From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [GIT PULL] USB driver fixes for 4.0-rc3
Date: Sun, 8 Mar 2015 13:52:43 +0100 [thread overview]
Message-ID: <20150308125243.GA452@kroah.com> (raw)
The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-4.0-rc3
for you to fetch changes up to b8cb91e058cd0c0f02059c1207293c5b31d350fa:
xhci: Workaround for PME stuck issues in Intel xhci (2015-03-06 09:47:48 -0800)
----------------------------------------------------------------
USB fixes for 4.0-rc3
Here's a round of USB fixes for 4.0-rc3.
Nothing major, the usual gadget, xhci and usb-serial fixes and a few new
device ids as well.
All have been in linux-next successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Alan Stern (1):
USB: usbfs: don't leak kernel data in siginfo
Aleksander Morgado (1):
xhci: fix reporting of 0-sized URBs in control endpoint
Andrzej Pietrasiewicz (1):
usb: gadget: configfs: don't NUL-terminate (sub)compatible ids
Arnd Bergmann (1):
usb: renesas: fix extcon dependency
Björn Gerhart (1):
cdc-acm: Add support for Denso cradle CU-321
Felipe Balbi (2):
usb: gadget: function: phonet: balance usb_ep_disable calls
usb: musb: core: add pm_runtime_irq_safe()
George Cherian (2):
usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half
usb: dwc3: dwc3-omap: Fix disable IRQ
Greg Kroah-Hartman (2):
Merge tag 'fixes-for-v4.0-rc2' of git://git.kernel.org/.../balbi/usb into usb-linus
Merge tag 'usb-serial-4.0-rc3' of git://git.kernel.org/.../johan/usb-serial into usb-linus
Hans de Goede (1):
uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS539
Johan Hovold (8):
Revert "USB: serial: make bulk_out_size a lower limit"
USB: console: add dummy __module_get
USB: serial: fix potential use-after-free after failed probe
USB: serial: fix tty-device error handling at probe
USB: serial: fix port attribute-creation race
USB: serial: clean up bus probe error handling
USB: mxuport: fix null deref when used as a console
USB: pl2303: disable break on shutdown
Lad, Prabhakar (6):
usb: gadget: function: f_hid: fix sparse warning
usb: gadget: function: f_uac2: fix sparse warnings
usb: gadget: function: f_sourcesink: fix sparse warning
usb: gadget: function: uvc: fix sparse warnings
usb: gadget: gadgetfs: fix sparse warnings
usb: gadget: function: uvc_v4l2.c: fix sparse warnings
Mark Glover (1):
USB: ftdi_sio: add PIDs for Actisense USB devices
Mathias Nyman (3):
xhci: Allocate correct amount of scratchpad buffers
xhci: Clear the host side toggle manually when endpoint is 'soft reset'
xhci: Workaround for PME stuck issues in Intel xhci
Max Mansfield (1):
usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards
Maxime Ripard (1):
usb: XHCI: platform: Move the Marvell quirks after the enabling the clocks
Michiel vd Garde (1):
USB: serial: cp210x: Adding Seletek device id's
Nicholas Mc Guire (1):
usb: isp1760: use msecs_to_jiffies for time conversion
Nicolas PLANEL (1):
USB: ch341: set tty baud speed according to tty struct
Oliver Neukum (1):
usb-storage: support for more than 8 LUNs
Tony Lindgren (2):
usb: musb: Fix use for of_property_read_bool for disabled multipoint
usb: musb: Fix getting a generic phy for musb_dsps
drivers/usb/class/cdc-acm.c | 2 +
drivers/usb/core/devio.c | 2 +
drivers/usb/dwc3/dwc3-omap.c | 30 ++++++++-
drivers/usb/gadget/configfs.c | 2 -
drivers/usb/gadget/function/f_hid.c | 2 +-
drivers/usb/gadget/function/f_phonet.c | 5 +-
drivers/usb/gadget/function/f_sourcesink.c | 4 +-
drivers/usb/gadget/function/f_uac2.c | 34 +++++-----
drivers/usb/gadget/function/uvc_v4l2.c | 1 +
drivers/usb/gadget/function/uvc_video.c | 1 +
drivers/usb/gadget/legacy/g_ffs.c | 6 +-
drivers/usb/host/xhci-pci.c | 30 +++++++++
drivers/usb/host/xhci-plat.c | 19 +++---
drivers/usb/host/xhci-ring.c | 12 +++-
drivers/usb/host/xhci.c | 100 ++++++++++++++++++++++++++---
drivers/usb/host/xhci.h | 11 +++-
drivers/usb/isp1760/isp1760-hcd.c | 6 +-
drivers/usb/musb/musb_core.c | 10 +--
drivers/usb/musb/musb_dsps.c | 32 ++++++++-
drivers/usb/musb/musb_host.c | 2 +-
drivers/usb/musb/omap2430.c | 7 +-
drivers/usb/renesas_usbhs/Kconfig | 1 +
drivers/usb/serial/bus.c | 45 ++++++-------
drivers/usb/serial/ch341.c | 15 ++---
drivers/usb/serial/console.c | 2 +
drivers/usb/serial/cp210x.c | 2 +
drivers/usb/serial/ftdi_sio.c | 19 ++++++
drivers/usb/serial/ftdi_sio_ids.h | 23 +++++++
drivers/usb/serial/mxuport.c | 3 +-
drivers/usb/serial/pl2303.c | 18 ++++--
drivers/usb/serial/usb-serial.c | 21 +++++-
drivers/usb/storage/unusual_uas.h | 7 ++
drivers/usb/storage/usb.c | 6 ++
include/linux/usb/serial.h | 3 +-
34 files changed, 374 insertions(+), 109 deletions(-)
reply other threads:[~2015-03-08 12:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150308125243.GA452@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.