From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Linux 3.14.31
Date: Thu, 29 Jan 2015 17:54:05 -0800 [thread overview]
Message-ID: <20150130015405.GA18226@kroah.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 16242 bytes --]
I'm announcing the release of the 3.14.31 kernel.
All users of the 3.14 kernel series must upgrade.
The updated 3.14.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-3.14.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 2
arch/arc/include/asm/barrier.h | 37 ---
arch/arc/kernel/ctx_sw_asm.S | 2
arch/arm/boot/dts/imx25.dtsi | 8
arch/arm/crypto/aes_glue.c | 4
arch/arm/crypto/sha1_glue.c | 2
arch/powerpc/crypto/sha1.c | 3
arch/s390/crypto/aes_s390.c | 2
arch/s390/crypto/des_s390.c | 4
arch/s390/crypto/ghash_s390.c | 2
arch/s390/crypto/sha1_s390.c | 2
arch/s390/crypto/sha256_s390.c | 4
arch/s390/crypto/sha512_s390.c | 4
arch/sparc/crypto/aes_glue.c | 2
arch/sparc/crypto/camellia_glue.c | 2
arch/sparc/crypto/crc32c_glue.c | 2
arch/sparc/crypto/des_glue.c | 2
arch/sparc/crypto/md5_glue.c | 2
arch/sparc/crypto/sha1_glue.c | 2
arch/sparc/crypto/sha256_glue.c | 4
arch/sparc/crypto/sha512_glue.c | 4
arch/tile/mm/homecache.c | 2
arch/x86/Kconfig | 6
arch/x86/boot/compressed/misc.c | 9
arch/x86/crypto/aes_glue.c | 4
arch/x86/crypto/aesni-intel_glue.c | 2
arch/x86/crypto/blowfish_glue.c | 4
arch/x86/crypto/camellia_aesni_avx2_glue.c | 4
arch/x86/crypto/camellia_aesni_avx_glue.c | 4
arch/x86/crypto/camellia_glue.c | 4
arch/x86/crypto/cast5_avx_glue.c | 2
arch/x86/crypto/cast6_avx_glue.c | 2
arch/x86/crypto/crc32-pclmul_glue.c | 4
arch/x86/crypto/crc32c-intel_glue.c | 4
arch/x86/crypto/crct10dif-pclmul_glue.c | 4
arch/x86/crypto/fpu.c | 3
arch/x86/crypto/ghash-clmulni-intel_glue.c | 2
arch/x86/crypto/salsa20_glue.c | 4
arch/x86/crypto/serpent_avx2_glue.c | 4
arch/x86/crypto/serpent_avx_glue.c | 2
arch/x86/crypto/serpent_sse2_glue.c | 2
arch/x86/crypto/sha1_ssse3_glue.c | 2
arch/x86/crypto/sha256_ssse3_glue.c | 4
arch/x86/crypto/sha512_ssse3_glue.c | 4
arch/x86/crypto/twofish_avx_glue.c | 2
arch/x86/crypto/twofish_glue.c | 4
arch/x86/crypto/twofish_glue_3way.c | 4
arch/x86/include/asm/desc.h | 20 +
arch/x86/kernel/cpu/mshyperv.c | 1
arch/x86/kernel/tls.c | 25 ++
arch/x86/kernel/traps.c | 4
arch/x86/kernel/tsc.c | 2
crypto/842.c | 1
crypto/aes_generic.c | 3
crypto/algapi.c | 4
crypto/ansi_cprng.c | 3
crypto/anubis.c | 1
crypto/api.c | 4
crypto/arc4.c | 1
crypto/authenc.c | 1
crypto/authencesn.c | 1
crypto/blowfish_generic.c | 3
crypto/camellia_generic.c | 3
crypto/cast5_generic.c | 3
crypto/cast6_generic.c | 3
crypto/cbc.c | 1
crypto/ccm.c | 5
crypto/chainiv.c | 1
crypto/cmac.c | 1
crypto/crc32.c | 1
crypto/crct10dif_generic.c | 3
crypto/cryptd.c | 1
crypto/crypto_null.c | 6
crypto/ctr.c | 3
crypto/cts.c | 1
crypto/deflate.c | 2
crypto/des_generic.c | 7
crypto/ecb.c | 1
crypto/eseqiv.c | 1
crypto/fcrypt.c | 1
crypto/gcm.c | 7
crypto/ghash-generic.c | 3
crypto/hmac.c | 1
crypto/khazad.c | 1
crypto/krng.c | 3
crypto/lrw.c | 1
crypto/lz4.c | 1
crypto/lz4hc.c | 1
crypto/lzo.c | 1
crypto/md4.c | 2
crypto/md5.c | 1
crypto/michael_mic.c | 1
crypto/pcbc.c | 1
crypto/pcrypt.c | 1
crypto/rmd128.c | 1
crypto/rmd160.c | 1
crypto/rmd256.c | 1
crypto/rmd320.c | 1
crypto/salsa20_generic.c | 3
crypto/seed.c | 1
crypto/seqiv.c | 1
crypto/serpent_generic.c | 5
crypto/sha1_generic.c | 3
crypto/sha256_generic.c | 6
crypto/sha512_generic.c | 6
crypto/tea.c | 5
crypto/tgr192.c | 5
crypto/twofish_generic.c | 3
crypto/vmac.c | 1
crypto/wp512.c | 5
crypto/xcbc.c | 1
crypto/xts.c | 1
crypto/zlib.c | 1
drivers/ata/libata-sff.c | 12 +
drivers/ata/sata_dwc_460ex.c | 26 +-
drivers/block/drbd/drbd_req.c | 1
drivers/bus/mvebu-mbus.c | 13 +
