMBOL_GPL(adf_service_unregister);
/**
- * adf_dev_start() - Start acceleration service for the given accel device
- * @accel_dev: Pointer to acceleration device.
+ * adf_dev_init() - Init data structures and services for the given accel device
+ * @accel_dev: Pointer to acceleration device.
*
- * Function notifies all the registered services that the acceleration device
- * is ready to be used.
- * To be used by QAT device specific drivers.
+ * Initialize the ring data structures and the admin comms and arbitration
+ * services.
*
* Return: 0 on success, error code othewise.
*/
-int adf_dev_start(struct adf_accel_dev *accel_dev)
+int adf_dev_init(struct adf_accel_dev *accel_dev)
{
struct service_hndl *service;
struct list_head *list_itr;
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
+ if (!hw_data) {
+ dev_err(&GET_DEV(accel_dev),
+ "QAT: Failed to init device - hw_data not set\n");
+ return -EFAULT;
+ }
+
if (!test_bit(ADF_STATUS_CONFIGURED, &accel_dev->status)) {
pr_info("QAT: Device not configured\n");
return -EFAULT;
}
- set_bit(ADF_STATUS_STARTING, &accel_dev->status);
+
+ if (adf_init_etr_data(accel_dev)) {
+ dev_err(&GET_DEV(accel_dev), "Failed initialize etr\n");
+ return -EFAULT;
+ }
+
+ if (hw_data->init_admin_comms && hw_data->init_admin_comms(accel_dev)) {
+ dev_err(&GET_DEV(accel_dev), "Failed initialize admin comms\n");
+ return -EFAULT;
+ }
+
+ if (hw_data->init_arb && hw_data->init_arb(accel_dev)) {
+ dev_err(&GET_DEV(accel_dev), "Failed initialize hw arbiter\n");
+ return -EFAULT;
+ }
+
+ hw_data->enable_ints(accel_dev);
if (adf_ae_init(accel_dev)) {
pr_err("QAT: Failed to initialise Acceleration Engine\n");
@@ -178,6 +199,27 @@ int adf_dev_start(struct adf_accel_dev *accel_dev)
hw_data->enable_error_correction(accel_dev);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(adf_dev_init);
+
+/**
+ * adf_dev_start() - Start acceleration service for the given accel device
+ * @accel_dev: Pointer to acceleration device.
+ *
+ * Function notifies all the registered services that the acceleration device
+ * is ready to be used.
+ * To be used by QAT device specific drivers.
+ *
+ * Return: 0 on success, error code othewise.
+ */
+int adf_dev_start(struct adf_accel_dev *accel_dev)
+{
+ struct service_hndl *service;
+ struct list_head *list_itr;
+
+ set_bit(ADF_STATUS_STARTING, &accel_dev->status);
+
if (adf_ae_start(accel_dev)) {
pr_err("QAT: AE Start Failed\n");
return -EFAULT;
@@ -232,7 +274,6 @@ EXPORT_SYMBOL_GPL(adf_dev_start);
*/
int adf_dev_stop(struct adf_accel_dev *accel_dev)
{
- struct adf_hw_device_data *hw_data = accel_dev->hw_device;
struct service_hndl *service;
struct list_head *list_itr;
int ret, wait = 0;
@@ -241,7 +282,6 @@ int adf_dev_stop(struct adf_accel_dev *accel_dev)
!test_bit(ADF_STATUS_STARTING, &accel_dev->status)) {
return 0;
}
- clear_bit(ADF_STATUS_CONFIGURED, &accel_dev->status);
clear_bit(ADF_STATUS_STARTING, &accel_dev->status);
clear_bit(ADF_STATUS_STARTED, &accel_dev->status);
@@ -285,6 +325,29 @@ int adf_dev_stop(struct adf_accel_dev *accel_dev)
clear_bit(ADF_STATUS_AE_STARTED, &accel_dev->status);
}
+ return 0;
+}
+EXPORT_SYMBOL_GPL(adf_dev_stop);
+
+/**
+ * adf_dev_shutdown() - shutdown acceleration services and data strucutures
+ * @accel_dev: Pointer to acceleration device
+ *
+ * Cleanup the ring data structures and the admin comms and arbitration
+ * services.
