From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Subject: Re: [Qemu-devel] [PULL v3 00/26] pci, pc, virtio fixes and cleanups
Date: Mon, 2 Mar 2015 15:32:29 +0100 [thread overview]
Message-ID: <20150302143229.GA4400@redhat.com> (raw)
In-Reply-To: <1425293287-4426-1-git-send-email-mst@redhat.com>
Igor noticed a problem on hosts without iasl.
I will redo this later.
On Mon, Mar 02, 2015 at 11:58:09AM +0100, Michael S. Tsirkin wrote:
> Hello, Peter!
>
> This should be the last big pull as we are entering hard freeze.
>
> This is an update of my previous pull request from
> http://mid.gmane.org/20150226165911.GA20287@redhat.com
> git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/for_upstream_rebased
> as the tree was not rebased since, you can either do both pulls or
> only this latest pull, result will be exactly the same.
>
> Note: I only included here the extra 26 patches, on top of what was previously posted
> http://mid.gmane.org/1424295164-4774-1-git-send-email-mst@redhat.com
> if you merge PULL v2 first, you will see just these 26 patches.
>
> I hope all this helps reduce the amount of noise rather
> than increase it.
>
> Note: these patches remove some generated files that we previously
> compiled. Our build system doesn't handle this well for incremental
> builds, resulting in build errors. This is not new, incremental
> builds aren't 100% reliable. You can find and remove the
> stale .d files from the removed sources, this will fix it -
> for example, if you get an error about a missing ssdt-misc.dsl,
> find and remove ssdt-misc.d in output directory.
>
> The following changes since commit 11d39a131020cc5c54ff9bc86d3259f7d32bf849:
>
> Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150218' into staging (2015-02-26 09:08:54 +0000)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/for_upstream
>
> for you to fetch changes up to e32dccddb0b1fa335bf251c155e907f9d47accfd:
>
> acpi-test-data: update after pci rewrite (2015-03-01 19:41:50 +0100)
>
> ----------------------------------------------------------------
> pci, pc, virtio fixes and cleanups
>
> Last pull for hard freeze.
>
> A bunch of fixes all over the place.
> All of ACPI refactoring has been merged.
> Legacy pci commands have been dropped.
>
> Additionally, this includes patches from soft-freeze
> (which apparently haven't been merged yet):
>
> a bunch of fixes all over the place
> virtio header cleanup
> initial patches from virtio-1.0 branch
>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>
> ----------------------------------------------------------------
> Cornelia Huck (3):
> virtio: cull virtio_bus_set_vdev_features
> virtio: feature bit manipulation helpers
> virtio: add feature checking helpers
>
> Denis V. Lunev (1):
> balloon: call qdev_alias_all_properties for proxy dev in balloon class init
>
> Igor Mammedov (59):
> acpi: move generic aml building helpers into dedictated file
> acpi: add build_append_namestring() helper
> acpi: drop min-bytes in build_package()
> pc: acpi-build: update linker on guest access
> pc: acpi-build: migrate RSDP table
> pc: acpi: use local var for accessing ACPI tables blob in acpi_build()
> acpi: introduce AML composer aml_append()
> acpi: add aml_scope() term
> pc: acpi-build: use aml_scope() for \_SB scope
> acpi: add aml_device() term
> acpi: add aml_method() term
> acpi: add aml_if() term
> acpi: add aml_name() & aml_name_decl() term
> acpi: add aml_int() term
> acpi: add aml_return() term
> acpi: add aml_arg() term
> acpi: add aml_store() term
> acpi: add aml_and() term
> acpi: add aml_notify() term
> acpi: add aml_call1(), aml_call2(), aml_call3(), aml_call4() helpers
> acpi: add aml_package() term
> pc: acpi-build: generate _S[345] packages dynamically
> acpi: add aml_buffer() term
> acpi: add aml_resource_template() helper
> acpi: add aml_io() helper
> acpi: include PkgLength size only when requested
> acpi: add aml_operation_region() term
> acpi: add aml_field() & aml_named_field() terms
