From: Lee Jones <lee.jones@linaro.org>
To: micky_ching@realsil.com.cn
Cc: sameo@linux.intel.com, devel@linuxdriverproject.org,
linux-kernel@vger.kernel.org, gregkh@linuxfoundation.org,
rogerable@realtek.com, wei_wang@realsil.com.cn
Subject: Re: [PATCH 01/10] mfd: rtsx: replace TAB by SPC after #define
Date: Sun, 18 Jan 2015 12:39:49 +0000 [thread overview]
Message-ID: <20150118123837.GR3574@x1> (raw)
In-Reply-To: <48abf73da65a522c3b7123d958866984271e4bd8.1421320541.git.micky_ching@realsil.com.cn>
On Thu, 15 Jan 2015, micky_ching@realsil.com.cn wrote:
> From: Micky Ching <micky_ching@realsil.com.cn>
>
> Re-format coding-style, using uniform SPC after "#define" keyword
> instead of mixing using TAB and SPC.
Tabs and spaces in this context usually have different meanings
i.e. space after #define usually denotes that the following define is
a register address, whereas a tab commonly describes a bit field.
Please ensure you're not messing with these conventions. By the looks
of it you are not, but I need you to confirm that you know what you're
doing.
> Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
> ---
> include/linux/mfd/rtsx_pci.h | 254 +++++++++++++++++++++----------------------
> 1 file changed, 127 insertions(+), 127 deletions(-)
>
> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
> index 0c12628..a9c2a14 100644
> --- a/include/linux/mfd/rtsx_pci.h
> +++ b/include/linux/mfd/rtsx_pci.h
> @@ -175,9 +175,9 @@
> /* CARD_SHARE_MODE */
> #define CARD_SHARE_MASK 0x0F
> #define CARD_SHARE_MULTI_LUN 0x00
> -#define CARD_SHARE_NORMAL 0x00
> -#define CARD_SHARE_48_SD 0x04
> -#define CARD_SHARE_48_MS 0x08
> +#define CARD_SHARE_NORMAL 0x00
> +#define CARD_SHARE_48_SD 0x04
> +#define CARD_SHARE_48_MS 0x08
> /* CARD_SHARE_MODE for barossa */
> #define CARD_SHARE_BAROSSA_SD 0x01
> #define CARD_SHARE_BAROSSA_MS 0x02
> @@ -249,76 +249,76 @@
> #define CD_AUTO_DISABLE 0x40
>
> /* SD_STAT1 */
> -#define SD_CRC7_ERR 0x80
> -#define SD_CRC16_ERR 0x40
> -#define SD_CRC_WRITE_ERR 0x20
> -#define SD_CRC_WRITE_ERR_MASK 0x1C
> -#define GET_CRC_TIME_OUT 0x02
> -#define SD_TUNING_COMPARE_ERR 0x01
> +#define SD_CRC7_ERR 0x80
> +#define SD_CRC16_ERR 0x40
> +#define SD_CRC_WRITE_ERR 0x20
> +#define SD_CRC_WRITE_ERR_MASK 0x1C
> +#define GET_CRC_TIME_OUT 0x02
> +#define SD_TUNING_COMPARE_ERR 0x01
>
> /* SD_STAT2 */
> -#define SD_RSP_80CLK_TIMEOUT 0x01
> +#define SD_RSP_80CLK_TIMEOUT 0x01
>
> /* SD_BUS_STAT */
> -#define SD_CLK_TOGGLE_EN 0x80
> -#define SD_CLK_FORCE_STOP 0x40
> -#define SD_DAT3_STATUS 0x10
> -#define SD_DAT2_STATUS 0x08
> -#define SD_DAT1_STATUS 0x04
> -#define SD_DAT0_STATUS 0x02
