Re: Passing kernel arguments - SAMA5D4EK

[Sascha Hauer <s.hauer@pengutronix.de>]

On Sat, Feb 07, 2015 at 11:55:12AM -0700, Doug Brainard wrote:
> Sascha,
> 
> I've begun working on upgrading to the new environment, but I've
> gotten stuck as far as getting Linux to boot.  I've attached the
> device list from the old environment and the new one that I'm
> currently working on.  I believe they are the same.  My globals are
> currently set up as:
> 
>   version: 2015.02.0-00003-ga17b7cd-dirty
>   model: Atmel sama5d4ek
> * hostname: sama5d4ek
>   loglevel: 7
>   console.input_allow: 1
>   bootm.image:
>   bootm.image.loadaddr:
>   bootm.oftree:
>   bootm.initrd:
>   bootm.initrd.loadaddr:
>   dhcp.rootpath:
>   dhcp.tftp_server_name:
>   dhcp.bootfile:
>   dhcp.oftree_file:
>   dhcp.vendor_id:
>   dhcp.client_id:
>   dhcp.user_class:
>   dhcp.client_uuid:
> * autoboot_timeout: 3
> * allow_color: true
> * user: none
> * boot.default: nand-ubi
> * bootargs.base: console=ttyS0,115200
>   linux.bootargs.base:
>   linux.bootargs.console:
>   linux.bootargs.dyn.ip:
>   linux.bootargs.dyn.root:
>   editcmd: sedit
>   linux.mtdparts.nand0:
> atmel_nand:256k(nand0.at91bootstrap),512k(nand0.barebox)ro,256k(nand0.bareboxenv),256k(nand0.bareboxenv2),256k(nand0.spare),512k(nand0.oftree),6M(nand0.kernel),-(nand0.rootfs)
> 
> With these settings, it says that it loads the kernel and is booting,
> but then just sits there indefinitely.  Any ideas?  Below is the boot
> information I get:
> 
> barebox 2015.02.0-00003-ga17b7cd-dirty #24 Sat Feb 7 11:19:26 MST 2015
> 
> 
> Board: Atmel sama5d4ek
> AT91: Detected soc type: sama5d4
> AT91: Detected soc subtype: sama5d44
> Clocks: CPU 528 MHz, master 176 MHz, main 12.000 MHz
> gpio-at91 at91sam9x5-gpio0: AT91 gpio driver registered
> gpio-at91 at91sam9x5-gpio1: AT91 gpio driver registered
> gpio-at91 at91sam9x5-gpio2: AT91 gpio driver registered
> gpio-at91 at91sam9x5-gpio3: AT91 gpio driver registered
> gpio-at91 at91sam9x5-gpio4: AT91 gpio driver registered
> i2c-gpio i2c-gpio0: using pins 30 (SDA) and 31 (SCL)
> atmel_nand: Use On Flash BBT
> nand: ONFI param page 0 valid
> nand: ONFI flash detected
> nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron
> MT29F4G08ABAEAWP), 512MiB, page size: 4096, OOB size: 224
> atmel_nand atmel_nand0: Initialize PMECC params, cap: 8, sector: 512
> Bad block table found at page 131008, version 0x01
> Bad block table found at page 130944, version 0x01
> mdio_bus: miibus0: probed
> macb macb0: Cadence GEM at 0xf8020000
> m25p80 m25p800: at25df321a (4096 Kbytes)
> atmel_mci atmel_mci1: version: 0x600
> atmel_mci atmel_mci1: registered as atmel_mci1
> mci0: no card inserted
> malloc space: 0x26500000 -> 0x26efffff (size 10 MiB)
> envfs: wrong magic
> running /env/bin/init...
> 
> Hit any key to stop autoboot:  0
> booting nand-ubi
> 
> Loading ARM Linux zImage '/dev/nand0.kernel.bb'
> commandline:    root=ubi0:nand0.rootfs ubi.mtd=nand0.rootfs
> rootfstype=ubifs
> mtdparts=atmel_nand:256k(nand0.at91bootstrap),512k(nand0.barebox)ro,256k(nand0.bareboxenv),256k(nand0.bareboxenv2),256k(nand0.spare),512k(nand0.oftree),6M(nand0.kernel),-(nand0.rootfs)
> arch_number: 0

Here is your problem. barebox tries to boot Linux with an old style
machine id which is not set for your board. You'll need a device tree
for your board. If you've built your kernel correctly you'll find it
in arch/arm/boot/dts/at91-sama5d4ek.dtb. Set global.bootm.oftree to the
path to the device tree file and it should boot. See
Documentation/user/networking.rst for a convenient way to get the
devicetree onto the board. You can store it for example under /env/oftree

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox