From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements
Date: Thu, 26 Feb 2015 18:14:25 +0200 [thread overview]
Message-ID: <20150226181425.691fb31f@i7> (raw)
In-Reply-To: <CAGo_u6pNfSFxar42N0jeL6uM_=Ea-83UU_vLWE3BLq-nrJX8vQ@mail.gmail.com>
On Thu, 26 Feb 2015 08:50:09 -0600
Nishanth Menon <nm@ti.com> wrote:
> On Thu, Feb 26, 2015 at 1:40 AM, Siarhei Siamashka
> <siarhei.siamashka@gmail.com> wrote:
> > On Wed, 25 Feb 2015 14:55:08 -0600
> > Nishanth Menon <nm@ti.com> wrote:
> >
> >> Hi,
> >>
> >> The third incarnation of this series to address various ideas of
> >> previous V2 series. I will skip the full blurb and point to V1/V2
> >> links for the usual blurb.
> >>
> >> Changes since V2:
> >> - Added documentation revisioning info with ARM erratums
> >> - patch series are split up to address ARM erratums first followed by TI
> >> OMAP conversion
> >> - More OMAP3 now get erratum implementation - had to redo rx51 a little
> >> - I think is better helps exynos: https://patchwork.ozlabs.org/patch/443271/
> >> https://patchwork.ozlabs.org/patch/441863/
> >> - Rearranged the series to address generic ARM first followed by rest.
> >>
> >> V2: http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/213060
> >> V1: http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/212174
> >>
> >> Nishanth Menon (10):
> >> ARM: Introduce erratum workaround for 798870
> >> ARM: Introduce erratum workaround for 454179
> >> ARM: Introduce erratum workaround for 430973
> >> ARM: Introduce erratum workaround for 621766
> >> ARM: OMAP: Change set_pl310_ctrl_reg to be generic
> >> ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs
> >> ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with
> >> omap_smc1
> >> ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended
> >> configuration
> >> ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
> >> ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973,
> >> 621766
> >>
> >> Praveen Rao (1):
> >> ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870
> >
> > Could you perhaps also pick up a workaround for "725233: PLD
> > instructions executed with PLD data forwarding enabled can result
> > in a processor deadlock" for old OMAP3 (r1pX revision of Cortex-A8)?
> >
> > http://git.denx.de/?p=u-boot.git;a=commitdiff;h=041d42e789aba20296ffcde92173f100a9592880
> >
> > This used to be in U-Boot earlier, but seems to have vanished from the
> > current U-Boot code. I would probably submit a patch myself, but I
> > don't have such hardware anymore to test it.
>
> Could I have a review by - I think I screwed up r1-r3 handling in
> start.S when multiple erratas are enabled - which by some luck, I
> have'nt hit.. I should probably fix that.
Sadly, I don't have this old hardware anymore. I have lent my first
generation beagleboard to another person several years ago and have no
idea where it is now. Maybe I should try to get it back one day :)
But taking the "formal" route, I checked who is the current beagleboard
maintainer and looks like that's Tom Rini, who is already quite
conveniently in the CC ;-)
Basically, this old hardware is either maintained or not. If it is
maintained, then probably the board maintainer is the best person to
review and test the errata patches.
> I will hold off adding more erratas or changes for now and look for
> the current series getting in.. in fact, I am tempted to remove omap3
> entirely from this list for now, given the multiple platforms impacted
> and unless folks are willing to help test those, I am more than happy
> to just focus on a15 erratum in the first series which benefits my
> immediate needs and potentially helping exynos as well.
--
Best regards,
Siarhei Siamashka
next prev parent reply other threads:[~2015-02-26 16:14 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-25 20:55 [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 01/11] ARM: Introduce erratum workaround for 798870 Nishanth Menon
2015-03-03 16:29 ` Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 02/11] ARM: Introduce erratum workaround for 454179 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 03/11] ARM: Introduce erratum workaround for 430973 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 04/11] ARM: Introduce erratum workaround for 621766 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 05/11] ARM: OMAP: Change set_pl310_ctrl_reg to be generic Nishanth Menon
2015-03-03 17:08 ` Tom Rini
2015-03-03 17:12 ` Nishanth Menon
2015-03-03 17:54 ` Nishanth Menon
2015-03-03 17:55 ` Tom Rini
2015-02-25 20:55 ` [U-Boot] [PATCH V3 06/11] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 07/11] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 08/11] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 09/11] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 10/11] ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 11/11] ARM: OMAP3: rx51: " Nishanth Menon
2015-02-26 7:40 ` [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Siarhei Siamashka
2015-02-26 14:50 ` Nishanth Menon
2015-02-26 16:14 ` Siarhei Siamashka [this message]
2015-03-02 21:16 ` Tom Rini
2015-03-03 6:45 ` Siarhei Siamashka
2015-03-03 16:25 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150226181425.691fb31f@i7 \
--to=siarhei.siamashka@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.