> acpi: add aml_local() term
> acpi: add aml_string() term
> pc: acpi-build: generate pvpanic device description dynamically
> acpi: add aml_varpackage() term
> acpi: add aml_equal() term
> acpi: add aml_processor() term
> acpi: add aml_eisaid() term
> pc: acpi-build: drop template patching and CPU hotplug objects dynamically
> pc: acpi-build: create CPU hotplug IO region dynamically
> acpi: add aml_reserved_field() term
> pc: acpi-build: drop template patching and memory hotplug objects dynamically
> pc: acpi-build: create memory hotplug IO region dynamically
> acpi: add aml_word_bus_number(), aml_word_io(), aml_dword_memory(), aml_qword_memory() terms
> pc: pcihp: expose MMIO base and len as properties
> pc: acpi-build: reserve PCIHP MMIO resources
> pc: acpi-build: create PCI0._CRS dynamically
> pc: acpi: drop manual hole punching for PCI hotplug resources
> pc: acpi: drop manual hole punching for CPU hotplug resources
> pc: acpi: drop manual hole punching for GPE0 resources
> pc: acpi-build: drop remaining ssdt_misc template
> acpi: add acpi_irq_no_flags() term
> pc: export applesmc IO port/len
> pc: acpi-build: drop template patching and create Device(SMC) dynamically
> tests: ACPI test blobs update due to PCI0._CRS changes
> tests: bios-tables-test: add support for testing bridges
> tests: add ACPI blobs for qemu with bridge cases
> pc: acpi-build: simplify PCI bus tree generation
> tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
> pc: acpi-build: drop template patching and create PCI bus tree dynamically
> pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
> acpi: make build_*() routines static to aml-build.c
>
> Markus Armbruster (13):
> pci: Convert core to realize
> pci: Permit incremental conversion of device models to realize
> pci: Trivial device model conversions to realize
> pcnet: pcnet_common_init() always returns 0, change to void
> pcnet: Convert to realize
> serial-pci: Convert to realize
> ide/ich: Convert to realize
> cirrus-vga: Convert to realize
> qxl: Convert to realize
> pci-assign: Convert to realize
> qdev: Don't exit when running into bad -global
> pci: Give a few helpers internal linkage
> pci-hotplug-old: Has been dead for five major releases, bury
>
> Michael S. Tsirkin (33):
> acpi-build: fix memory leak with bridge hp off
> bios linker: validate pointer within table
> acpi: update RSDP on guest access
> exec: round up size on MR resize
> acpi-build: fix ACPI RAM management
> acpi: has_immutable_rsdp->!rsdp_in_ram
> acpi-build: simplify rsdp management for legacy
> scripts/update-linux-headers.sh: pull virtio hdrs
> include: import virtio headers from linux 4.0
> virtio: use standard virtio_ring.h
> virtio: use standard-headers
> virtio-balloon: use standard headers
> virtio-9p: use standard headers
> virtio-blk: switch to standard-headers
> virtio-net,tap: use standard-headers
> virtio-rng: use standard-headers
> virtio-scsi: use standard-headers
> virtio-serial: switch to standard-headers
> update-linux-headers: use standard-headers
> linux-headers: use standard-headers
> virtio-pci: use standard headers
> scripts: add arch specific standard-headers
> standard-headers: add s390 virtio headers
> s390: use standard headers
> acpi-build: skip hotplugged bridges
> update-linux-headers.sh: s/__inline__/inline/
> virtio-serial-bus.c: drop virtio_ids.h
> standard-headers: include stdint.h
> virtio_ring.h: s/__inline__/inline/
> acpi: update generated hex files
> acpi: drop unused generated files
> acpi-test: update expected files
> acpi-test-data: update after pci rewrite
>
> Peter Krempa (2):
> vl.c: Fix error messages when parsing maxmem parameters
> pc: memory: Validate alignment of maxram_size to page size
>
> Stefan Berger (5):
> tpm: Extend sts register to 32 bit
> tpm: Allow 32 & 16 bit accesses to the registers
> tpm: Support for XFIFO register
> tpm: Support for TIS selftest done flag
> tpm: Support for capability flags of TIS 1.3
>
> Tang Chen (6):
> acpi, pc: Add hotunplug request cb for pc machine.