+ */
+void adf_dev_shutdown(struct adf_accel_dev *accel_dev)
+{
+ struct adf_hw_device_data *hw_data = accel_dev->hw_device;
+ struct service_hndl *service;
+ struct list_head *list_itr;
+
+ if (!hw_data) {
+ dev_err(&GET_DEV(accel_dev),
+ "QAT: Failed to shutdown device - hw_data not set\n");
+ return;
+ }
+
if (test_bit(ADF_STATUS_AE_UCODE_LOADED, &accel_dev->status)) {
if (adf_ae_fw_release(accel_dev))
pr_err("QAT: Failed to release the ucode\n");
@@ -335,9 +398,15 @@ int adf_dev_stop(struct adf_accel_dev *accel_dev)
if (!test_bit(ADF_STATUS_RESTARTING, &accel_dev->status))
adf_cfg_del_all(accel_dev);
- return 0;
+ if (hw_data->exit_arb)
+ hw_data->exit_arb(accel_dev);
+
+ if (hw_data->exit_admin_comms)
+ hw_data->exit_admin_comms(accel_dev);
+
+ adf_cleanup_etr_data(accel_dev);
}
-EXPORT_SYMBOL_GPL(adf_dev_stop);
+EXPORT_SYMBOL_GPL(adf_dev_shutdown);
int adf_dev_restarting_notify(struct adf_accel_dev *accel_dev)
{
diff --git a/drivers/crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.c b/drivers/crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.c
index ef05825..6a735d5 100644
--- a/drivers/crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.c
+++ b/drivers/crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.c
@@ -46,6 +46,7 @@
*/
#include <adf_accel_devices.h>
#include "adf_dh895xcc_hw_data.h"
+#include "adf_common_drv.h"
#include "adf_drv.h"
/* Worker thread to service arbiter mappings based on dev SKUs */
@@ -182,6 +183,19 @@ static void adf_enable_error_correction(struct adf_accel_dev *accel_dev)
}
}
+static void adf_enable_ints(struct adf_accel_dev *accel_dev)
+{
+ void __iomem *addr;
+
+ addr = (&GET_BARS(accel_dev)[ADF_DH895XCC_PMISC_BAR])->virt_addr;
+
+ /* Enable bundle and misc interrupts */
+ ADF_CSR_WR(addr, ADF_DH895XCC_SMIAPF0_MASK_OFFSET,
+ ADF_DH895XCC_SMIA0_MASK);
+ ADF_CSR_WR(addr, ADF_DH895XCC_SMIAPF1_MASK_OFFSET,
+ ADF_DH895XCC_SMIA1_MASK);
+}
+
void adf_init_hw_data_dh895xcc(struct adf_hw_device_data *hw_data)
{
hw_data->dev_class = &dh895xcc_class;
@@ -206,6 +220,11 @@ void adf_init_hw_data_dh895xcc(struct adf_hw_device_data *hw_data)
hw_data->get_misc_bar_id = get_misc_bar_id;
hw_data->get_sku = get_sku;
hw_data->fw_name = ADF_DH895XCC_FW;
+ hw_data->init_admin_comms = adf_init_admin_comms;
+ hw_data->exit_admin_comms = adf_exit_admin_comms;
+ hw_data->init_arb = adf_init_arb;
+ hw_data->exit_arb = adf_exit_arb;
+ hw_data->enable_ints = adf_enable_ints;
}
void adf_clean_hw_data_dh895xcc(struct adf_hw_device_data *hw_data)
diff --git a/drivers/crypto/qat/qat_dh895xcc/adf_drv.c b/drivers/crypto/qat/qat_dh895xcc/adf_drv.c
index 948f66b..8ffdb95 100644
--- a/drivers/crypto/qat/qat_dh895xcc/adf_drv.c
+++ b/drivers/crypto/qat/qat_dh895xcc/adf_drv.c
@@ -90,9 +90,7 @@ static void adf_cleanup_accel(struct adf_accel_dev *accel_dev)
