All of lore.kernel.org
 help / color / mirror / Atom feed
From: boris.brezillon@free-electrons.com (Boris Brezillon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/7] AT91 cleanup for 3.20 #1
Date: Mon, 12 Jan 2015 20:26:03 +0100	[thread overview]
Message-ID: <20150112202603.6a7b691d@bbrezillon> (raw)
In-Reply-To: <1421088136-10172-1-git-send-email-alexandre.belloni@free-electrons.com>

Hi Alexandre,

On Mon, 12 Jan 2015 19:42:09 +0100
Alexandre Belloni <alexandre.belloni@free-electrons.com> wrote:

> Hi,
> 
> This patch set cleans a lot of remaining header, config options and functions
> that are not used anymore since the switch to DT only.
> 
> Patch 5 is moving mach/debug-macro.S to include/debug/at91.S to prepare the
> upcoming switch to multiplatform.
> 

Thanks for those cleanup changes.

To the whole series:

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> 
> Alexandre Belloni (7):
>   ARM: at91: remove unused mach/memory.h
>   ARM: at91: remove useless config MACH_AT91RM9200_DT
>   ARM: at91: remove useless config MACH_AT91SAM9_DT
>   ARM: at91: remove useless at91_sysirq_mask_rtx
>   ARM: at91: move debug-macro.S into the common space
>   ARM: at91: remove useless at91rm9200_dt_initialize()
>   ARM: at91: remove useless at91rm9200_set_type()
> 
>  MAINTAINERS                                        |  1 +
>  arch/arm/Kconfig.debug                             |  9 ++-
>  .../mach/debug-macro.S => include/debug/at91.S}    | 19 +++---
>  arch/arm/mach-at91/Kconfig                         |  8 ---
>  arch/arm/mach-at91/Makefile                        |  6 +-
>  arch/arm/mach-at91/at91sam9260.c                   |  2 -
>  arch/arm/mach-at91/at91sam9261.c                   |  2 -
>  arch/arm/mach-at91/at91sam9263.c                   |  3 -
>  arch/arm/mach-at91/at91sam9g45.c                   |  3 -
>  arch/arm/mach-at91/at91sam9n12.c                   |  6 --
>  arch/arm/mach-at91/at91sam9rl.c                    |  3 -
>  arch/arm/mach-at91/at91sam9x5.c                    | 10 ---
>  arch/arm/mach-at91/board-dt-rm9200.c               |  2 +-
>  arch/arm/mach-at91/generic.h                       |  6 --
>  arch/arm/mach-at91/include/mach/at91_rtt.h         | 35 ----------
>  arch/arm/mach-at91/include/mach/memory.h           | 26 --------
>  arch/arm/mach-at91/sama5d3.c                       |  6 --
>  arch/arm/mach-at91/setup.c                         | 18 ------
>  arch/arm/mach-at91/sysirq_mask.c                   | 75 ----------------------
>  19 files changed, 23 insertions(+), 217 deletions(-)
>  rename arch/arm/{mach-at91/include/mach/debug-macro.S => include/debug/at91.S} (68%)
>  delete mode 100644 arch/arm/mach-at91/include/mach/at91_rtt.h
>  delete mode 100644 arch/arm/mach-at91/include/mach/memory.h
>  delete mode 100644 arch/arm/mach-at91/sysirq_mask.c
> 



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

WARNING: multiple messages have this Message-ID (diff)
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/7] AT91 cleanup for 3.20 #1
Date: Mon, 12 Jan 2015 20:26:03 +0100	[thread overview]
Message-ID: <20150112202603.6a7b691d@bbrezillon> (raw)
In-Reply-To: <1421088136-10172-1-git-send-email-alexandre.belloni@free-electrons.com>

Hi Alexandre,

On Mon, 12 Jan 2015 19:42:09 +0100
Alexandre Belloni <alexandre.belloni@free-electrons.com> wrote:

> Hi,
> 
> This patch set cleans a lot of remaining header, config options and functions
> that are not used anymore since the switch to DT only.
> 
> Patch 5 is moving mach/debug-macro.S to include/debug/at91.S to prepare the
> upcoming switch to multiplatform.
> 

Thanks for those cleanup changes.