> -#define SD_CMD_STATUS 0x01
> +#define SD_CLK_TOGGLE_EN 0x80
> +#define SD_CLK_FORCE_STOP 0x40
> +#define SD_DAT3_STATUS 0x10
> +#define SD_DAT2_STATUS 0x08
> +#define SD_DAT1_STATUS 0x04
> +#define SD_DAT0_STATUS 0x02
> +#define SD_CMD_STATUS 0x01
>
> /* SD_PAD_CTL */
> -#define SD_IO_USING_1V8 0x80
> -#define SD_IO_USING_3V3 0x7F
> -#define TYPE_A_DRIVING 0x00
> -#define TYPE_B_DRIVING 0x01
> -#define TYPE_C_DRIVING 0x02
> -#define TYPE_D_DRIVING 0x03
> +#define SD_IO_USING_1V8 0x80
> +#define SD_IO_USING_3V3 0x7F
> +#define TYPE_A_DRIVING 0x00
> +#define TYPE_B_DRIVING 0x01
> +#define TYPE_C_DRIVING 0x02
> +#define TYPE_D_DRIVING 0x03
>
> /* SD_SAMPLE_POINT_CTL */
> -#define DDR_FIX_RX_DAT 0x00
> -#define DDR_VAR_RX_DAT 0x80
> -#define DDR_FIX_RX_DAT_EDGE 0x00
> -#define DDR_FIX_RX_DAT_14_DELAY 0x40
> -#define DDR_FIX_RX_CMD 0x00
> -#define DDR_VAR_RX_CMD 0x20
> -#define DDR_FIX_RX_CMD_POS_EDGE 0x00
> -#define DDR_FIX_RX_CMD_14_DELAY 0x10
> -#define SD20_RX_POS_EDGE 0x00
> -#define SD20_RX_14_DELAY 0x08
> +#define DDR_FIX_RX_DAT 0x00
> +#define DDR_VAR_RX_DAT 0x80
> +#define DDR_FIX_RX_DAT_EDGE 0x00
> +#define DDR_FIX_RX_DAT_14_DELAY 0x40
> +#define DDR_FIX_RX_CMD 0x00
> +#define DDR_VAR_RX_CMD 0x20
> +#define DDR_FIX_RX_CMD_POS_EDGE 0x00
> +#define DDR_FIX_RX_CMD_14_DELAY 0x10
> +#define SD20_RX_POS_EDGE 0x00
> +#define SD20_RX_14_DELAY 0x08
> #define SD20_RX_SEL_MASK 0x08
>
> /* SD_PUSH_POINT_CTL */
> -#define DDR_FIX_TX_CMD_DAT 0x00
> -#define DDR_VAR_TX_CMD_DAT 0x80
> -#define DDR_FIX_TX_DAT_14_TSU 0x00
> -#define DDR_FIX_TX_DAT_12_TSU 0x40
> -#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
> -#define DDR_FIX_TX_CMD_14_AHEAD 0x20
> -#define SD20_TX_NEG_EDGE 0x00
> -#define SD20_TX_14_AHEAD 0x10
> +#define DDR_FIX_TX_CMD_DAT 0x00
> +#define DDR_VAR_TX_CMD_DAT 0x80
> +#define DDR_FIX_TX_DAT_14_TSU 0x00
> +#define DDR_FIX_TX_DAT_12_TSU 0x40
> +#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
> +#define DDR_FIX_TX_CMD_14_AHEAD 0x20
> +#define SD20_TX_NEG_EDGE 0x00
> +#define SD20_TX_14_AHEAD 0x10
> #define SD20_TX_SEL_MASK 0x10
> -#define DDR_VAR_SDCLK_POL_SWAP 0x01
> +#define DDR_VAR_SDCLK_POL_SWAP 0x01
>
> /* SD_TRANSFER */
> -#define SD_TRANSFER_START 0x80
> -#define SD_TRANSFER_END 0x40
> +#define SD_TRANSFER_START 0x80
> +#define SD_TRANSFER_END 0x40
> #define SD_STAT_IDLE 0x20
> -#define SD_TRANSFER_ERR 0x10
> +#define SD_TRANSFER_ERR 0x10
> /* SD Transfer Mode definition */
> -#define SD_TM_NORMAL_WRITE 0x00
> -#define SD_TM_AUTO_WRITE_3 0x01
> -#define SD_TM_AUTO_WRITE_4 0x02
> -#define SD_TM_AUTO_READ_3 0x05
> -#define SD_TM_AUTO_READ_4 0x06
