From: Daniel Vetter <daniel@ffwll.ch>
To: Chris Wilson <chris@chris-wilson.co.uk>,
intel-gfx@lists.freedesktop.org,
Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: Re: [PATCH v3] drm/i915: Optimistically spin for the request completion
Date: Fri, 20 Mar 2015 15:54:01 +0100 [thread overview]
Message-ID: <20150320145401.GR1349@phenom.ffwll.local> (raw)
In-Reply-To: <20150319151615.GQ10812@nuc-i3427.alporthouse.com>
On Thu, Mar 19, 2015 at 03:16:15PM +0000, Chris Wilson wrote:
> On Thu, Mar 12, 2015 at 11:11:17AM +0000, Chris Wilson wrote:
> > This provides a nice boost to mesa in swap bound scenarios (as mesa
> > throttles itself to the previous frame and given the scenario that will
> > complete shortly). It will also provide a good boost to systems running
> > with semaphores disabled and so frequently waiting on the GPU as it
> > switches rings. In the most favourable of microbenchmarks, this can
> > increase performance by around 15% - though in practice improvements
> > will be marginal and rarely noticeable.
> >
> > v2: Account for user timeouts
> > v3: Limit the spinning to a single jiffie (~1us) at most. On an
> > otherwise idle system, there is no scheduler contention and so without a
> > limit we would spin until the GPU is ready.
> >
> > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> > Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
>
> Just recording ideas for the future. Replace the busy-spin with
> monitor/mwait. This requires Pentium4+, a cooperating GPU with working
> cacheline snooping and that we use HWS seqno.
Just for the record: Did it help with powersaving or was it all in the
noise?
-Daniel
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index 85e71e0e2340..454a38d4caa3 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -37,6 +37,7 @@
> #include <linux/swap.h>
> #include <linux/pci.h>
> #include <linux/dma-buf.h>
> +#include <asm/mwait.h>
>
> #define RQ_BUG_ON(expr)
>
> @@ -1187,18 +1188,42 @@ static int __i915_spin_request(struct drm_i915_gem_request *req)
> unsigned long timeout;
> int ret = -EBUSY;
>
> + if (ring->irq_refcount) /* IRQ is already active, keep using it */
> + return ret;
> +
> intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
> timeout = jiffies + 1;
> - while (!need_resched()) {
> - if (i915_gem_request_completed(req, true)) {
> - ret = 0;
> - goto out;
> - }
> + if (this_cpu_has(X86_FEATURE_MWAIT)) {
> + do {
> + unsigned long ecx = 1; /* break on interrupt */
> + unsigned long eax = 0; /* cstate */
>
> - if (time_after_eq(jiffies, timeout))
> - break;
> + __monitor((void *)&ring->status_page.page_addr[I915_GEM_HWS_INDEX], 0, 0);
> + if (need_resched())
> + break;
> +
> + if (i915_gem_request_completed(req, true)) {
> + ret = 0;
> + goto out;
> + }
>
> - cpu_relax_lowlatency();
> + if (time_after_eq(jiffies, timeout))
> + break;
> +
> + __mwait(eax, ecx);
> + } while (1);
> + } else {
> + while (!need_resched()) {
> + if (i915_gem_request_completed(req, true)) {
> + ret = 0;
> + goto out;
> + }
> +
> + if (time_after_eq(jiffies, timeout))
> + break;
> +
> + cpu_relax_lowlatency();
> + }
> }
> if (i915_gem_request_completed(req, false))
> ret = 0;
>
>
> --
> Chris Wilson, Intel Open Source Technology Centre
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-03-20 14:52 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-11 15:29 [PATCH v2] drm/i915: Optimistically spin for the request completion Chris Wilson
2015-03-11 21:18 ` Chris Wilson
2015-03-12 9:07 ` Chris Wilson
2015-03-12 9:17 ` Daniel Vetter
2015-03-12 11:11 ` [PATCH v3] " Chris Wilson
2015-03-12 12:06 ` Chris Wilson
2015-03-12 13:14 ` Tvrtko Ursulin
2015-03-12 13:18 ` Chris Wilson
2015-03-12 15:18 ` Tvrtko Ursulin
2015-03-12 16:28 ` Chris Wilson
2015-03-12 16:41 ` Tvrtko Ursulin
2015-03-12 16:50 ` Chris Wilson
2015-03-12 17:32 ` Tvrtko Ursulin
2015-03-13 9:33 ` Daniel Vetter
2015-03-12 19:27 ` shuang.he
2015-03-19 15:16 ` Chris Wilson
2015-03-20 14:54 ` Daniel Vetter [this message]
2015-03-20 15:27 ` Chris Wilson
2015-03-20 14:36 ` [PATCH v4] " Chris Wilson
2015-03-20 16:01 ` Tvrtko Ursulin
2015-03-20 16:19 ` Chris Wilson
2015-03-20 16:31 ` Tvrtko Ursulin
2015-03-23 8:29 ` Daniel Vetter
2015-03-20 22:59 ` Chris Wilson
2015-03-21 9:49 ` Chris Wilson
2015-03-23 8:31 ` Daniel Vetter
2015-03-23 9:09 ` Chris Wilson
2015-03-20 21:30 ` shuang.he
2015-03-11 23:07 ` [PATCH v2] " shuang.he
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150320145401.GR1349@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=chris@chris-wilson.co.uk \
--cc=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.