From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>, Duson Lin <dusonlin@emc.com.tw>,
Alessio Treglia <alessio@debian.org>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.com
Subject: Re: [PATCH] Input: elan_i2c - enable ELAN0600 acpi panels
Date: Fri, 3 Apr 2015 14:05:44 -0700 [thread overview]
Message-ID: <20150403210544.GC19867@dtor-ws> (raw)
In-Reply-To: <1427837698-419-1-git-send-email-benjamin.tissoires@redhat.com>
On Tue, Mar 31, 2015 at 05:34:58PM -0400, Benjamin Tissoires wrote:
> ELAN0600 seems to work just fine in mouse emulation mode through i2c-hid,
> but to have full raw touch support we need to register it in elan_i2c.ko
>
> Found on a Lenovo Yoga 3 11".
>
> Reported-and-tested-by: Alessio Treglia <alessio@debian.org>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> ---
>
> Hi,
>
> Alessio reported this touchpad on the Lenovo Yoga 3. I must say that I am
> rather surprised that we need a cross tree support to enable this panel
> and I would expect that the driver would be in the HID subtree, not a direct
> input device.
>
> I understand the driver needs to access to the raw I2C commands, but still,
> we could have worked around in the HID tree directly.
> Not to mention that the DT binding would have required only i2c-hid, not a
> custom vendor.
>
> Anyway, Jiri, Dmitry, who wants to take this one?
Hmm, so elan_i2c.ko (and elants_i2c) is intended to be used with devices
that are not compatible with HID protocol, as far as I know. I guess
there are firmwares that can do both, but then we should default to HID.
Duson, any comments?
Thanks!
>
> Cheers,
> Benjamin
>
> drivers/hid/hid-core.c | 1 +
> drivers/input/mouse/elan_i2c_core.c | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
> index 722a925..33a22f4 100644
> --- a/drivers/hid/hid-core.c
> +++ b/drivers/hid/hid-core.c
> @@ -2259,6 +2259,7 @@ static const struct hid_device_id hid_ignore_list[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
> { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x0004) },
> { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x000a) },
> + { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0400) },
> { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
> { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
> { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
> diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
> index 375d98f..ced9a9c 100644
> --- a/drivers/input/mouse/elan_i2c_core.c
> +++ b/drivers/input/mouse/elan_i2c_core.c
> @@ -1110,6 +1110,7 @@ MODULE_DEVICE_TABLE(i2c, elan_id);
> #ifdef CONFIG_ACPI
> static const struct acpi_device_id elan_acpi_id[] = {
> { "ELAN0000", 0 },
> + { "ELAN0600", 0 },
> { }
> };
> MODULE_DEVICE_TABLE(acpi, elan_acpi_id);
> --
> 2.3.4
>
--
Dmitry
next prev parent reply other threads:[~2015-04-03 21:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-31 21:34 [PATCH] Input: elan_i2c - enable ELAN0600 acpi panels Benjamin Tissoires
2015-04-03 21:05 ` Dmitry Torokhov [this message]
2015-04-09 11:02 ` duson
2015-06-11 20:19 ` Benjamin Tissoires
2015-06-22 21:37 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150403210544.GC19867@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=alessio@debian.org \
--cc=benjamin.tissoires@redhat.com \
--cc=dusonlin@emc.com.tw \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.