struct adf_accel_pci *accel_pci_dev = &accel_dev->accel_pci_dev;
int i;
- adf_exit_admin_comms(accel_dev);
- adf_exit_arb(accel_dev);
- adf_cleanup_etr_data(accel_dev);
+ adf_dev_shutdown(accel_dev);
for (i = 0; i < ADF_PCI_MAX_BARS; i++) {
struct adf_bar *bar = &accel_pci_dev->pci_bars[i];
@@ -119,7 +117,7 @@ static void adf_cleanup_accel(struct adf_accel_dev *accel_dev)
kfree(accel_dev);
}
-static int qat_dev_start(struct adf_accel_dev *accel_dev)
+static int adf_dev_configure(struct adf_accel_dev *accel_dev)
{
int cpus = num_online_cpus();
int banks = GET_MAX_BANKS(accel_dev);
@@ -206,7 +204,7 @@ static int qat_dev_start(struct adf_accel_dev *accel_dev)
goto err;
set_bit(ADF_STATUS_CONFIGURED, &accel_dev->status);
- return adf_dev_start(accel_dev);
+ return 0;
err:
dev_err(&GET_DEV(accel_dev), "Failed to start QAT accel dev\n");
return -EINVAL;
@@ -217,7 +215,6 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct adf_accel_dev *accel_dev;
struct adf_accel_pci *accel_pci_dev;
struct adf_hw_device_data *hw_data;
- void __iomem *pmisc_bar_addr = NULL;
char name[ADF_DEVICE_NAME_LENGTH];
unsigned int i, bar_nr;
int ret;
@@ -347,8 +344,6 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ret = -EFAULT;
goto out_err;
}
- if (i == ADF_DH895XCC_PMISC_BAR)
- pmisc_bar_addr = bar->virt_addr;
}
pci_set_master(pdev);
@@ -358,36 +353,21 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto out_err;
}
- if (adf_init_etr_data(accel_dev)) {
- dev_err(&pdev->dev, "Failed initialize etr\n");
- ret = -EFAULT;
- goto out_err;
- }
-
- if (adf_init_admin_comms(accel_dev)) {
- dev_err(&pdev->dev, "Failed initialize admin comms\n");
- ret = -EFAULT;
- goto out_err;
- }
-
- if (adf_init_arb(accel_dev)) {
- dev_err(&pdev->dev, "Failed initialize hw arbiter\n");
- ret = -EFAULT;
- goto out_err;
- }
if (pci_save_state(pdev)) {
dev_err(&pdev->dev, "Failed to save pci state\n");
ret = -ENOMEM;
goto out_err;
}
- /* Enable bundle and misc interrupts */
- ADF_CSR_WR(pmisc_bar_addr, ADF_DH895XCC_SMIAPF0_MASK_OFFSET,
- ADF_DH895XCC_SMIA0_MASK);
- ADF_CSR_WR(pmisc_bar_addr, ADF_DH895XCC_SMIAPF1_MASK_OFFSET,
- ADF_DH895XCC_SMIA1_MASK);
+ ret = adf_dev_configure(accel_dev);
+ if (ret)
+ goto out_err;
+
+ ret = adf_dev_init(accel_dev);
+ if (ret)
+ goto out_err;
- ret = qat_dev_start(accel_dev);
+ ret = adf_dev_start(accel_dev);
if (ret) {
adf_dev_stop(accel_dev);
goto out_err;
next reply other threads:[~2015-01-09 19:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-09 19:54 Bruce Allan [this message]
2015-01-13 11:33 ` crypto: qat - fix device reset flow Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150109195457.28205.23092.stgit@gitlad.jf.intel.com \
--to=bruce.w.allan@intel.com \
--cc=linux-crypto@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.