From: "Bruno Prémont" <bonbons@linux-vserver.org>
To: Dave Chinner <david@fromorbit.com>
Cc: xfs@oss.sgi.com
Subject: Re: XFS crashing system with general protection fault
Date: Thu, 12 Mar 2015 15:15:27 +0100 [thread overview]
Message-ID: <20150312151527.5c043a29@pluto.restena.lu> (raw)
In-Reply-To: <20150223085621.09cd73fc@pluto.restena.lu>
Hi Dave,
Same kind of crash, but different XFS assertion quite some time earlier:
[691082.588247] XFS: Assertion failed: !xfs_isiflocked(ip), file: /data/kernel/linux-git/fs/xfs/xfs_icache.c, line: 132
[691082.603852] ------------[ cut here ]------------
[691082.609927] WARNING: CPU: 0 PID: 80 at /data/kernel/linux-git/fs/xfs/xfs_message.c:99 asswarn+0x2e/0x30()
[691082.623914] Modules linked in:
[691082.627953] CPU: 0 PID: 80 Comm: kswapd0 Not tainted 3.18.5-x86_64 #2
[691082.627953] Hardware name: HP ProLiant DL360 G6, BIOS P64 07/02/2013
[691082.627954] 0000000000000009 ffff8800da0b39c8 ffffffff817b2be3 000000000000c7c7
[691082.627958] 0000000000000000 ffff8800da0b3a08 ffffffff81088a97 ffff8800da0b3a28
[691082.627959] ffff88000f64f000 ffff88000f64f0f4 0000000000000001 ffff880212d20288
[691082.627960] Call Trace:
[691082.627964] [<ffffffff817b2be3>] dump_stack+0x46/0x58
[691082.627967] [<ffffffff81088a97>] warn_slowpath_common+0x77/0xa0
[691082.627968] [<ffffffff81088b65>] warn_slowpath_null+0x15/0x20
[691082.627969] [<ffffffff812599fe>] asswarn+0x2e/0x30
[691082.627972] [<ffffffff8124d095>] xfs_inode_free+0x105/0x130
[691082.627974] [<ffffffff8124d2cb>] xfs_reclaim_inode+0x20b/0x330
[691082.627976] [<ffffffff8124d647>] xfs_reclaim_inodes_ag+0x257/0x370
[691082.627978] [<ffffffff8124df8e>] xfs_reclaim_inodes_nr+0x2e/0x40
[691082.627980] [<ffffffff8125ca00>] xfs_fs_free_cached_objects+0x10/0x20
[691082.627983] [<ffffffff8114f511>] super_cache_scan+0x161/0x170
[691082.627986] [<ffffffff8110d3e2>] shrink_slab_node+0x112/0x1b0
[691082.627988] [<ffffffff8110ddc8>] shrink_slab+0x78/0x110
[691082.627989] [<ffffffff81110524>] kswapd_shrink_zone+0x104/0x1a0
[691082.627990] [<ffffffff81110fe2>] kswapd+0x412/0x740
[691082.627992] [<ffffffff81110bd0>] ? mem_cgroup_shrink_node_zone+0xa0/0xa0
[691082.627995] [<ffffffff810a0a34>] kthread+0xc4/0xe0
[691082.627996] [<ffffffff810a0970>] ? kthread_create_on_node+0x170/0x170
[691082.627998] [<ffffffff817bb6ac>] ret_from_fork+0x7c/0xb0
[691082.628000] [<ffffffff810a0970>] ? kthread_create_on_node+0x170/0x170
[691082.628000] ---[ end trace 32860615a046190a ]---
...