> -#define SD_TM_CMD_RSP 0x08
> -#define SD_TM_AUTO_WRITE_1 0x09
> -#define SD_TM_AUTO_WRITE_2 0x0A
> -#define SD_TM_NORMAL_READ 0x0C
> -#define SD_TM_AUTO_READ_1 0x0D
> -#define SD_TM_AUTO_READ_2 0x0E
> -#define SD_TM_AUTO_TUNING 0x0F
> +#define SD_TM_NORMAL_WRITE 0x00
> +#define SD_TM_AUTO_WRITE_3 0x01
> +#define SD_TM_AUTO_WRITE_4 0x02
> +#define SD_TM_AUTO_READ_3 0x05
> +#define SD_TM_AUTO_READ_4 0x06
> +#define SD_TM_CMD_RSP 0x08
> +#define SD_TM_AUTO_WRITE_1 0x09
> +#define SD_TM_AUTO_WRITE_2 0x0A
> +#define SD_TM_NORMAL_READ 0x0C
> +#define SD_TM_AUTO_READ_1 0x0D
> +#define SD_TM_AUTO_READ_2 0x0E
> +#define SD_TM_AUTO_TUNING 0x0F
>
> /* SD_VPTX_CTL / SD_VPRX_CTL */
> #define PHASE_CHANGE 0x80
> @@ -332,15 +332,15 @@
>
> /* SD Configure 1 Register */
> #define SD_CLK_DIVIDE_0 0x00
> -#define SD_CLK_DIVIDE_256 0xC0
> -#define SD_CLK_DIVIDE_128 0x80
> -#define SD_BUS_WIDTH_1BIT 0x00
> -#define SD_BUS_WIDTH_4BIT 0x01
> -#define SD_BUS_WIDTH_8BIT 0x02
> -#define SD_ASYNC_FIFO_NOT_RST 0x10
> -#define SD_20_MODE 0x00
> -#define SD_DDR_MODE 0x04
> -#define SD_30_MODE 0x08
> +#define SD_CLK_DIVIDE_256 0xC0
> +#define SD_CLK_DIVIDE_128 0x80
> +#define SD_BUS_WIDTH_1BIT 0x00
> +#define SD_BUS_WIDTH_4BIT 0x01
> +#define SD_BUS_WIDTH_8BIT 0x02
> +#define SD_ASYNC_FIFO_NOT_RST 0x10
> +#define SD_20_MODE 0x00
> +#define SD_DDR_MODE 0x04
> +#define SD_30_MODE 0x08
>
> #define SD_CLK_DIVIDE_MASK 0xC0
>
> @@ -415,71 +415,71 @@
> #define CLK_DIV_8 0x04
>
> /* MS_CFG */
> -#define SAMPLE_TIME_RISING 0x00
> -#define SAMPLE_TIME_FALLING 0x80
> -#define PUSH_TIME_DEFAULT 0x00
> -#define PUSH_TIME_ODD 0x40
> -#define NO_EXTEND_TOGGLE 0x00
> -#define EXTEND_TOGGLE_CHK 0x20
> -#define MS_BUS_WIDTH_1 0x00
> -#define MS_BUS_WIDTH_4 0x10
> -#define MS_BUS_WIDTH_8 0x18
> -#define MS_2K_SECTOR_MODE 0x04
> -#define MS_512_SECTOR_MODE 0x00
> -#define MS_TOGGLE_TIMEOUT_EN 0x00
> -#define MS_TOGGLE_TIMEOUT_DISEN 0x01
> +#define SAMPLE_TIME_RISING 0x00
> +#define SAMPLE_TIME_FALLING 0x80
> +#define PUSH_TIME_DEFAULT 0x00
> +#define PUSH_TIME_ODD 0x40
> +#define NO_EXTEND_TOGGLE 0x00
> +#define EXTEND_TOGGLE_CHK 0x20
> +#define MS_BUS_WIDTH_1 0x00
> +#define MS_BUS_WIDTH_4 0x10
> +#define MS_BUS_WIDTH_8 0x18
> +#define MS_2K_SECTOR_MODE 0x04
> +#define MS_512_SECTOR_MODE 0x00
> +#define MS_TOGGLE_TIMEOUT_EN 0x00
> +#define MS_TOGGLE_TIMEOUT_DISEN 0x01
> #define MS_NO_CHECK_INT 0x02
>
> /* MS_TRANS_CFG */
> -#define WAIT_INT 0x80
> -#define NO_WAIT_INT 0x00
> -#define NO_AUTO_READ_INT_REG 0x00
> -#define AUTO_READ_INT_REG 0x40
> -#define MS_CRC16_ERR 0x20
> -#define MS_RDY_TIMEOUT 0x10
> -#define MS_INT_CMDNK 0x08
