From: Martin Jansa <martin.jansa@gmail.com>
To: Simon Bolek <simon.bolek@googlemail.com>
Cc: yocto@yoctoproject.org, peterengcomau001@adam.com.au
Subject: Re: meta-qt5 problem in yocto 1.7
Date: Wed, 28 Jan 2015 20:54:12 +0100 [thread overview]
Message-ID: <20150128195412.GJ2477@jama> (raw)
In-Reply-To: <CAEfap_A5KbwEFkXCiz8uiGiH3_F2FBWSOUzwFFnfg-c+CeUWbA@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 9213 bytes --]
On Wed, Jan 28, 2015 at 07:31:35PM +0100, Simon Bolek wrote:
> Hi Lachlan,
I'm getting lost in HTML format of previous message so I'll just reply
on top :/.
The redirect should be fine, but sometimes it gives you broken mirror.
e.g. today I've seen couple of 5.1.1 builds fail to fetch, because they
were redirected to http://mirrors.neusoft.edu.cn which was returning
HTTP 500.
git recipes in older branches are also working only from already
populated premirror, because upstream renamed 5.[012] branches to
old/5.[012], that's why it shows current SRCREV to exist in origin/5.4
(after you call "git remote prune origin")
I've just cherry-picked
pick 76af63c qt3d: change to 'dev' branch
from master to dizzy to fix qt3d branch.
Similar problem exist in qtwayland recipes where the branches were also
rewritten and pruned when first 5.4 release was created.
If you find issue like this, just update the branch parameter (based on
git branch -a --contains <srcrev> and send me the patch (as described in
README). Such fixes are perfectly fine for meta-qt5 release branches.
Regards,
> There is a redirection, yes, and this should not be a problem, as far as
> I'm concerned. Why it does not work for those particular recipes of yours,
> i have no clue. BUT, what I would do, is to bitbake <recipe-by-recipe>
> trying to narrow down the problem.
> When you still have problems when bitbaking single recipes, you might try
> to override the SRC_URI from qt5-{PV}.inc (in my case qt5-5.3.2.inc, yours
> might be different)
>
> Whether those are reasonalble advices, well, I am not 100% sure, but maybe
> Martin Jansa would help here. I also have some problems with generating
> meta-toolchain-qt5, which I already posted here.
>
>
> @Martin: i was so bold to email you directly. I apoligize if this is not
> welcome, please correct me and i will not do this again.
>
> best regards
> simon :-)
>
> Message: 7
> > Date: Tue, 27 Jan 2015 01:32:43 +1030
> > From: peterengcomau001@adam.com.au [4]
> > To: yocto@yoctoproject.org [5]
> > Subject: [yocto] meta-qt5 problem in yocto 1.7
> > Message-ID:
> > ? ? ? ?
> > Content-Type: text/plain; charset="utf-8"
> >
> > I have just downloaded yocto poky 1.7 and try to build an image. I
> > get
> > teh follwing problems with fetching qt5 source:
> > Summary: 5 tasks failed:
> > ? /home/lachlan/poky-1.7/meta-qt5/recipes-qt/qt5/qt3d_git.bb,
> > do_fetch
> > ?
> >
> > /home/lachlan/poky-1.7/meta-qt5/recipes-qt/qt5/qtmultimedia_5.3.2.bb,
> > do_fetch
> > ? /home/lachlan/poky-1.7/meta-qt5/recipes-qt/qt5/qtwebkit_5.3.2.bb,
> > do_fetch
> > ?
> >
> > /home/lachlan/poky-1.7/meta-atmel/recipes-multimedia/gstreamer1.0-plugins/
> > gstreamer1.0-plugins-hantro_1.0.bb,
> > do_configure
> > ?
> >
> > /home/lachlan/poky-1.7/meta-atmel/recipes-utils/obp-utils/obp-utils_git.bb
> > ,
> > do_install
> >
> > I presume the last two problems(do_configure & do_install)? result
> > from dependencies on the previous three failed fetches.
> >
> > The more complete error code for teh first three errors is:
> > WARNING: Failed to fetch URL
> > git://qt.gitorious.org/qt/qt3d.git;branch=master [7], attempting
> > MIRRORS
> > if available
> > ERROR: Fetcher failure: Unable to find revision
> > 8a9723d7420829a2ba0141a9f7d8dc8cd11d8331 in branch master even from
> > upstream
> > ERROR: Function failed: Fetcher failure for URL:
> > 'git://qt.gitorious.org/qt/qt3d.git;branch=master [8]'. Unable to
> > fetch
> > URL from any source.
> > ERROR: Logfile of failure stored in:
> >
> >
> > /home/lachlan/poky-1.7/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/qt3d/5.3.99+5.4.0-beta1+gitAUTOINC+8a9723d742-r0/temp/log.do_fetch.29304
> > ERROR: Task 1993
> > (/home/lachlan/poky-1.7/meta-qt5/recipes-qt/qt5/qt3d_git.bb,
> > do_fetch) failed with exit code '1'
> > WARNING: Failed to fetch URL
> >
> > http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtmultimedia-opensource-src-5.3.2.tar.xz
> > [9],
> > attempting MIRRORS if available
> > ERROR: Fetcher failure: Fetch command failed with exit code 4, no
> > output
> > ERROR: Function failed: Fetcher failure for URL:
> >
> > '
> > http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtmultimedia-opensource-src-5.3.2.tar.xz
> > [10]'.
> > Unable to fetch URL from any source.
