diff for duplicates of <20150218212044.GD12754@verge.net.au> diff --git a/a/1.txt b/N1/1.txt index 63e571e..a25029c 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -15,7 +15,8 @@ On Tue, Feb 17, 2015 at 04:04:40PM +0100, Geert Uytterhoeven wrote: > - The fourth and fifth patch remove all ape6evm-legacy and > ape6evm-reference support, now the r8a73a4 generic multiplatform case > has the same feature set, -> - The sixth patch is new, and removes the now superfluous console> bootargs parameter. +> - The sixth patch is new, and removes the now superfluous console= +> bootargs parameter. > > Thanks for applying! @@ -29,8 +30,8 @@ disabled) is as follows: Booting Linux on physical CPU 0x0 -Linux version 3.19.0-00014-g507937a (horms@ayumi.isobedori.kobe.vergenet.net) (gcc version 4.6.3 (GCC) ) #725 SMP Thu Feb 19 04:45:03 JST 2015 -CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr\x10c5307d +Linux version 3.19.0-00014-g507937a (horms at ayumi.isobedori.kobe.vergenet.net) (gcc version 4.6.3 (GCC) ) #725 SMP Thu Feb 19 04:45:03 JST 2015 +CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr=10c5307d CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: APE6EVM Ignoring memory block 0x200000000 - 0x240000000 @@ -63,14 +64,14 @@ Virtual kernel memory layout: .bss : 0xc0651460 - 0xc06811bc ( 192 kB) Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. -RCU: Adjusting geometry for rcu_fanout_leaf\x16, nr_cpu_ids=1 +RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS:16 nr_irqs:16 16 Architected cp15 timer(s) running at 13.00MHz (virt). sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 2643056803840ns Switching to timer-based delay loop, resolution 76ns Console: colour dummy device 80x30 console [tty0] enabled -Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj\x130000) +Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) @@ -138,7 +139,7 @@ e6c40000.serial: ttySC0 at MMIO 0xe6c40000 (irq = 139, base_baud = 0) is a scifa console [ttySC0] enabled [drm] Initialized drm 1.1.0 20060810 libphy: smsc911x-mdio: probed -smsc911x 8000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr€00000.ethernet:01, irq=-1) +smsc911x 8000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=8000000.ethernet:01, irq=-1) smsc911x 8000000.ethernet eth0: MAC Address: 00:08:f7:00:02:4b ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver @@ -153,7 +154,7 @@ sh_mobile_sdhi: probe of ee100000.sd failed with error -22 sh_mobile_sdhi ee120000.sd: No vqmmc regulator found sh_mobile_sdhi: probe of ee120000.sd failed with error -22 sh_mmcif ee200000.mmc: No vqmmc regulator found -of_dma_request_slave_channel: dma-names property of node '/mmc@ee200000' missing or empty +of_dma_request_slave_channel: dma-names property of node '/mmc at ee200000' missing or empty sh_mmcif ee200000.mmc: Chip version 0x0003, clock rate 0MHz usbcore: registered new interface driver usbhid usbhid: USB HID core driver diff --git a/a/content_digest b/N1/content_digest index db22425..2c3fb5c 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,7 +1,7 @@ "ref\01424185486-3017-1-git-send-email-geert+renesas@glider.be\0" - "From\0Simon Horman <horms@verge.net.au>\0" - "Subject\0Re: [PATCH v4 0/6] ARM: shmobile: r8a73a4/ape6evm: Complete multiplatform support\0" - "Date\0Wed, 18 Feb 2015 21:20:45 +0000\0" + "From\0horms@verge.net.au (Simon Horman)\0" + "Subject\0[PATCH v4 0/6] ARM: shmobile: r8a73a4/ape6evm: Complete multiplatform support\0" + "Date\0Wed, 18 Feb 2015 16:20:45 -0500\0" "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" @@ -22,7 +22,8 @@ "> - The fourth and fifth patch remove all ape6evm-legacy and\n" "> ape6evm-reference support, now the r8a73a4 generic multiplatform case\n" "> has the same feature set,\n" - "> - The sixth patch is new, and removes the now superfluous console> bootargs parameter.\n" + "> - The sixth patch is new, and removes the now superfluous console=\n" + "> bootargs parameter.\n" "> \n" "> Thanks for applying!\n" "\n" @@ -36,8 +37,8 @@ "\n" "\n" "Booting Linux on physical CPU 0x0\n" - "Linux version 3.19.0-00014-g507937a (horms@ayumi.isobedori.kobe.vergenet.net) (gcc version 4.6.3 (GCC) ) #725 SMP Thu Feb 19 04:45:03 JST 2015\n" - "CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr\020c5307d\n" + "Linux version 3.19.0-00014-g507937a (horms at ayumi.isobedori.kobe.vergenet.net) (gcc version 4.6.3 (GCC) ) #725 SMP Thu Feb 19 04:45:03 JST 2015\n" + "CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr=10c5307d\n" "CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache\n" "Machine model: APE6EVM\n" "Ignoring memory block 0x200000000 - 0x240000000\n" @@ -70,14 +71,14 @@ " .bss : 0xc0651460 - 0xc06811bc ( 192 kB)\n" "Hierarchical RCU implementation.\n" " RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.\n" - "RCU: Adjusting geometry for rcu_fanout_leaf\026, nr_cpu_ids=1\n" + "RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1\n" "NR_IRQS:16 nr_irqs:16 16\n" "Architected cp15 timer(s) running at 13.00MHz (virt).\n" "sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 2643056803840ns\n" "Switching to timer-based delay loop, resolution 76ns\n" "Console: colour dummy device 80x30\n" "console [tty0] enabled\n" - "Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj\0230000)\n" + "Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)\n" "pid_max: default: 32768 minimum: 301\n" "Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)\n" "Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)\n" @@ -145,7 +146,7 @@ "console [ttySC0] enabled\n" "[drm] Initialized drm 1.1.0 20060810\n" "libphy: smsc911x-mdio: probed\n" - "smsc911x 8000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr\342\202\25400000.ethernet:01, irq=-1)\n" + "smsc911x 8000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=8000000.ethernet:01, irq=-1)\n" "smsc911x 8000000.ethernet eth0: MAC Address: 00:08:f7:00:02:4b\n" "ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n" "ehci-pci: EHCI PCI platform driver\n" @@ -160,7 +161,7 @@ "sh_mobile_sdhi ee120000.sd: No vqmmc regulator found\n" "sh_mobile_sdhi: probe of ee120000.sd failed with error -22\n" "sh_mmcif ee200000.mmc: No vqmmc regulator found\n" - "of_dma_request_slave_channel: dma-names property of node '/mmc@ee200000' missing or empty\n" + "of_dma_request_slave_channel: dma-names property of node '/mmc at ee200000' missing or empty\n" "sh_mmcif ee200000.mmc: Chip version 0x0003, clock rate 0MHz\n" "usbcore: registered new interface driver usbhid\n" "usbhid: USB HID core driver\n" @@ -179,4 +180,4 @@ "IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready\n" sh_mmcif ee200000.mmc: Timeout waiting for 1 on CMD0 -94f2bd7046266960fc1d6db515ef086ebe8ace634c52769bb5209a856424869a +e8e70a0ce0479016789376ff2ceff2a0cdf473a51f6253d9d8ab5c2736156c6c
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.