> -#define MS_INT_BREQ 0x04
> -#define MS_INT_ERR 0x02
> -#define MS_INT_CED 0x01
> +#define WAIT_INT 0x80
> +#define NO_WAIT_INT 0x00
> +#define NO_AUTO_READ_INT_REG 0x00
> +#define AUTO_READ_INT_REG 0x40
> +#define MS_CRC16_ERR 0x20
> +#define MS_RDY_TIMEOUT 0x10
> +#define MS_INT_CMDNK 0x08
> +#define MS_INT_BREQ 0x04
> +#define MS_INT_ERR 0x02
> +#define MS_INT_CED 0x01
>
> /* MS_TRANSFER */
> -#define MS_TRANSFER_START 0x80
> -#define MS_TRANSFER_END 0x40
> -#define MS_TRANSFER_ERR 0x20
> -#define MS_BS_STATE 0x10
> -#define MS_TM_READ_BYTES 0x00
> -#define MS_TM_NORMAL_READ 0x01
> -#define MS_TM_WRITE_BYTES 0x04
> -#define MS_TM_NORMAL_WRITE 0x05
> -#define MS_TM_AUTO_READ 0x08
> -#define MS_TM_AUTO_WRITE 0x0C
> +#define MS_TRANSFER_START 0x80
> +#define MS_TRANSFER_END 0x40
> +#define MS_TRANSFER_ERR 0x20
> +#define MS_BS_STATE 0x10
> +#define MS_TM_READ_BYTES 0x00
> +#define MS_TM_NORMAL_READ 0x01
> +#define MS_TM_WRITE_BYTES 0x04
> +#define MS_TM_NORMAL_WRITE 0x05
> +#define MS_TM_AUTO_READ 0x08
> +#define MS_TM_AUTO_WRITE 0x0C
>
> /* SD Configure 2 Register */
> -#define SD_CALCULATE_CRC7 0x00
> -#define SD_NO_CALCULATE_CRC7 0x80
> -#define SD_CHECK_CRC16 0x00
> -#define SD_NO_CHECK_CRC16 0x40
> +#define SD_CALCULATE_CRC7 0x00
> +#define SD_NO_CALCULATE_CRC7 0x80
> +#define SD_CHECK_CRC16 0x00
> +#define SD_NO_CHECK_CRC16 0x40
> #define SD_NO_CHECK_WAIT_CRC_TO 0x20
> -#define SD_WAIT_BUSY_END 0x08
> -#define SD_NO_WAIT_BUSY_END 0x00
> -#define SD_CHECK_CRC7 0x00
> -#define SD_NO_CHECK_CRC7 0x04
> -#define SD_RSP_LEN_0 0x00
> -#define SD_RSP_LEN_6 0x01
> -#define SD_RSP_LEN_17 0x02
> +#define SD_WAIT_BUSY_END 0x08
> +#define SD_NO_WAIT_BUSY_END 0x00
> +#define SD_CHECK_CRC7 0x00
> +#define SD_NO_CHECK_CRC7 0x04
> +#define SD_RSP_LEN_0 0x00
> +#define SD_RSP_LEN_6 0x01
> +#define SD_RSP_LEN_17 0x02
> /* SD/MMC Response Type Definition */
> -#define SD_RSP_TYPE_R0 0x04
> -#define SD_RSP_TYPE_R1 0x01
> -#define SD_RSP_TYPE_R1b 0x09
> -#define SD_RSP_TYPE_R2 0x02
> -#define SD_RSP_TYPE_R3 0x05
> -#define SD_RSP_TYPE_R4 0x05
> -#define SD_RSP_TYPE_R5 0x01
> -#define SD_RSP_TYPE_R6 0x01
> -#define SD_RSP_TYPE_R7 0x01
> +#define SD_RSP_TYPE_R0 0x04
> +#define SD_RSP_TYPE_R1 0x01
> +#define SD_RSP_TYPE_R1b 0x09
> +#define SD_RSP_TYPE_R2 0x02
> +#define SD_RSP_TYPE_R3 0x05
> +#define SD_RSP_TYPE_R4 0x05
> +#define SD_RSP_TYPE_R5 0x01
> +#define SD_RSP_TYPE_R6 0x01
> +#define SD_RSP_TYPE_R7 0x01
>
> /* SD_CONFIGURE3 */
> -#define SD_RSP_80CLK_TIMEOUT_EN 0x01
> +#define SD_RSP_80CLK_TIMEOUT_EN 0x01
>
> /* Card Transfer Reset Register */
> #define SPI_STOP 0x01
> @@ -574,13 +574,13 @@