> > ERROR: Logfile of failure stored in:
> >
> >
> > /home/lachlan/poky-1.7/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/qtmultimedia/5.3.2-r0/temp/log.do_fetch.7762
> > ERROR: Task 535
> >
> > (/home/lachlan/poky-1.7/meta-qt5/recipes-qt/qt5/qtmultimedia_5.3.2.bb,
> > do_fetch) failed with exit code '1'
> > WARNING: Failed to fetch URL
> > http://www.apache.org/dist/subversion/subversion-1.8.9.tar.bz2 [11],
> > attempting MIRRORS if available
> > WARNING: Failed to fetch URL
> >
> > http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtwebkit-opensource-src-5.3.2.tar.xz
> > [12],
> > attempting MIRRORS if available
> > ERROR: Fetcher failure: Fetch command failed with exit code 4, no
> > output
> > ERROR: Function failed: Fetcher failure for URL:
> >
> > '
> > http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtwebkit-opensource-src-5.3.2.tar.xz
> > [13]'.
> > Unable to fetch URL from any source.
> > ERROR: Logfile of failure stored in:
> >
> >
> > /home/lachlan/poky-1.7/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/qtwebkit/5.3.2-r0/temp/log.do_fetch.19587
> > ERROR: Task 675
> > (/home/lachlan/poky-1.7/meta-qt5/recipes-qt/qt5/qtwebkit_5.3.2.bb,
> > do_fetch) failed with exit code '1'
> > NOTE: validating kernel config, see log.do_kernel_configcheck for
> > details
> >
> > If I manually download the one of the files, e.g.? :
> >
> > '
> > http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtwebkit-opensource-src-5.3.2.tar.xz
> > [14]
> > This works fine.
> >
> > Can anyone suggest what I can look fro to determine the problem. I
> > have tried this a number of time over 24 hours and get the exact
> > same
> > failures.
> >
> > Thank you for any suggestions moving forward.
> >
> > Regards
> > Lachlan
> >
> > ---- Message sent via Adam Internet WebMail -
> > http://www.adamcom.au/ [15]
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> > ------------------------------
> >
> > --
> > _______________________________________________
> > yocto mailing list
> > yocto@yoctoproject.org [17]
> > https://lists.yoctoproject.org/listinfo/yocto [18]
> >
> > End of yocto Digest, Vol 52, Issue 86
> > *************************************
> >
> > ---- Message sent via Adam Internet WebMail -
> > http://www.adam.com.au/
> >
> > Links:
> > ------
> > [1]
> >
> > http://download.qt-project.org/official_releases/qt/5.4/5.4.0/submodules/qtbase-opensource-src-5.4.0.tar.xz
> > [2]
> >
> > http://download.qt-project.org/official_releases/qt/5.4/5.4.0/submodules/qtbase-opensource-src-5.4.0.tarxz
> > [3]
> >
> > http://download.qt-project.org/official_releases/qt/5.4/5.4.0/submodules/qtbase-opensource-src-5.4.0.tar.xz
> > [4] mailto:peterengcomau001@adam.com.au
> > [5] mailto:yocto@yoctoproject.org
> > [6]
> > mailto:f902a9d11fd7326c8f53a3fadfde295f6231fbcb@webmail.adam.com.au
> > [7] http://qt.gitorious.org/qt/qt3d.git;branch=master
> > [8] http://qt.gitorious.org/qt/qt3d.git;branch=master
> > [9]
> >
> > http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtmultimedia-opensource-src-5.3.2tar.xz
> > [10]
> >
> > http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtmultimedia-opensource-src-5.3.2.tar.xz
> > [11] http://www.apache.org/dist/subversion/subversion-1.8.9.tar.bz2
> > [12]
> >
> > http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtwebkit-opensource-src-5.3.2.tar.xz
> > [13]
> >
> > http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtwebkit-opensource-src-5.3.2.tar.xz
> > [14]
> >
> > http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtwebkit-opensource-src-5.3.2.tar.xz
> > [15] http://www.adam.com.au/
> > [16]
> >
> > http://lists.yoctoproject.org/pipermail/yocto/attachments/20150127/7d948cb1/attachment.html
> > [17] mailto:yocto@yoctoproject.org
> > [18] https://lists.yoctoproject.org/listinfo/yocto
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > http://lists.yoctoproject.org/pipermail/yocto/attachments/20150129/b8546355/attachment.html
> > >
> >
> > ------------------------------
> >
> > --
> > _______________________________________________
> > yocto mailing list
> > yocto@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
> >
> >
> > End of yocto Digest, Vol 52, Issue 111
> > **************************************
> >
--
Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 188 bytes --]
next prev parent reply other threads:[~2015-01-28 19:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-28 18:31 meta-qt5 problem in yocto 1.7 Simon Bolek
2015-01-28 19:54 ` Martin Jansa [this message]
2015-01-31 12:30 ` peterengcomau001
2015-01-31 16:25 ` Alex J Lennon
2015-01-31 18:10 ` peterengcomau001
2015-02-01 13:52 ` Alex J Lennon
2015-02-01 17:10 ` Alex J Lennon
2015-02-01 17:55 ` Simon Bolek
2015-02-01 19:31 ` Alex J Lennon
2015-02-01 19:38 ` peterengcomau001
2015-02-01 19:58 ` Alex J Lennon
2015-02-02 3:27 ` peterengcomau001
2015-02-02 11:32 ` Alex J Lennon
-- strict thread matches above, loose matches on Subject: below --
2015-01-28 9:56 Simon Bolek
2015-01-28 17:37 ` peterengcomau001
2015-01-26 15:02 peterengcomau001
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150128195412.GJ2477@jama \
--to=martin.jansa@gmail.com \
--cc=peterengcomau001@adam.com.au \
--cc=simon.bolek@googlemail.com \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.