All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	galak@codeaurora.org, myungjoo.ham@samsung.com,
	cw00.choi@samsung.com, linus.walleij@linaro.org,
	gnurou@gmail.com, sameo@linux.intel.com, lgirdwood@gmail.com,
	broonie@kernel.org, rf@opensource.wolfsonmicro.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RESEND PATCH 1/6] mfd: arizona: Add support for WM8280/WM8281
Date: Tue, 3 Mar 2015 16:46:28 +0000	[thread overview]
Message-ID: <20150303164628.GD32624@x1> (raw)
In-Reply-To: <1425399576-26428-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>

On Tue, 03 Mar 2015, Charles Keepax wrote:

> From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> 
> This adds support for the Wolfson Microelectronics WM8280 and WM8281
> codecs.
> 
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> [ Minor fixup to remove potentially uninitialised variable. ]
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  drivers/mfd/Kconfig              |    5 +++--
>  drivers/mfd/arizona-core.c       |   15 +++++++++++++--
>  drivers/mfd/arizona-i2c.c        |    2 ++
>  drivers/mfd/arizona-irq.c        |    1 +
>  drivers/mfd/arizona-spi.c        |    2 ++
>  include/linux/mfd/arizona/core.h |    1 +
>  6 files changed, 22 insertions(+), 4 deletions(-)

Applied, thanks.

Will send out pull-request once this has had time to soak in -next. 

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 0ad88c7..b5fb03c 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1290,10 +1290,11 @@ config MFD_WM5102
>  	  Support for Wolfson Microelectronics WM5102 low power audio SoC
>  
>  config MFD_WM5110
> -	bool "Wolfson Microelectronics WM5110"
> +	bool "Wolfson Microelectronics WM5110 and WM8280/WM8281"
>  	depends on MFD_ARIZONA
>  	help
> -	  Support for Wolfson Microelectronics WM5110 low power audio SoC
> +	  Support for Wolfson Microelectronics WM5110 and WM8280/WM8281
> +	  low power audio SoC
>  
>  config MFD_WM8997
>  	bool "Wolfson Microelectronics WM8997"
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index 09ba8f1..9f81998 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -567,6 +567,7 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
>  const struct of_device_id arizona_of_match[] = {
>  	{ .compatible = "wlf,wm5102", .data = (void *)WM5102 },
>  	{ .compatible = "wlf,wm5110", .data = (void *)WM5110 },
> +	{ .compatible = "wlf,wm8280", .data = (void *)WM8280 },
>  	{ .compatible = "wlf,wm8997", .data = (void *)WM8997 },
>  	{},
>  };
> @@ -671,6 +672,7 @@ int arizona_dev_init(struct arizona *arizona)
>  	switch (arizona->type) {
>  	case WM5102:
>  	case WM5110:
> +	case WM8280:
>  	case WM8997:
>  		for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++)
>  			arizona->core_supplies[i].supply
> @@ -834,11 +836,19 @@ int arizona_dev_init(struct arizona *arizona)
>  #endif
>  #ifdef CONFIG_MFD_WM5110
>  	case 0x5110:
> -		type_name = "WM5110";
> -		if (arizona->type != WM5110) {
> +		switch (arizona->type) {
> +		case WM5110:
> +			type_name = "WM5110";
> +			break;
> +		case WM8280:
> +			type_name = "WM8280";
> +			break;
> +		default:
> +			type_name = "WM5110";
>  			dev_err(arizona->dev, "WM5110 registered as %d\n",
>  				arizona->type);
>  			arizona->type = WM5110;
> +			break;
>  		}
>  		apply_patch = wm5110_patch;
>  		break;
> @@ -1010,6 +1020,7 @@ int arizona_dev_init(struct arizona *arizona)
>  				      ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
>  		break;
>  	case WM5110:
> +	case WM8280:
>  		ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
>  				      ARRAY_SIZE(wm5110_devs), NULL, 0, NULL);
>  		break;
> diff --git a/drivers/mfd/arizona-i2c.c b/drivers/mfd/arizona-i2c.c
> index 9d4156f..ff782a5d 100644
> --- a/drivers/mfd/arizona-i2c.c
> +++ b/drivers/mfd/arizona-i2c.c
> @@ -44,6 +44,7 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
>  #endif
>  #ifdef CONFIG_MFD_WM5110
>  	case WM5110:
> +	case WM8280:
>  		regmap_config = &wm5110_i2c_regmap;
>  		break;
>  #endif
> @@ -87,6 +88,7 @@ static int arizona_i2c_remove(struct i2c_client *i2c)
>  static const struct i2c_device_id arizona_i2c_id[] = {
>  	{ "wm5102", WM5102 },
>  	{ "wm5110", WM5110 },
> +	{ "wm8280", WM8280 },
>  	{ "wm8997", WM8997 },
>  	{ }
>  };
> diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
> index 3a3fe7c..d063b94 100644
> --- a/drivers/mfd/arizona-irq.c
> +++ b/drivers/mfd/arizona-irq.c
> @@ -211,6 +211,7 @@ int arizona_irq_init(struct arizona *arizona)
>  #endif
>  #ifdef CONFIG_MFD_WM5110
>  	case WM5110:
> +	case WM8280:
>  		aod = &wm5110_aod;
>  
>  		switch (arizona->rev) {
> diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
> index 8ef58bc..1e845f6 100644
> --- a/drivers/mfd/arizona-spi.c
> +++ b/drivers/mfd/arizona-spi.c
> @@ -44,6 +44,7 @@ static int arizona_spi_probe(struct spi_device *spi)
>  #endif
>  #ifdef CONFIG_MFD_WM5110
>  	case WM5110:
> +	case WM8280:
>  		regmap_config = &wm5110_spi_regmap;
>  		break;
>  #endif
> @@ -84,6 +85,7 @@ static int arizona_spi_remove(struct spi_device *spi)
>  static const struct spi_device_id arizona_spi_ids[] = {
>  	{ "wm5102", WM5102 },
>  	{ "wm5110", WM5110 },
> +	{ "wm8280", WM8280 },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(spi, arizona_spi_ids);
> diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
> index 910e3aa..f970105 100644
> --- a/include/linux/mfd/arizona/core.h
> +++ b/include/linux/mfd/arizona/core.h
> @@ -24,6 +24,7 @@ enum arizona_type {
>  	WM5102 = 1,
>  	WM5110 = 2,
>  	WM8997 = 3,
> +	WM8280 = 4,
>  };
>  
>  #define ARIZONA_IRQ_GP1                    0