>
> #define SRCTL 0xFC13
>
> -#define DCM_DRP_CTL 0xFC23
> -#define DCM_DRP_TRIG 0xFC24
> -#define DCM_DRP_CFG 0xFC25
> -#define DCM_DRP_WR_DATA_L 0xFC26
> -#define DCM_DRP_WR_DATA_H 0xFC27
> -#define DCM_DRP_RD_DATA_L 0xFC28
> -#define DCM_DRP_RD_DATA_H 0xFC29
> +#define DCM_DRP_CTL 0xFC23
> +#define DCM_DRP_TRIG 0xFC24
> +#define DCM_DRP_CFG 0xFC25
> +#define DCM_DRP_WR_DATA_L 0xFC26
> +#define DCM_DRP_WR_DATA_H 0xFC27
> +#define DCM_DRP_RD_DATA_L 0xFC28
> +#define DCM_DRP_RD_DATA_H 0xFC29
> #define SD_VPCLK0_CTL 0xFC2A
> #define SD_VPCLK1_CTL 0xFC2B
> #define SD_DCMPS0_CTL 0xFC2C
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-01-18 12:40 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-15 11:18 [PATCH 00/10] mfd: rtsx: add support for new rts524A and rts525A micky_ching
2015-01-15 11:18 ` [PATCH 01/10] mfd: rtsx: replace TAB by SPC after #define micky_ching
2015-01-18 12:39 ` Lee Jones [this message]
2015-01-19 1:23 ` 敬锐
2015-01-19 7:49 ` Lee Jones
2015-01-15 11:18 ` [PATCH 02/10] mfd: rtsx: place register address and values togather micky_ching
2015-01-18 12:35 ` Lee Jones
2015-01-15 11:19 ` [PATCH 03/10] mfd: rtsx: add debug info when access register failed micky_ching
2015-01-18 12:35 ` Lee Jones
2015-01-15 11:19 ` [PATCH 04/10] mfd: rtsx: update PETXCFG address micky_ching
2015-01-18 12:31 ` Lee Jones
2015-01-15 11:19 ` [PATCH 05/10] mfd: rtsx: update driving settings micky_ching
2015-01-18 12:32 ` Lee Jones
2015-01-15 11:19 ` [PATCH 06/10] mfd: rtsx: update phy register micky_ching
2015-01-18 12:29 ` Lee Jones
2015-01-19 1:55 ` 敬锐
2015-01-19 7:47 ` Lee Jones
2015-01-20 2:07 ` 敬锐
2015-01-20 9:45 ` Lee Jones
2015-01-15 11:19 ` [PATCH 07/10] mfd: rtsx: remove LCTLR defination micky_ching
2015-01-18 12:28 ` Lee Jones
2015-01-19 1:12 ` 敬锐
2015-01-19 8:06 ` Lee Jones
2015-01-15 11:19 ` [PATCH 08/10] mfd: rtsx: add support for rts524A micky_ching
2015-01-18 12:20 ` Lee Jones
2015-01-19 2:32 ` 敬锐
2015-01-19 2:36 ` 敬锐
2015-01-19 7:40 ` Lee Jones
2015-01-19 3:09 ` 敬锐
2015-01-19 7:38 ` Lee Jones
2015-01-15 11:19 ` [PATCH 09/10] mfd: rtsx: add support for rts525A micky_ching
2015-01-18 11:13 ` Lee Jones
2015-01-19 2:53 ` 敬锐
2015-01-19 7:41 ` Lee Jones
2015-01-15 11:19 ` [PATCH 10/10] mfd: rtsx: using pcr_dbg replace dev_dbg micky_ching
2015-01-18 10:43 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150118123837.GR3574@x1 \
--to=lee.jones@linaro.org \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=micky_ching@realsil.com.cn \
--cc=rogerable@realtek.com \
--cc=sameo@linux.intel.com \
--cc=wei_wang@realsil.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.