From: Denys Dmytriyenko <denys@ti.com>
To: "Cooper Jr., Franklin" <fcooper@ti.com>
Cc: "meta-arago@arago-project.org" <meta-arago@arago-project.org>
Subject: Re: [PATCH] sysvinit: Changing default setting to add HWCLOCKACCESS=no
Date: Thu, 5 Feb 2015 11:52:38 -0500 [thread overview]
Message-ID: <20150205165237.GJ9943@edge> (raw)
In-Reply-To: <8F29D6B095ED194EA1980491A5E029710C7F91C3@DFLE08.ent.ti.com>
This was supposed to be an RFC, by the way...
On Thu, Feb 05, 2015 at 04:45:43PM +0000, Cooper Jr., Franklin wrote:
> I see references to several boards that have enabled rtc in its dts file. I
> didn't check all the boards we support in meta-ti but additional boards may
> use it. So we shouldn't disable it for these boards.
Exactly, so the proposal was to disable it by default and enable through
machine overrides for those boards that have it.
> Honestly if the error is harmless I would say just ignore it.
That was my initial response - the error is harmless, just ignore it. Not good
for OOB experience, I guess :)
> Use some variable that will
> conditional add that string depending on the machine if you want to disable
> it for the machines you care about.
Just use machine overrides directly, no need to invent another variable...
> Honestly creating a file just to cat it's value to another file I feel is a
> bit of an overkill especially since that file isn't generic and is meant for
> hwclock. So just using echoing something would probably be better.
>
> DISABLE_RTC = ""
> DISABLE_<machine> = "yes"
> ....
>
> do_install_append() {
> if [ "${DISABLE_RTC}" = "yes" ]
> then
> echo "#This is to indicate hwclock is not supported" >> ${D}${sysconfdir}/default/rcS
> echo "HWCLOCKACCESS=no"
> fi
> }
>
>
> > -----Original Message-----
> > From: meta-arago-bounces@arago-project.org [mailto:meta-arago-
> > bounces@arago-project.org] On Behalf Of Nelson, Sam
> > Sent: Thursday, February 05, 2015 10:16 AM
> > To: meta-arago@arago-project.org
> > Subject: [meta-arago] [PATCH] sysvinit: Changing default setting to add
> > HWCLOCKACCESS=no
> >
> > - realtime clock is not commonly present and hence adding
> > HWCLOCKACCESS=no
> > - Avoids error message if rc device not present
> >
> > Signed-off-by: Sam Nelson <sam.nelson@ti.com>
> > ---
> > .../recipes-core/sysvinit/files/hwclock.rcS | 2 ++
> > .../sysvinit/sysvinit_2.88dsf.bbappend | 9 +++++++++
> > 2 files changed, 11 insertions(+)
> > create mode 100644 meta-arago-distro/recipes-core/sysvinit/files/hwclock.rcS
> > create mode 100644 meta-arago-distro/recipes-
> > core/sysvinit/sysvinit_2.88dsf.bbappend
> >
> > diff --git a/meta-arago-distro/recipes-core/sysvinit/files/hwclock.rcS b/meta-
> > arago-distro/recipes-core/sysvinit/files/hwclock.rcS
> > new file mode 100644
> > index 0000000..3e26c20
> > --- /dev/null
> > +++ b/meta-arago-distro/recipes-core/sysvinit/files/hwclock.rcS
> > @@ -0,0 +1,2 @@
> > +# This is to indicate hwclock is not supported HWCLOCKACCESS=no
> > diff --git a/meta-arago-distro/recipes-core/sysvinit/sysvinit_2.88dsf.bbappend
> > b/meta-arago-distro/recipes-core/sysvinit/sysvinit_2.88dsf.bbappend
> > new file mode 100644
> > index 0000000..6e08c83
> > --- /dev/null
> > +++ b/meta-arago-distro/recipes-core/sysvinit/sysvinit_2.88dsf.bbappend
> > @@ -0,0 +1,9 @@
> > +PR_append = "-arago0"
> > +
> > +# look for files in this layer first
> > +FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
> > +SRC_URI += "file://hwclock.rcS"
> > +do_install_append () {
> > +# Add hwclock configuration
> > + cat ${WORKDIR}/hwclock.rcS >> ${D}${sysconfdir}/default/rcS }
> > --
> > 1.7.9.5
> >
> > _______________________________________________
> > meta-arago mailing list
> > meta-arago@arago-project.org
> > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
next prev parent reply other threads:[~2015-02-05 16:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-05 16:15 [PATCH] sysvinit: Changing default setting to add HWCLOCKACCESS=no Sam Nelson
2015-02-05 16:45 ` Cooper Jr., Franklin
2015-02-05 16:52 ` Denys Dmytriyenko [this message]
2015-02-05 17:08 ` Cooper Jr., Franklin
2015-02-05 17:14 ` Denys Dmytriyenko
2015-02-05 17:19 ` Cooper Jr., Franklin
2015-02-05 17:49 ` Denys Dmytriyenko
2015-02-05 18:14 ` Denys Dmytriyenko
2015-02-05 17:05 ` Denys Dmytriyenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150205165237.GJ9943@edge \
--to=denys@ti.com \
--cc=fcooper@ti.com \
--cc=meta-arago@arago-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.