Re: [PATCH v2 0/4] Add support for kosagi novena

[Bjorn Helgaas <bhelgaas@google.com>]

On Mon, Dec 22, 2014 at 04:32:03PM +0800, Sean Cross wrote:
> The Kosagi Novena mainboard contains an i.MX6, along with a PCI Express slot.
> This patchset adds regulator support to the PCI Express slot, and adds
> device tree support for the Novena mainboard.
> 
> Changes since v1:
>     - Add 'kosagi' to vendor prefixes
>     - Add LCD panel to simple-panel
>     - Renamed power-supply to bus-supply
>     - Replaced devm_regulator_get() with devm_regulator_get_optional()
>     - Moved regulator_enable to imx6_add_pcie_port()
>     - Removed fpga@1 from spi definition in dts -- will use overlays instead
> 
> Sean Cross (4):
>   drm/panel: simple: Add Innolux N133HSE panel support
>   devicetree: bindings: Add vendor prefix for Kosagi
>   PCI: imx6: Add power-supply support

I guess we're waiting on a response to Arnd's question about making this
more generic, so I'm dropping these from my queue pending that.

Then we need a strategy for merging it since it crosses PCI/ARM/GPU.
Please propose a strategy; it looks like the PCI part doesn't technically
depend on the preceeding patches, but it's fine with me if you want to keep
it all together.

>   ARM: dts: imx6q: add Novena board
> 
>  .../devicetree/bindings/pci/fsl,imx6q-pcie.txt     |   3 +
>  .../devicetree/bindings/vendor-prefixes.txt        |   1 +
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/imx6q-novena.dts                 | 856 +++++++++++++++++++++
>  drivers/gpu/drm/panel/panel-simple.c               |  26 +
>  drivers/pci/host/pci-imx6.c                        |  27 +
>  6 files changed, 914 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6q-novena.dts
> 
> -- 
> 2.1.3
>