From: "Pali Rohár" <pali.rohar@gmail.com>
To: linux-omap@vger.kernel.org
Cc: Pavel Machek <pavel@ucw.cz>, Sebastian Reichel <sre@kernel.org>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>,
Tony Lindgren <tony@atomide.com>, Felipe Balbi <balbi@ti.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Jarkko Nikula <jarkko.nikula@bitmer.com>
Subject: v3.19: Nokia N900 - auto not working
Date: Sat, 31 Jan 2015 10:35:45 +0100 [thread overview]
Message-ID: <201501311035.45875@pali> (raw)
[-- Attachment #1: Type: Text/Plain, Size: 1125 bytes --]
Hello,
audio on (real) n900 device does not working with 3.19 kernel. Here is relevant dmesg output:
[ 5.687438] omap_i2c 48070000.i2c: bus 1 rev3.3 at 2200 kHz
[ 5.696166] tpa6130a2 2-0060: Write failed
[ 5.696228] tpa6130a2 2-0060: Failed to initialize chip
[ 5.696380] tpa6130a2: probe of 2-0060 failed with error -121
[ 5.697937] omap_i2c 48072000.i2c: bus 2 rev3.3 at 100 kHz
[ 5.700256] omap_i2c 48060000.i2c: bus 3 rev3.3 at 400 kHz
[ 6.289154] rx51-audio n900-audio: Failed to add TPA6130A2 controls
[ 6.295715] rx51-audio n900-audio: ASoC: failed to init TLV320AIC34: -19
[ 6.302459] rx51-audio n900-audio: ASoC: failed to instantiate card -19
[ 6.309173] gpiod_unexport: invalid GPIO
[ 6.315612] rx51-audio n900-audio: snd_soc_register_card failed (-19)
[ 6.397949] ALSA device list:
[ 6.404876] No soundcards found.
Any idea why tpa6130a2 fails to initialize?
I applied also these patches:
https://lkml.org/lkml/2015/1/29/465
http://mailman.alsa-project.org/pipermail/alsa-devel/2015-January/087228.html
--
Pali Rohár
pali.rohar@gmail.com
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next reply other threads:[~2015-01-31 9:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-31 9:35 Pali Rohár [this message]
2015-01-31 10:40 ` v3.19: Nokia N900 - auto not working Jarkko Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201501311035.45875@pali \
--to=pali.rohar@gmail.com \
--cc=aaro.koskinen@iki.fi \
--cc=balbi@ti.com \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=jarkko.nikula@bitmer.com \
--cc=linux-omap@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=peter.ujfalusi@ti.com \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.