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  parent reply	other threads:[~2015-03-03 16:46 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-03 16:19 [RESEND PATCH 1/6] mfd: arizona: Add support for WM8280/WM8281 Charles Keepax
2015-03-03 16:19 ` [RESEND PATCH 2/6] mfd: arizona: Update binding documentation for WM8280 Charles Keepax
2015-03-03 16:46   ` Lee Jones
2015-03-03 16:19 ` [RESEND PATCH 3/6] regulator: arizona-micsupp: Add support for WM8280/WM8281 Charles Keepax
2015-03-03 16:46   ` Lee Jones
2015-03-03 16:19 ` [RESEND PATCH 4/6] gpio: arizona: " Charles Keepax
2015-03-03 16:47   ` Lee Jones
2015-03-03 16:19 ` [RESEND PATCH 5/6] extcon: " Charles Keepax
2015-03-03 16:47   ` Lee Jones
2015-03-03 16:19 ` [RESEND PATCH 6/6] ASoC: " Charles Keepax
     [not found]   ` <1425399576-26428-6-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-03-03 16:47     ` Lee Jones
2015-03-03 16:47       ` Lee Jones
2015-03-03 16:46 ` Lee Jones [this message]
     [not found] ` <1425399576-26428-1-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-03-12 13:36   ` [GIT PULL] Immutable branch between MFD, Extcon, GPIO and Regulator Lee Jones
2015-03-12 13:36     ` Lee Jones
  -- strict thread matches above, loose matches on Subject: below --
2015-02-10 11:18 [RESEND PATCH 0/6] Add support for the WM8280 and WM8281 Charles Keepax
2015-02-10 11:18 ` [RESEND PATCH 1/6] mfd: arizona: Add support for WM8280/WM8281 Charles Keepax
2015-02-10 11:18   ` Charles Keepax
2015-01-17 15:21 [RESEND PATCH 0/6] Add support for the WM8280 and WM8281 codecs Charles Keepax
2015-01-17 15:21 ` [RESEND PATCH 1/6] mfd: arizona: Add support for WM8280/WM8281 Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150303164628.GD32624@x1 \
    --to=lee.jones@linaro.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gnurou@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=pawel.moll@arm.com \
    --cc=rf@opensource.wolfsonmicro.com \
    --cc=robh+dt@kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.