Re: [PATCH V9 02/10] USB: f81232: implement RX bulk-in EP

[Johan Hovold <johan@kernel.org>]

On Tue, Mar 17, 2015 at 05:48:20PM +0800, Peter Hung wrote:
> The F81232 bulk-in is RX data + LSR channel, data format is
> [LSR+Data][LSR+Data]..... , We had implemented in f81232_process_read_urb().
> 
> Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>

>  static void f81232_process_read_urb(struct urb *urb)
>  {
>  	struct usb_serial_port *port = urb->context;
> -	struct f81232_private *priv = usb_get_serial_port_data(port);
>  	unsigned char *data = urb->transfer_buffer;
> -	char tty_flag = TTY_NORMAL;
> -	unsigned long flags;
> -	u8 line_status;
> -	int i;
> +	char tty_flag;
> +	unsigned int i;
> +	u8 lsr;
>  
> -	/* update line status */
> -	spin_lock_irqsave(&priv->lock, flags);
> -	line_status = priv->modem_status;
> -	priv->modem_status &= ~UART_STATE_TRANSIENT_MASK;
> -	spin_unlock_irqrestore(&priv->lock, flags);
> +	/* It's had 1-byte packet on open, the data is current LSR. but
> +	 * in this situation, the byte useless for open.
> +	 */

I'll change this comment to

	/*
	 * When opening the port we get a 1-byte packet with the current LSR,
	 * which we discard.
	 */

before applying. Let me know if I managed to get it wrong.

>  
> -	if (!urb->actual_length)
> +	if ((urb->actual_length < 2) || (urb->actual_length % 2))
>  		return;

I'll apply the whole series now. Thanks again for fixing up this driver!

Johan