> acpi, ich9: Add hotunplug request cb for ich9.
> acpi, pc: Add unplug cb for pc machine.
> acpi, ich9: Add unplug cb for ich9.
> acpi, piix4: Add unplug cb for piix4.
> acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
>
> hw/9pfs/virtio-9p.h | 18 +-
> hw/net/pcnet.h | 2 +-
> hw/s390x/s390-virtio-bus.h | 36 +-
> hw/s390x/s390-virtio.h | 7 +-
> hw/tpm/tpm_int.h | 1 +
> hw/tpm/tpm_tis.h | 2 +-
> include/hw/acpi/aml-build.h | 191 ++++
> include/hw/acpi/ich9.h | 4 +
> include/hw/acpi/pc-hotplug.h | 1 +
> include/hw/acpi/pcihp.h | 7 +-
> include/hw/i386/pc.h | 1 +
> include/hw/isa/isa.h | 11 +-
> include/hw/pci/pci.h | 10 +-
> include/hw/qdev-properties.h | 4 +-
> include/hw/virtio/dataplane/vring-accessors.h | 2 +-
> include/hw/virtio/dataplane/vring.h | 2 +-
> include/hw/virtio/virtio-balloon.h | 35 +-
> include/hw/virtio/virtio-blk.h | 77 +-
> include/hw/virtio/virtio-bus.h | 3 -
> include/hw/virtio/virtio-net.h | 151 +--
> include/hw/virtio/virtio-rng.h | 4 +-
> include/hw/virtio/virtio-scsi.h | 120 +-
> include/hw/virtio/virtio-serial.h | 40 +-
> include/hw/virtio/virtio.h | 71 +-
> include/net/tap.h | 24 +-
> include/standard-headers/asm-s390/kvm_virtio.h | 64 ++
> include/standard-headers/asm-s390/virtio-ccw.h | 21 +
> include/standard-headers/linux/if_ether.h | 1 +
> include/standard-headers/linux/types.h | 2 +
> include/standard-headers/linux/virtio_9p.h | 44 +
> include/standard-headers/linux/virtio_balloon.h | 59 +
> include/standard-headers/linux/virtio_blk.h | 143 +++
> include/standard-headers/linux/virtio_config.h | 64 ++
> include/standard-headers/linux/virtio_console.h | 78 ++
> include/standard-headers/linux/virtio_ids.h | 43 +
> include/standard-headers/linux/virtio_net.h | 233 ++++
> include/standard-headers/linux/virtio_pci.h | 193 ++++
> .../linux}/virtio_ring.h | 132 +--
> include/standard-headers/linux/virtio_rng.h | 8 +
> include/standard-headers/linux/virtio_scsi.h | 164 +++
> include/standard-headers/linux/virtio_types.h | 46 +
> include/sysemu/blockdev.h | 2 -
> include/sysemu/sysemu.h | 5 -
> include/sysemu/tpm_backend.h | 2 +-
> linux-headers/linux/virtio_config.h | 58 +-
> linux-headers/linux/virtio_ring.h | 164 +--
> device-hotplug.c | 7 +-
> exec.c | 2 +
> hw/9pfs/virtio-9p-device.c | 2 +-
> hw/acpi/aml-build.c | 888 +++++++++++++++
> hw/acpi/bios-linker-loader.c | 4 +-
> hw/acpi/ich9.c | 14 +
> hw/acpi/memory_hotplug.c | 3 +-
> hw/acpi/pcihp.c | 18 +-
> hw/acpi/piix4.c | 15 +-
> hw/audio/ac97.c | 5 +-
> hw/audio/es1370.c | 5 +-
> hw/audio/intel-hda.c | 6 +-
> hw/block/virtio-blk.c | 31 +-
> hw/char/serial-pci.c | 22 +-
> hw/char/virtio-serial-bus.c | 4 +-
> hw/core/qdev-properties.c | 21 +-
> hw/core/qdev.c | 8 +-
> hw/display/cirrus_vga.c | 11 +-
> hw/display/qxl.c | 36 +-
> hw/display/vga-pci.c | 11 +-
> hw/display/vmware_vga.c | 6 +-
> hw/i2c/smbus_ich9.c | 5 +-
> hw/i386/acpi-build.c | 1179 +++++++++-----------
> hw/i386/kvm/pci-assign.c | 10 +-
> hw/i386/pc.c | 23 +
> hw/i386/pc_piix.c | 3 +
> hw/i386/pc_q35.c | 3 +
> hw/ide/cmd646.c | 5 +-
> hw/ide/ich.c | 13 +-
> hw/ide/piix.c | 10 +-
> hw/ide/via.c | 6 +-
> hw/ipack/tpci200.c | 6 +-
> hw/isa/i82378.c | 6 +-
> hw/isa/lpc_ich9.c | 14 +-
> hw/isa/piix4.c | 5 +-
> hw/isa/vt82c686.c | 24 +-
> hw/misc/applesmc.c | 5 +-
> hw/misc/pci-testdev.c | 6 +-
> hw/net/e1000.c | 6 +-
> hw/net/eepro100.c | 6 +-
> hw/net/lance.c | 3 +-
> hw/net/ne2000.c | 6 +-
> hw/net/pcnet-pci.c | 6 +-
> hw/net/pcnet.c | 4 +-
> hw/net/rtl8139.c | 6 +-
> hw/net/vhost_net.c | 2 +-
> hw/net/virtio-net.c | 57 +-
> hw/net/vmxnet3.c | 6 +-
> hw/pci-bridge/dec.c | 5 +-
> hw/pci-host/apb.c | 5 +-
> hw/pci-host/bonito.c | 6 +-
> hw/pci-host/grackle.c | 5 +-
> hw/pci-host/piix.c | 12 +-
> hw/pci-host/ppce500.c | 6 +-
> hw/pci-host/prep.c | 6 +-
> hw/pci-host/q35.c | 5 +-
> hw/pci-host/uninorth.c | 20 +-
> hw/pci-host/versatile.c | 5 +-
> hw/pci/pci-hotplug-old.c | 342 ------
> hw/pci/pci.c | 127 ++-
> hw/s390x/virtio-ccw.c | 12 +-
> hw/scsi/virtio-scsi.c | 9 +-
> hw/sd/sdhci.c | 5 +-
> hw/tpm/tpm_passthrough.c | 37 +-
> hw/tpm/tpm_tis.c | 131 ++-
> hw/usb/hcd-ehci-pci.c | 6 +-
> hw/usb/hcd-xhci.c | 6 +-
> hw/virtio/dataplane/vring.c | 10 +-
> hw/virtio/virtio-balloon.c | 2 +-
> hw/virtio/virtio-bus.c | 14 -
> hw/virtio/virtio-mmio.c | 2 +-
> hw/virtio/virtio-pci.c | 63 +-
> hw/virtio/virtio.c | 33 +-
> hw/watchdog/wdt_i6300esb.c | 6 +-
> stubs/pci-drive-hot-add.c | 10 -
> tests/bios-tables-test.c | 45 +-
> vl.c | 34 +-
> default-configs/i386-softmmu.mak | 1 -
> default-configs/x86_64-softmmu.mak | 1 -
> hmp-commands.hx | 32 -
> hw/acpi/Makefile.objs | 1 +
> hw/i386/Makefile.objs | 4 +-
> hw/i386/acpi-dsdt-cpu-hotplug.dsl | 17 +-
> hw/i386/acpi-dsdt-isa.dsl | 11 -
> hw/i386/acpi-dsdt-mem-hotplug.dsl | 36 +-
> hw/i386/acpi-dsdt-pci-crs.dsl | 92 --
> hw/i386/acpi-dsdt.dsl | 46 -
> hw/i386/acpi-dsdt.hex.generated | 224 +---
> hw/i386/q35-acpi-dsdt.dsl | 19 -
> hw/i386/q35-acpi-dsdt.hex.generated | 224 +---
> hw/i386/ssdt-mem.dsl | 77 --
> hw/i386/ssdt-mem.hex.generated | 213 ----
> hw/i386/ssdt-misc.dsl | 122 --
> hw/i386/ssdt-misc.hex.generated | 399 -------
> hw/i386/ssdt-pcihp.dsl | 100 --
> hw/i386/ssdt-pcihp.hex.generated | 251 -----
> hw/i386/ssdt-proc.dsl | 63 --
> hw/i386/ssdt-proc.hex.generated | 134 ---
> hw/pci/Makefile.objs | 2 -
> scripts/update-linux-headers.sh | 52 +-
> stubs/Makefile.objs | 1 -
> tests/acpi-test-data/pc/DSDT | Bin 3621 -> 2970 bytes
> tests/acpi-test-data/pc/SSDT | Bin 2279 -> 2476 bytes
> tests/acpi-test-data/pc/SSDT.bridge | Bin 0 -> 4335 bytes
