From: Paul Mackerras <paulus@samba.org>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH] powerpc/powernv: Fixes for hypervisor doorbell handling
Date: Thu, 19 Mar 2015 17:03:50 +1100 [thread overview]
Message-ID: <20150319060349.GA24870@drongo> (raw)
Since we can now use hypervisor doorbells for host IPIs, this makes
sure we clear the host IPI flag when taking a doorbell interrupt, and
clears any pending doorbell IPI in pnv_smp_cpu_kill_self() (as we
already do for IPIs sent via the XICS interrupt controller). Otherwise
if there did happen to be a leftover pending doorbell interrupt for
an offline CPU thread for any reason, it would prevent that thread from
going into a power-saving mode; it would instead keep waking up because
of the interrupt.
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
arch/powerpc/include/asm/reg.h | 3 +++
arch/powerpc/kernel/dbell.c | 2 ++
arch/powerpc/platforms/powernv/smp.c | 13 +++++++++++--
3 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 1c874fb..af56b5c 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -608,13 +608,16 @@
#define SRR1_ISI_N_OR_G 0x10000000 /* ISI: Access is no-exec or G */
#define SRR1_ISI_PROT 0x08000000 /* ISI: Other protection fault */
#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */
+#define SRR1_WAKEMASK_P8 0x003c0000 /* reason for wakeup on POWER8 */
#define SRR1_WAKESYSERR 0x00300000 /* System error */
#define SRR1_WAKEEE 0x00200000 /* External interrupt */
#define SRR1_WAKEMT 0x00280000 /* mtctrl */
#define SRR1_WAKEHMI 0x00280000 /* Hypervisor maintenance */
#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */
+#define SRR1_WAKEDBELL 0x00140000 /* Privileged doorbell on P8 */
#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */
#define SRR1_WAKERESET 0x00100000 /* System reset */
+#define SRR1_WAKEHDBELL 0x000c0000 /* Hypervisor doorbell on P8 */
#define SRR1_WAKESTATE 0x00030000 /* Powersave exit mask [46:47] */
#define SRR1_WS_DEEPEST 0x00030000 /* Some resources not maintained,
* may not be recoverable */
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index f421781..2128f3a 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -17,6 +17,7 @@
#include <asm/dbell.h>
#include <asm/irq_regs.h>
+#include <asm/kvm_ppc.h>
#ifdef CONFIG_SMP
void doorbell_setup_this_cpu(void)
@@ -41,6 +42,7 @@ void doorbell_exception(struct pt_regs *regs)
may_hard_irq_enable();
+ kvmppc_set_host_ipi(smp_processor_id(), 0);
__this_cpu_inc(irq_stat.doorbell_irqs);
smp_ipi_demux();
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index fc34025..7259a24 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -33,6 +33,7 @@
#include <asm/runlatch.h>
#include <asm/code-patching.h>
#include <asm/dbell.h>
+#include <asm/kvm_ppc.h>
#include "powernv.h"
@@ -149,7 +150,7 @@ static int pnv_smp_cpu_disable(void)
static void pnv_smp_cpu_kill_self(void)
{
unsigned int cpu;
- unsigned long srr1;
+ unsigned long srr1, wmask;
u32 idle_states;
/* Standard hot unplug procedure */
@@ -161,6 +162,10 @@ static void pnv_smp_cpu_kill_self(void)
generic_set_cpu_dead(cpu);
smp_wmb();
+ wmask = SRR1_WAKEMASK;
+ if (cpu_has_feature(CPU_FTR_ARCH_207S))
+ wmask = SRR1_WAKEMASK_P8;
+
idle_states = pnv_get_supported_cpuidle_states();
/* We don't want to take decrementer interrupts while we are offline,
* so clear LPCR:PECE1. We keep PECE2 enabled.
@@ -191,10 +196,14 @@ static void pnv_smp_cpu_kill_self(void)
* having finished executing in a KVM guest, then srr1
* contains 0.
*/
- if ((srr1 & SRR1_WAKEMASK) == SRR1_WAKEEE) {
+ if ((srr1 & wmask) == SRR1_WAKEEE) {
icp_native_flush_interrupt();
local_paca->irq_happened &= PACA_IRQ_HARD_DIS;
smp_mb();
+ } else if ((srr1 & wmask) == SRR1_WAKEHDBELL) {
+ unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER);
+ asm volatile(PPC_MSGCLR(%0) : : "r" (msg));
+ kvmppc_set_host_ipi(cpu, 0);
}
if (cpu_core_split_required())
--
2.1.4
reply other threads:[~2015-03-19 6:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150319060349.GA24870@drongo \
--to=paulus@samba.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.