[1174615.998106] general protection fault: 0000 [#1] SMP
[1174616.003878] Modules linked in:
[1174616.009712] CPU: 7 PID: 150 Comm: kworker/7:1H Tainted: G W 3.18.5-x86_64 #2
[1174616.021656] Hardware name: HP ProLiant DL360 G6, BIOS P64 07/02/2013
[1174616.029843] Workqueue: xfslogd xfs_buf_ioend_work
[1174616.037743] task: ffff8800da094410 ti: ffff880212d0c000 task.ti: ffff880212d0c000
[1174616.047840] RIP: 0010:[<ffffffff81271477>] [<ffffffff81271477>] xfs_trans_ail_delete_bulk+0x87/0x1a0
[1174616.061787] RSP: 0018:ffff880212d0fcc8 EFLAGS: 00010202
[1174616.069774] RAX: dead000000100100 RBX: ffff8800da0ad1c8 RCX: ffff8800da0ad1d8
[1174616.079853] RDX: 6b6b6b6b6b6b6b6b RSI: 6b6b6b6b6b6b6b6b RDI: ffff8800da0ad1c8
[1174616.091660] RBP: ffff880212d0fd18 R08: 0000000000000000 R09: 0000000000000000
[1174616.101731] R10: ffff8801b6953920 R11: 0000000000000246 R12: ffff88017b911dc0
[1174616.111797] R13: ffff880212d0fd38 R14: ffff8801187242c0 R15: 0000000000000000
[1174616.121868] FS: 0000000000000000(0000) GS:ffff88021fbc0000(0000) knlGS:0000000000000000
[1174616.133877] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[1174616.141940] CR2: ffffffffff600400 CR3: 0000000001c15000 CR4: 00000000000007e0
[1174616.153753] Stack:
[1174616.155886] ffff880212d0fd28 00000008810aeaf9 ffff8800da0ad1d8 ffff880212d0fd38
[1174616.167781] ffff8800da0ad1d8 0000000000000002 0000000000000002 ffff8800da0ad1c8
[1174616.177889] 0000000000000000 ffff880085fac370 ffff880212d0fd88 ffffffff81269614
[1174616.189731] Call Trace:
[1174616.191957] [<ffffffff81269614>] xfs_iflush_done+0x1b4/0x1e0
[1174616.201870] [<ffffffff810b008c>] ? put_prev_entity+0x2c/0x3b0
[1174616.209851] [<ffffffff812675d1>] xfs_buf_do_callbacks+0x61/0x80
[1174616.217967] [<ffffffff81267879>] xfs_buf_iodone_callbacks+0x29/0x140
[1174616.227939] [<ffffffff81245c1b>] xfs_buf_ioend+0x9b/0xe0
[1174616.235912] [<ffffffff81245c70>] xfs_buf_ioend_work+0x10/0x20
[1174616.245743] [<ffffffff8109c564>] process_one_work+0x134/0x360
[1174616.253842] [<ffffffff8109cb49>] worker_thread+0x119/0x440
[1174616.261864] [<ffffffff8109ca30>] ? rescuer_thread+0x2a0/0x2a0
[1174616.269954] [<ffffffff810a0a34>] kthread+0xc4/0xe0
[1174616.277852] [<ffffffff810a0970>] ? kthread_create_on_node+0x170/0x170
[1174616.287813] [<ffffffff817bb6ac>] ret_from_fork+0x7c/0xb0
[1174616.295865] [<ffffffff810a0970>] ? kthread_create_on_node+0x170/0x170
[1174616.305776] Code: 1f 44 00 00 4d 8b 75 00 49 83 c5 08 41 f6 46 34 01 0f 84 9d 00 00 00 48 b8 00 01 10 00 00 00 ad de 49 8b 36 48 89 df 49 8b 56 08 <48> 89 56 08 48 89 32 4c 89 f6 49 89 06 48 b8 00 02 20 00 00 00
[1174616.331988] RIP [<ffffffff81271477>] xfs_trans_ail_delete_bulk+0x87/0x1a0
[1174616.341982] RSP <ffff880212d0fcc8>
[1174616.519286] ---[ end trace 32860615a046190b ]---
[1174616.525298] BUG: unable to handle kernel paging request at ffffffffffffffd8
[1174616.525302] IP: [<ffffffff810a0efc>] kthread_data+0xc/0x20
[1174616.525305] PGD 1c16067 PUD 1c18067 PMD 0
[1174616.525307] Oops: 0000 [#2] SMP
[1174616.525308] Modules linked in:
[1174616.525309] CPU: 7 PID: 150 Comm: kworker/7:1H Tainted: G D W 3.18.5-x86_64 #2
[1174616.525310] Hardware name: HP ProLiant DL360 G6, BIOS P64 07/02/2013
[1174616.525318] task: ffff8800da094410 ti: ffff880212d0c000 task.ti: ffff880212d0c000
[1174616.525319] RIP: 0010:[<ffffffff810a0efc>] [<ffffffff810a0efc>] kthread_data+0xc/0x20
[1174616.525321] RSP: 0018:ffff880212d0fa50 EFLAGS: 00010092
[1174616.525322] RAX: 0000000000000000 RBX: 0000000000000007 RCX: 000000000000000f
[1174616.525323] RDX: 0000000000000000 RSI: 0000000000000007 RDI: ffff8800da094410