> tests/acpi-test-data/q35/DSDT | Bin 8211 -> 7608 bytes
> tests/acpi-test-data/q35/SSDT | Bin 560 -> 681 bytes
> tests/acpi-test-data/q35/SSDT.bridge | Bin 0 -> 698 bytes
> 153 files changed, 3576 insertions(+), 4409 deletions(-)
> create mode 100644 include/hw/acpi/aml-build.h
> create mode 100644 include/standard-headers/asm-s390/kvm_virtio.h
> create mode 100644 include/standard-headers/asm-s390/virtio-ccw.h
> create mode 100644 include/standard-headers/linux/if_ether.h
> create mode 100644 include/standard-headers/linux/types.h
> create mode 100644 include/standard-headers/linux/virtio_9p.h
> create mode 100644 include/standard-headers/linux/virtio_balloon.h
> create mode 100644 include/standard-headers/linux/virtio_blk.h
> create mode 100644 include/standard-headers/linux/virtio_config.h
> create mode 100644 include/standard-headers/linux/virtio_console.h
> create mode 100644 include/standard-headers/linux/virtio_ids.h
> create mode 100644 include/standard-headers/linux/virtio_net.h
> create mode 100644 include/standard-headers/linux/virtio_pci.h
> rename include/{hw/virtio => standard-headers/linux}/virtio_ring.h (61%)
> create mode 100644 include/standard-headers/linux/virtio_rng.h
> create mode 100644 include/standard-headers/linux/virtio_scsi.h
> create mode 100644 include/standard-headers/linux/virtio_types.h
> create mode 100644 hw/acpi/aml-build.c
> delete mode 100644 hw/pci/pci-hotplug-old.c
> delete mode 100644 stubs/pci-drive-hot-add.c
> delete mode 100644 hw/i386/acpi-dsdt-pci-crs.dsl
> delete mode 100644 hw/i386/ssdt-mem.dsl
> delete mode 100644 hw/i386/ssdt-mem.hex.generated
> delete mode 100644 hw/i386/ssdt-misc.dsl
> delete mode 100644 hw/i386/ssdt-misc.hex.generated
> delete mode 100644 hw/i386/ssdt-pcihp.dsl
> delete mode 100644 hw/i386/ssdt-pcihp.hex.generated
> delete mode 100644 hw/i386/ssdt-proc.dsl
> delete mode 100644 hw/i386/ssdt-proc.hex.generated
> create mode 100644 tests/acpi-test-data/pc/SSDT.bridge
> create mode 100644 tests/acpi-test-data/q35/SSDT.bridge
>
next prev parent reply other threads:[~2015-03-02 14:32 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-02 10:58 [Qemu-devel] [PULL v3 00/26] pci, pc, virtio fixes and cleanups Michael S. Tsirkin
2015-03-02 10:58 ` [Qemu-devel] [PULL v3 01/26] balloon: call qdev_alias_all_properties for proxy dev in balloon class init Michael S. Tsirkin
2015-03-02 10:58 ` [Qemu-devel] [PULL v3 02/26] tpm: Extend sts register to 32 bit Michael S. Tsirkin
2015-03-02 10:58 ` [Qemu-devel] [PULL v3 03/26] tpm: Allow 32 & 16 bit accesses to the registers Michael S. Tsirkin
2015-03-02 10:58 ` [Qemu-devel] [PULL v3 04/26] tpm: Support for XFIFO register Michael S. Tsirkin
2015-03-02 10:58 ` [Qemu-devel] [PULL v3 05/26] tpm: Support for TIS selftest done flag Michael S. Tsirkin
