Re: sudden hang on boot on AMD Notebook

[Olaf Hering <olaf@aepfle.de>]

On Wed, Apr 01, Olaf Hering wrote:

> On Wed, Apr 01, Ian Campbell wrote:
> 
> > Key handlers are only available via serial, I think, and not VGA which
> > it sounds like what Olaf is looking at.
> 
> This laptop has a serial port, and thats what I used to grab the output.
> No reaction there. Just today I noticed the blinking cursor. Will
> continue to poke this as time permits.

There are other issues now, suspend to ram with non-xen kernel fails as well:
...
[   58.114937] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr,commit=0
[   60.432380] EXT4-fs (dm-1): re-mounted. Opts: commit=0
[  176.984899] sky2 0000:02:00.0 eth1: disabling interface
[  179.214856] PM: Syncing filesystems ... done.
[  179.675897] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  179.677286] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  179.678601] Suspending console(s) (use no_console_suspend to debug)
[  179.679065] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  179.730066] serial 00:04: disabled
[  179.730070] acpi PNP0501:00: Cannot transition to non-D0 state from D3
[  179.814620] sd 0:0:0:0: [sda] Stopping disk
[  180.957655] PM: suspend of devices complete after 1278.434 msecs
[  180.960953] acpi PNP0C0B:03: Cannot transition to non-D0 state from D3
[  180.960960] dpm_run_callback(): acpi_subsys_suspend_late+0x0/0x22 returns -19
[  180.960962] PM: Device PNP0C0B:03 failed to suspend late: error -19
[  180.964119] PM: early resume of devices complete after 3.149 msecs
[  180.964120] PM: late suspend of devices failed
[  180.964260] ohci-pci 0000:00:12.0: enabling bus mastering
[  180.964281] ahci 0000:00:11.0: restoring config space at offset 0x4 (was 0x2300003, writing 0x2300007)
[  180.964285] ehci-pci 0000:00:12.2: enabling bus mastering
[  180.964312] ohci-pci 0000:00:13.0: enabling bus mastering
[  180.964338] ehci-pci 0000:00:13.2: enabling bus mastering
[  180.964371] ohci-pci 0000:00:14.5: enabling bus mastering
[  180.964383] ohci-pci 0000:00:16.0: enabling bus mastering
[  180.964402] ehci-pci 0000:00:16.2: enabling bus mastering
[  180.966630] sd 0:0:0:0: [sda] Starting disk
[  180.977638] radeon 0000:01:05.0: restoring config space at offset 0x4 (was 0x100003, writing 0x100007)
...

These are fan devices. Guess I have to open it some day and see if there are
any cable issues. Have to do it anyway, after HP sent it back from repair they
did not wire up the CDROM device.

Olaf