[1174616.525323] RBP: ffff880212d0fa68 R08: 000000000000c000 R09: 000000000000bb57
[1174616.525324] R10: 0000000000000000 R11: ffffea00037c9400 R12: ffff8800da094818
[1174616.525325] R13: 0000000000000007 R14: 0000000000000000 R15: ffff8800da094410
[1174616.525326] FS: 0000000000000000(0000) GS:ffff88021fbc0000(0000) knlGS:0000000000000000
[1174616.525327] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[1174616.525328] CR2: 0000000000000028 CR3: 0000000001c15000 CR4: 00000000000007e0
[1174616.525328] Stack:
[1174616.525328] ffffffff8109cee0 ffff880212d0fa68 ffff88021fbd0980 ffff880212d0fad8
[1174616.525330] ffffffff817b7e53 ffff880212d0fa88 ffff8800da094410 0000000000010980
[1174616.525331] ffffffff8108946d ffff880212d0ffd8 0000000000010980 ffff880212d0faa8
[1174616.525332] Call Trace:
[1174616.525333] [<ffffffff8109cee0>] ? wq_worker_sleeping+0x10/0xa0
[1174616.525335] [<ffffffff817b7e53>] __schedule+0x393/0x5e0
[1174616.525338] [<ffffffff8108946d>] ? release_task+0x2fd/0x3f0
[1174616.525341] [<ffffffff817b80c4>] schedule+0x24/0x70
[1174616.525342] [<ffffffff8108aa3a>] do_exit+0x65a/0x970
[1174616.525344] [<ffffffff81005f29>] oops_end+0x89/0xd0
[1174616.525348] [<ffffffff810060a6>] die+0x46/0x70
[1174616.525349] [<ffffffff81003b0a>] do_general_protection+0xca/0x150
[1174616.525351] [<ffffffff817bcd42>] general_protection+0x22/0x30
[1174616.525354] [<ffffffff81271477>] ? xfs_trans_ail_delete_bulk+0x87/0x1a0
[1174616.525356] [<ffffffff81271497>] ? xfs_trans_ail_delete_bulk+0xa7/0x1a0
[1174616.525357] [<ffffffff81269614>] xfs_iflush_done+0x1b4/0x1e0
[1174616.525359] [<ffffffff810b008c>] ? put_prev_entity+0x2c/0x3b0
[1174616.525360] [<ffffffff812675d1>] xfs_buf_do_callbacks+0x61/0x80
[1174616.525362] [<ffffffff81267879>] xfs_buf_iodone_callbacks+0x29/0x140
[1174616.525363] [<ffffffff81245c1b>] xfs_buf_ioend+0x9b/0xe0
[1174616.525364] [<ffffffff81245c70>] xfs_buf_ioend_work+0x10/0x20
[1174616.525366] [<ffffffff8109c564>] process_one_work+0x134/0x360
[1174616.525368] [<ffffffff8109cb49>] worker_thread+0x119/0x440
[1174616.525370] [<ffffffff8109ca30>] ? rescuer_thread+0x2a0/0x2a0
[1174616.525371] [<ffffffff810a0a34>] kthread+0xc4/0xe0
[1174616.525373] [<ffffffff810a0970>] ? kthread_create_on_node+0x170/0x170
[1174616.525374] [<ffffffff817bb6ac>] ret_from_fork+0x7c/0xb0
[1174616.525376] [<ffffffff810a0970>] ? kthread_create_on_node+0x170/0x170
[1174616.525377] Code: 48 89 e5 5d 48 8b 40 c8 48 c1 e8 02 83 e0 01 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 8b 87 b0 03 00 00 55 48 89 e5 5d <48> 8b 40 d8 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55
[1174616.525393] RIP [<ffffffff810a0efc>] kthread_data+0xc/0x20
[1174616.525395] RSP <ffff880212d0fa50>
[1174616.525395] CR2: ffffffffffffffd8
[1174616.525396] ---[ end trace 32860615a046190c ]---
[1174616.525397] Fixing recursive fault but reboot is needed!
...
Cheers,
Bruno
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
prev parent reply other threads:[~2015-03-12 14:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-24 10:14 XFS crashing system with general protection fault Bruno Prémont
2014-12-28 11:51 ` Dave Chinner
2014-12-29 7:44 ` Bruno Prémont
2015-01-13 7:17 ` Bruno Prémont
2015-02-05 14:10 ` Bruno Prémont
2015-02-05 22:15 ` Dave Chinner
2015-02-09 8:47 ` Bruno Prémont
2015-02-09 21:24 ` Dave Chinner
2015-02-10 7:05 ` Bruno Prémont
2015-02-23 7:56 ` Bruno Prémont
2015-03-12 14:15 ` Bruno Prémont [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150312151527.5c043a29@pluto.restena.lu \
--to=bonbons@linux-vserver.org \
--cc=david@fromorbit.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.