2015-03-02 10:58 ` [Qemu-devel] [PULL v3 06/26] tpm: Support for capability flags of TIS 1.3 Michael S. Tsirkin
2015-03-02 10:58 ` [Qemu-devel] [PULL v3 07/26] pc: acpi-build: create PCI0._CRS dynamically Michael S. Tsirkin
2015-03-02 10:58 ` [Qemu-devel] [PULL v3 08/26] pc: acpi: drop manual hole punching for PCI hotplug resources Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 09/26] pc: acpi: drop manual hole punching for CPU " Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 10/26] pc: acpi: drop manual hole punching for GPE0 resources Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 11/26] pc: acpi-build: drop remaining ssdt_misc template Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 12/26] acpi: add acpi_irq_no_flags() term Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 13/26] pc: export applesmc IO port/len Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 14/26] pc: acpi-build: drop template patching and create Device(SMC) dynamically Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 15/26] tests: ACPI test blobs update due to PCI0._CRS changes Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 16/26] tests: bios-tables-test: add support for testing bridges Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 17/26] tests: add ACPI blobs for qemu with bridge cases Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 18/26] pc: acpi-build: simplify PCI bus tree generation Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 19/26] tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation Michael S. Tsirkin
2015-03-02 10:59 ` [Qemu-devel] [PULL v3 20/26] pc: acpi-build: drop template patching and create PCI bus tree dynamically Michael S. Tsirkin
2015-03-02 11:00 ` [Qemu-devel] [PULL v3 21/26] pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs Michael S. Tsirkin
2015-03-02 11:00 ` [Qemu-devel] [PULL v3 22/26] acpi: make build_*() routines static to aml-build.c Michael S. Tsirkin
2015-03-02 11:00 ` [Qemu-devel] [PULL v3 23/26] pci: Give a few helpers internal linkage Michael S. Tsirkin
2015-03-02 11:00 ` [Qemu-devel] [PULL v3 24/26] pci-hotplug-old: Has been dead for five major releases, bury Michael S. Tsirkin
2015-03-02 11:00 ` [Qemu-devel] [PULL v3 25/26] acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb() Michael S. Tsirkin
2015-03-02 11:00 ` [Qemu-devel] [PULL v3 26/26] acpi-test-data: update after pci rewrite Michael S. Tsirkin
2015-03-02 14:32 ` Michael S. Tsirkin [this message]
2015-03-02 19:03 ` [Qemu-devel] [PULL v3 00/26] pci, pc, virtio fixes and cleanups Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150302143229.GA4400@redhat.com \
--to=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.