From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] Commit 7ae47f6b causes a warning
Date: Sat, 14 Mar 2015 22:35:55 +0100 [thread overview]
Message-ID: <20150314223555.2a38520f@lilith> (raw)
In-Reply-To: <1422966166-3973-12-git-send-email-oe5hpm@oevsv.at>
Hello Hannes,
On Tue, 3 Feb 2015 13:22:34 +0100, Hannes Petermaier <oe5hpm@oevsv.at>
wrote:
> diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
> index e9d5d01..d7ea1c9 100644
> --- a/include/configs/bur_am335x_common.h
> +++ b/include/configs/bur_am335x_common.h
> @@ -12,6 +12,23 @@
> #ifndef __BUR_AM335X_COMMON_H__
> #define __BUR_AM335X_COMMON_H__
> /* ------------------------------------------------------------------------- */
> +#define BUR_COMMON_ENV \
> +"defaultip=192.168.60.253\0" \
> +"defaultsip=192.168.60.254\0" \
> +"netconsole=echo switching to network console ...; " \
> +"if dhcp; then " \
> +"setenv ncip ${serverip}; else " \
> +"setenv ncip 192.168.60.254; " \
> +"setenv serverip 192.168.60.254; " \
> +"setenv gatewayip 192.168.60.254; " \
> +"setenv ipaddr 192.168.60.1; " \
> +"fi;" \
> +"setenv netdisplay0 '" \
> +"setcurs 1 9; puts myip; setcurs 10 9; puts ${ipaddr};" \
> +"setcurs 1 10;puts serverip; setcurs 10 10; puts ${serverip}\;'" \
This line contains a '\;' sequence which gcc warns against:
cc1: warning: unknown escape sequence: '\;' [enabled by default]
Could you post a fix?
Amicalement,
--
Albert.
next prev parent reply other threads:[~2015-03-14 21:35 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-03 12:22 [U-Boot] [PATCH v2 01/24] drivers/video/am335x-fb: Add possibility to wait for stable power/picture Hannes Petermaier
2015-02-03 12:22 ` [U-Boot] [PATCH v2 02/24] common/lcd: Add command for setting cursor within lcd-console Hannes Petermaier
2015-03-06 15:44 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 03/24] common/lcd: Add command for writing to lcd-display Hannes Petermaier
2015-03-06 15:44 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 04/24] board/BuR/common: Take usage of am335x LCD-Display Hannes Petermaier
2015-03-06 15:44 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 05/24] board/BuR/common: try to setup cpsw mac-address from the devicetree Hannes Petermaier
2015-03-06 15:44 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 06/24] board/BuR/tseries: Enable HW-Watchdog Hannes Petermaier
2015-03-06 15:44 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 07/24] board/BuR/tseries: Enable U-Boot BOOTCOUNT feature Hannes Petermaier
2015-03-06 15:44 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 08/24] board/BuR/tseries: Enable EXT4 support Hannes Petermaier
2015-03-06 15:44 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 09/24] board/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput Hannes Petermaier
2015-03-06 15:45 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 10/24] board/BuR/tseries: Chg pinmux - use free NAND Pins in non NAND-config as GPIO Hannes Petermaier
2015-03-06 15:45 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 11/24] board/BuR/tseries: Chg Pinmux - enable UART1 pins Hannes Petermaier
2015-03-06 15:45 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 12/24] board/BuR/common: Introduce Network Console and common environment for it Hannes Petermaier
2015-03-06 15:45 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-03-14 21:35 ` Albert ARIBAUD [this message]
2015-03-16 7:53 ` [U-Boot] Commit 7ae47f6b causes a warning Hannes Petermaier
2015-02-03 12:22 ` [U-Boot] [PATCH v2 13/24] board/BuR/common: Enable CONFIG_CMD_TIME Hannes Petermaier
2015-03-06 15:45 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 14/24] board/BuR/common: Add support for displaying BMP on LCD Hannes Petermaier
2015-03-06 15:45 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 15/24] board/BuR/tseries: Rework default-environment settings Hannes Petermaier
2015-03-06 15:45 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 16/24] board/BuR/tseries: cosmetic changes Hannes Petermaier
2015-03-06 15:45 ` [U-Boot] [U-Boot,v2,16/24] " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 17/24] board/BuR/kwb: switch to board HW-Rev3 Hannes Petermaier
2015-03-06 15:46 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 18/24] board/BuR/kwb: Support booting Linux Hannes Petermaier
2015-03-06 15:46 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 19/24] board/BuR/kwb: Redesign default-environment Hannes Petermaier
2015-03-06 15:46 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 20/24] board/BuR/kwb: Form a bootline for vxWorks Hannes Petermaier
2015-03-06 15:46 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 21/24] board/BuR/kwb: Support modify bootcmd through reset-controller Hannes Petermaier
2015-03-06 15:46 ` [U-Boot] [U-Boot, v2, " Tom Rini
2015-02-03 12:22 ` [U-Boot] [PATCH v2 22/24] intern: disable lcd-stdout Hannes Petermaier
2015-02-03 12:30 ` Hannes Petermaier
2015-02-03 12:22 ` [U-Boot] [PATCH v2 23/24] intern: Add specific offset do FAT-Filesystem Hannes Petermaier
2015-02-03 12:31 ` Hannes Petermaier
2015-02-03 12:22 ` [U-Boot] [PATCH v2 24/24] intern: Add copy scripts and target specific helpers Hannes Petermaier
2015-02-03 12:31 ` Hannes Petermaier
2015-03-06 15:44 ` [U-Boot] [U-Boot, v2, 01/24] drivers/video/am335x-fb: Add possibility to wait for stable power/picture Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150314223555.2a38520f@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.