drivers/clocksource/exynos_mct.c | 4
drivers/crypto/padlock-aes.c | 2
drivers/crypto/padlock-sha.c | 8
drivers/crypto/ux500/cryp/cryp_core.c | 4
drivers/crypto/ux500/hash/hash_core.c | 8
drivers/gpio/gpiolib.c | 46 +---
drivers/gpu/drm/i915/i915_gem.c | 2
drivers/gpu/drm/radeon/radeon_asic.c | 18 +
drivers/gpu/drm/radeon/radeon_pm.c | 33 +++
drivers/gpu/drm/radeon/si_dpm.c | 39 +++
drivers/input/evdev.c | 13 -
drivers/md/dm-cache-metadata.c | 101 ++++++++-
drivers/md/dm-cache-target.c | 89 ++++----
drivers/md/raid5.c | 3
drivers/mmc/host/sdhci.c | 2
drivers/net/can/dev.c | 8
drivers/pci/pci.c | 40 +++
drivers/pci/quirks.c | 14 +
drivers/pinctrl/core.c | 5
drivers/s390/crypto/ap_bus.c | 3
drivers/scsi/ipr.c | 92 ++++++++
drivers/scsi/ipr.h | 1
drivers/tty/n_tty.c | 9
drivers/xen/swiotlb-xen.c | 2
fs/btrfs/extent_io.c | 11 -
fs/btrfs/file.c | 5
fs/buffer.c | 28 +-
fs/cifs/ioctl.c | 21 -
fs/ext4/mballoc.c | 14 -
fs/f2fs/checkpoint.c | 1
fs/f2fs/node.c | 2
fs/fuse/dev.c | 2
fs/fuse/file.c | 2
fs/gfs2/aops.c | 1
fs/gfs2/meta_io.c | 4
fs/ntfs/attrib.c | 1
fs/ntfs/file.c | 1
include/linux/cpuset.h | 29 ++
include/linux/crypto.h | 13 +
include/linux/gfp.h | 4
include/linux/huge_mm.h | 4
include/linux/jump_label.h | 20 +
include/linux/mmzone.h | 228 +++++++++++----------
include/linux/page-flags.h | 2
include/linux/pageblock-flags.h | 33 +--
include/linux/pagemap.h | 108 +++++++++-
include/linux/pci.h | 2
include/linux/swap.h | 22 --
include/linux/time.h | 13 +
include/trace/events/pagemap.h | 16 -
kernel/cpuset.c | 14 -
kernel/time.c | 4
kernel/time/ntp.c | 7
mm/filemap.c | 209 +++++++------------
mm/huge_memory.c | 26 ++
mm/memory.c | 4
mm/page_alloc.c | 313 ++++++++++++++++-------------
mm/shmem.c | 11 -
mm/swap.c | 50 +++-
mm/swap_state.c | 2
mm/vmalloc.c | 6
mm/vmscan.c | 36 ++-
mm/vmstat.c | 9
net/netfilter/ipvs/ip_vs_ftp.c | 10
net/netfilter/nfnetlink.c | 3
scripts/recordmcount.pl | 1
security/keys/gc.c | 4
sound/usb/mixer.c | 1
185 files changed, 1458 insertions(+), 819 deletions(-)
Al Viro (1):
fix deadlock in cifs_ioctl_clone()
Alex Deucher (3):
drm/radeon: add a dpm quirk list
drm/radeon: add si dpm quirk list
drm/radeon: use rv515_ring_start on r5xx
Alex Williamson (2):
PCI: Add flag for devices where we can't use bus reset
PCI: Mark Atheros AR93xx to avoid bus reset
Alexandre Demers (1):
x86/tsc: Change Fast TSC calibration failed from error to info
Andrew Lunn (1):
bus: mvebu-mbus: fix support of MBus window 13
Andy Lutomirski (3):
x86, tls, ldt: Stop checking lm in LDT_empty
x86, tls: Interpret an all-zero struct user_desc as "no segment"
x86/asm/traps: Disable tracing and kprobes in fixup_bad_iret and sync_regs
Andy Shevchenko (1):
sata_dwc_460ex: fix resource leak on error path
Brian King (1):
ipr: wait for aborted command responses
Bryan O'Donoghue (1):
x86/apic: Re-enable PCI_MSI support for non-SMP X86_32
Chris Wilson (1):
drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES
Dan Carpenter (1):
ipvs: uninitialized data with IP_VS_IPV6
David Jeffery (1):
libata: prevent HSM state change race between ISR and PIO
David Rientjes (1):
mm, thp: only collapse hugepages to nodes with affinity for zone_reclaim_mode
David Vrabel (1):
Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
Dmitry Torokhov (1):
Input: evdev - fix EVIOCG{type} ioctl
Fabio Estevam (1):
ARM: dts: imx25: Fix PWM "per" clocks
Francesco Ruggeri (1):
tty: Fix pty master poll() after slave closes v2
Greg Kroah-Hartman (1):
Linux 3.14.31
Hugh Dickins (2):
shmem: fix init_page_accessed use to stop !PageLRU bug
mm/memory.c: use entry = ACCESS_ONCE(*pte) in handle_pte_fault()
Jason Lee Cragg (1):
ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210
Jerome Marchand (2):