To the whole series:

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> 
> Alexandre Belloni (7):
>   ARM: at91: remove unused mach/memory.h
>   ARM: at91: remove useless config MACH_AT91RM9200_DT
>   ARM: at91: remove useless config MACH_AT91SAM9_DT
>   ARM: at91: remove useless at91_sysirq_mask_rtx
>   ARM: at91: move debug-macro.S into the common space
>   ARM: at91: remove useless at91rm9200_dt_initialize()
>   ARM: at91: remove useless at91rm9200_set_type()
> 
>  MAINTAINERS                                        |  1 +
>  arch/arm/Kconfig.debug                             |  9 ++-
>  .../mach/debug-macro.S => include/debug/at91.S}    | 19 +++---
>  arch/arm/mach-at91/Kconfig                         |  8 ---
>  arch/arm/mach-at91/Makefile                        |  6 +-
>  arch/arm/mach-at91/at91sam9260.c                   |  2 -
>  arch/arm/mach-at91/at91sam9261.c                   |  2 -
>  arch/arm/mach-at91/at91sam9263.c                   |  3 -
>  arch/arm/mach-at91/at91sam9g45.c                   |  3 -
>  arch/arm/mach-at91/at91sam9n12.c                   |  6 --
>  arch/arm/mach-at91/at91sam9rl.c                    |  3 -
>  arch/arm/mach-at91/at91sam9x5.c                    | 10 ---
>  arch/arm/mach-at91/board-dt-rm9200.c               |  2 +-
>  arch/arm/mach-at91/generic.h                       |  6 --
>  arch/arm/mach-at91/include/mach/at91_rtt.h         | 35 ----------
>  arch/arm/mach-at91/include/mach/memory.h           | 26 --------
>  arch/arm/mach-at91/sama5d3.c                       |  6 --
>  arch/arm/mach-at91/setup.c                         | 18 ------
>  arch/arm/mach-at91/sysirq_mask.c                   | 75 ----------------------
>  19 files changed, 23 insertions(+), 217 deletions(-)
>  rename arch/arm/{mach-at91/include/mach/debug-macro.S => include/debug/at91.S} (68%)
>  delete mode 100644 arch/arm/mach-at91/include/mach/at91_rtt.h
>  delete mode 100644 arch/arm/mach-at91/include/mach/memory.h
>  delete mode 100644 arch/arm/mach-at91/sysirq_mask.c
> 



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

  parent reply	other threads:[~2015-01-12 19:26 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-12 18:42 [PATCH 0/7] AT91 cleanup for 3.20 #1 Alexandre Belloni
2015-01-12 18:42 ` Alexandre Belloni
2015-01-12 18:42 ` [PATCH 1/7] ARM: at91: remove unused mach/memory.h Alexandre Belloni
2015-01-12 18:42   ` Alexandre Belloni
2015-01-12 18:42 ` [PATCH 2/7] ARM: at91: remove useless config MACH_AT91RM9200_DT Alexandre Belloni
2015-01-12 18:42   ` Alexandre Belloni
2015-01-12 18:42 ` [PATCH 3/7] ARM: at91: remove useless config MACH_AT91SAM9_DT Alexandre Belloni
2015-01-12 18:42   ` Alexandre Belloni
2015-01-12 18:42 ` [PATCH 4/7] ARM: at91: remove useless at91_sysirq_mask_rtx Alexandre Belloni
2015-01-12 18:42   ` Alexandre Belloni
2015-01-12 18:42 ` [PATCH 5/7] ARM: at91: move debug-macro.S into the common space Alexandre Belloni
2015-01-12 18:42   ` Alexandre Belloni
2015-01-20  9:23   ` Paul Bolle
2015-01-20  9:23     ` Paul Bolle
2015-01-20 10:54     ` [PATCH] ARM: at91: fix Kconfig.debug by adding DEBUG_AT91_UART option Nicolas Ferre
2015-01-20 10:54       ` Nicolas Ferre
2015-01-23 23:03       ` Olof Johansson
2015-01-23 23:03         ` Olof Johansson
2015-01-12 18:42 ` [PATCH 6/7] ARM: at91: remove useless at91rm9200_dt_initialize() Alexandre Belloni
2015-01-12 18:42   ` Alexandre Belloni
2015-01-13  1:24   ` Bo Shen
2015-01-13  1:24     ` Bo Shen
2015-01-13 15:58     ` Nicolas Ferre
2015-01-13 15:58       ` Nicolas Ferre
2015-01-12 18:42 ` [PATCH 7/7] ARM: at91: remove useless at91rm9200_set_type() Alexandre Belloni
2015-01-12 18:42   ` Alexandre Belloni
2015-01-12 19:26 ` Boris Brezillon [this message]
2015-01-12 19:26   ` [PATCH 0/7] AT91 cleanup for 3.20 #1 Boris Brezillon
2015-01-15 14:09   ` Nicolas Ferre
2015-01-15 14:09     ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150112202603.6a7b691d@bbrezillon \
    --to=boris.brezillon@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.