From: Philipp Matthias Hahn <pmhahn@pmhahn.de>
To: wlanfae <wlanfae@realtek.com>,
Larry Finger <Larry.Finger@lwfinger.net>,
linux-wireless@vger.kernel.org
Subject: rtl8192cu: unreliable connection
Date: Fri, 20 Feb 2015 11:07:02 +0100 [thread overview]
Message-ID: <20150220100702.GA7400@pmhahn.de> (raw)
Hello,
I have an rtl8192cu based USB WLAN dongle from D-Link, which works very
unreliable for me.
It is not directly recognized by my 3.18.7 linux kernel and I currently have
> # cat /etc/modprobe.d/wlan-pmhahn.conf
> install rtl8192cu /sbin/modprobe --ignore-install rtl8192cu $CMDLINE_OPTS ; echo "2001 330D" >/sys/bus/usb/drivers/rtl8192cu/new_id
> options rtl8192cu swenc=1
I'm able to transmit some data, but normally after some time
opening new TCP connections (especially SSL/TLS encrypted ones) fail.
Ping on the other hand does not show any significant problems:
> 953 packets transmitted, 950 received, 0% packet loss, time 953130ms
> rtt min/avg/max/mdev = 43.433/75.560/457.843/34.281 ms
dmesg shows this repeating pattern:
> [ 132.185612] rtl8192cu: MAC auto ON okay!
> [ 132.218366] rtl8192cu: Tx queue select: 0x05
> [ 133.583883] wlan0: authenticate with c0:25:06:ac:54:90
> [ 133.599402] wlan0: send auth to c0:25:06:ac:54:90 (try 1/3)
> [ 133.620267] wlan0: authenticated
> [ 133.621021] wlan0: associate with c0:25:06:ac:54:90 (try 1/3)
> [ 133.625534] wlan0: RX AssocResp from c0:25:06:ac:54:90 (capab=0x431 status=0 aid=3)
> [ 133.625559] rtl8192cu:rtl92cu_set_hw_reg():<0-0> switch case not processed
> [ 133.625565] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 133.626745] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 133.626751] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 133.626769] wlan0: associated
> [ 2553.461180] wlan0: deauthenticating from c0:25:06:ac:54:90 by local choice (Reason: 3=DEAUTH_LEAVING)
> [ 2553.461737] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2553.476041] cfg80211: Calling CRDA to update world regulatory domain
> [ 2553.484929] cfg80211: World regulatory domain updated:
> [ 2553.484932] cfg80211: DFS Master region: unset
> [ 2553.484933] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 2553.484935] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2553.484937] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2553.484939] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2553.484942] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
> [ 2553.484944] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
> [ 2553.484946] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
> [ 2553.484948] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2553.484950] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
> [ 2562.569359] wlan0: authenticate with c0:25:06:ac:54:90
> [ 2562.584177] wlan0: send auth to c0:25:06:ac:54:90 (try 1/3)
> [ 2562.593924] wlan0: authenticated
> [ 2562.595018] wlan0: associate with c0:25:06:ac:54:90 (try 1/3)
> [ 2562.623431] wlan0: RX AssocResp from c0:25:06:ac:54:90 (capab=0x431 status=0 aid=3)
> [ 2562.623459] rtl8192cu:rtl92cu_set_hw_reg():<0-0> switch case not processed
> [ 2562.623468] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2562.625029] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2562.625034] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2562.625053] wlan0: associated
> [ 2566.667513] wlan0: deauthenticated from c0:25:06:ac:54:90 (Reason: 2=PREV_AUTH_NOT_VALID)
> [ 2566.672628] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2566.689055] cfg80211: Calling CRDA to update world regulatory domain
> [ 2566.692128] cfg80211: World regulatory domain updated:
> [ 2566.692131] cfg80211: DFS Master region: unset
> [ 2566.692132] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 2566.692135] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2566.692137] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2566.692139] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2566.692141] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
> [ 2566.692143] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
> [ 2566.692145] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
> [ 2566.692147] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2566.692149] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
> [ 2567.566395] wlan0: authenticate with c0:25:06:ac:54:90
> [ 2567.591386] wlan0: send auth to c0:25:06:ac:54:90 (try 1/3)
> [ 2567.629133] wlan0: authenticated
> [ 2567.630070] wlan0: associate with c0:25:06:ac:54:90 (try 1/3)
> [ 2567.660368] wlan0: RX AssocResp from c0:25:06:ac:54:90 (capab=0x431 status=0 aid=3)
> [ 2567.660387] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2567.660404] rtl8192cu:rtl92cu_set_hw_reg():<0-0> switch case not processed
> [ 2567.660406] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2567.661988] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2567.661994] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2567.662024] wlan0: associated
> [ 2572.908712] wlan0: deauthenticated from c0:25:06:ac:54:90 (Reason: 2=PREV_AUTH_NOT_VALID)
> [ 2572.913573] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2572.930075] cfg80211: Calling CRDA to update world regulatory domain
> [ 2572.932805] cfg80211: World regulatory domain updated:
> [ 2572.932807] cfg80211: DFS Master region: unset
> [ 2572.932809] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 2572.932811] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2572.932813] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2572.932815] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2572.932817] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
> [ 2572.932820] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
> [ 2572.932822] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
> [ 2572.932824] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
> [ 2572.932826] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
> [ 2573.807378] wlan0: authenticate with c0:25:06:ac:54:90
> [ 2573.832330] wlan0: send auth to c0:25:06:ac:54:90 (try 1/3)
> [ 2573.835813] wlan0: authenticated
> [ 2573.836045] wlan0: associate with c0:25:06:ac:54:90 (try 1/3)
> [ 2573.862830] wlan0: RX AssocResp from c0:25:06:ac:54:90 (capab=0x431 status=0 aid=3)
> [ 2573.862857] rtl8192cu:rtl92cu_set_hw_reg():<0-0> switch case not processed
> [ 2573.862865] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2573.863933] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2573.863938] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
> [ 2573.863955] wlan0: associated
# lsusb -s 1:13 -v
> Bus 001 Device 013: ID 2001:330d D-Link Corp.
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x2001 D-Link Corp.
> idProduct 0x330d
> bcdDevice 2.00
> iManufacturer 1 Realtek
> iProduct 2 802.11n WLAN Adapter
> iSerial 3 00e04c000001
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 46
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 4
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 1
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
Any helpful ideas?
Thanks in advance.
Philipp
--
/ / (_)__ __ ____ __ Philipp Hahn
/ /__/ / _ \/ // /\ \/ /
/____/_/_//_/\_,_/ /_/\_\ pmhahn@pmhahn.de
reply other threads:[~2015-02-20 10:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150220100702.GA7400@pmhahn.de \
--to=pmhahn@pmhahn.de \
--cc=Larry.Finger@lwfinger.net \
--cc=linux-wireless@vger.kernel.org \
--cc=wlanfae@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.