mm: make copy_pte_range static again
memcg, vmscan: Fix forced scan of anonymous pages
Jianyu Zhan (1):
mm/swap.c: clean up *lru_cache_add* functions
Jim Lin (1):
pinctrl: Fix two deadlocks
Joe Thornber (2):
dm cache: share cache-metadata object across inactive and active DM tables
dm cache: fix problematic dual use of a single migration count variable
Johan Hovold (2):
gpio: sysfs: fix gpio-chip device-attribute leak
gpio: sysfs: fix gpio device-attribute leak
Joonsoo Kim (1):
vmalloc: use rcu list iterator to reduce vmap_area_lock contention
K. Y. Srinivasan (1):
x86, hyperv: Mark the Hyper-V clocksource as being continuous
Kees Cook (3):
x86, boot: Skip relocs when load address unchanged
crypto: prefix module autoloading with "crypto-"
crypto: include crypto- module prefix in template
Lars Ellenberg (1):
drbd: merge_bvec_fn: properly remap bvm->bi_bdev
Mathias Krause (1):
crypto: add missing crypto module aliases
Mel Gorman (24):
mm: page_alloc: do not update zlc unless the zlc is active
mm: page_alloc: do not treat a zone that cannot be used for dirty pages as "full"
include/linux/jump_label.h: expose the reference count
mm: page_alloc: use jump labels to avoid checking number_of_cpusets
mm: page_alloc: calculate classzone_idx once from the zonelist ref
mm: page_alloc: only check the zone id check if pages are buddies
mm: page_alloc: only check the alloc flags and gfp_mask for dirty once
mm: page_alloc: take the ALLOC_NO_WATERMARK check out of the fast path
mm: page_alloc: use unsigned int for order in more places
mm: page_alloc: reduce number of times page_to_pfn is called
mm: page_alloc: convert hot/cold parameter and immediate callers to bool
mm: page_alloc: lookup pageblock migratetype with IRQs enabled during free
mm: shmem: avoid atomic operation during shmem_getpage_gfp
mm: do not use atomic operations when releasing pages
mm: do not use unnecessary atomic operations when adding pages to the LRU
fs: buffer: do not use unnecessary atomic operations when discarding buffers
mm: non-atomically mark page accessed during page cache allocation where possible
mm: avoid unnecessary atomic operations during end_page_writeback()
mm: pagemap: avoid unnecessary overhead when tracepoints are deactivated
mm: rearrange zone fields into read-only, page alloc, statistics and page reclaim lines
mm: move zone->pages_scanned into a vmstat counter
mm: vmscan: only update per-cpu thresholds for online CPU
mm: page_alloc: abort fair zone allocation policy when remotes nodes are encountered
mm: page_alloc: reduce cost of the fair zone allocation policy
Michael Karcher (1):
scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore
Michal Hocko (1):
mm: get rid of radix tree gfp mask for pagecache_get_page
NeilBrown (1):
md/raid5: fetch_block must fetch all the blocks handle_stripe_dirtying wants.
Oliver Hartkopp (1):
can: dev: fix crtlmode_supported check
Pablo Neira Ayuso (1):
netfilter: nfnetlink: validate nfnetlink header from batch
Sasha Levin (3):
time: settimeofday: Validate the values of tv from user
time: adjtimex: Validate the ADJ_FREQUENCY values
KEYS: close race between key lookup and freeing
Sjoerd Simons (1):
mmc: sdhci: Don't signal the sdio irq if it's not setup
Tobias Jakobi (1):
clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
Vineet Gupta (2):
ARC: Delete stale barrier.h
ARC: Fix build breakage for !CONFIG_ARC_DW2_UNWIND
[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]
next reply other threads:[~2015-01-30 1:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-30 1:54 Greg KH [this message]
2015-01-30 1:54 ` Linux 3.14.31 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150130015405.GA18226@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.