From: Marc Zyngier <marc.zyngier@arm.com>
To: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
linux-kernel <linux-kernel@vger.kernel.org>,
Zefan Li <lizefan@huawei.com>,
"huxinwei@huawei.com" <huxinwei@huawei.com>,
Tianhong Ding <dingtianhong@huawei.com>,
Kefeng Wang <wangkefeng.wang@huawei.com>,
Yun Wu <wuyun.wu@huawei.com>
Subject: Re: [PATCH 1/3] irqchip/gicv3-its: Adjust the implementation of its_alloc_tables
Date: Tue, 7 Apr 2015 10:33:01 +0100 [thread overview]
Message-ID: <20150407103301.3cc37dad@arm.com> (raw)
In-Reply-To: <1428392854-3228-1-git-send-email-thunder.leizhen@huawei.com>
On Tue, 7 Apr 2015 08:47:32 +0100
Zhen Lei <thunder.leizhen@huawei.com> wrote:
> For the old version, there maybe some faults:
> 1. For each Interrupt Collection table, 4K size is enough. But now the
> default is 64K(if "Page Size" field is not read-only).
Why is that a problem?
> 2. Suppose two read-only "Page Size" table exist, and software found 4K
> first, then 16K. For the first time, the value of local variable "psz"
> will drop to 4K, but we have not reinitialize it again in the loop.
> So, further process 16K read-only "Page Size" will report error.
>
> In this patch, detect all the read-only fields first. So that, no need
> to try over and over again.
Frankly, if such HW has been actually designed, the implementor needs
to be £$%^&%$"£$% pretty heavily, because this doesn't make much
sense, from a HW or SW point of view: Either you support
multiple page sizes, or you don't - you don't do it partially.
Now, do you know of any HW in the wild that is that crazy? Because I'm
not eager to have that kind of approach just because someone *could*
implement something silly. From previous discussions with Abel, I
gathered that the Huawei ITS is hardwired to 16k, which lead to commit
790b57aed156d.
Thanks,
M.
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
> drivers/irqchip/irq-gic-v3-its.c | 105 +++++++++++++++++++++++----------------
> 1 file changed, 62 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
> index 9687f8a..2577f06 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> @@ -800,20 +800,21 @@ static int its_alloc_tables(struct its_node *its)
> {
> int err;
> int i;
> - int psz = SZ_64K;
> - u64 shr = GITS_BASER_InnerShareable;
> - u64 cache = GITS_BASER_WaWb;
> + int psz;
> + u64 shr;
> + u64 cache;
>
> for (i = 0; i < GITS_BASER_NR_REGS; i++) {
> u64 val = readq_relaxed(its->base + GITS_BASER + i * 8);
> u64 type = GITS_BASER_TYPE(val);
> u64 entry_size = GITS_BASER_ENTRY_SIZE(val);
> - int order = get_order(psz);
> + int order;
> int alloc_size;
> u64 tmp;
> void *base;
>
> - if (type == GITS_BASER_TYPE_NONE)
> + switch (type) {
> + case GITS_BASER_TYPE_NONE:
> continue;
>
> /*
> @@ -824,16 +825,65 @@ static int its_alloc_tables(struct its_node *its)
> *
> * For other tables, only allocate a single page.
> */
> - if (type == GITS_BASER_TYPE_DEVICE) {
> + case GITS_BASER_TYPE_DEVICE: {
> u64 typer = readq_relaxed(its->base + GITS_TYPER);
> u32 ids = GITS_TYPER_DEVBITS(typer);
>
> - order = get_order((1UL << ids) * entry_size);
> - if (order >= MAX_ORDER) {
> - order = MAX_ORDER - 1;
> - pr_warn("%s: Device Table too large, reduce its page order to %u\n",
> - its->msi_chip.of_node->full_name, order);
> + alloc_size = (1UL << ids) * entry_size;
> + break;
> }
> +
> + default:
> + alloc_size = PAGE_SIZE;
> + break;
> + }
> +
> + psz = PAGE_SIZE;
> + shr = GITS_BASER_InnerShareable;
> + cache = GITS_BASER_WaWb;
> +
> + /* Test the fields that maybe read-only */
> + tmp = shr | (~val & GITS_BASER_PAGE_SIZE_MASK);
> + writeq_relaxed(tmp, its->base + GITS_BASER + i * 8);
> + tmp = readq_relaxed(its->base + GITS_BASER + i * 8);
> +
> + /*
> + * Shareability didn't stick. Just use
> + * whatever the read reported, which is likely
> + * to be the only thing this redistributor
> + * supports. If that's zero, make it
> + * non-cacheable as well.
> + */
> + shr = tmp & GITS_BASER_SHAREABILITY_MASK;
> + if (!shr)
> + cache = GITS_BASER_nC;
> +
> + /*
> + * "Page Size" field is read-only. Should ensure the table
> + * start address and size align to it.
> + */
> + if (!((val ^ tmp) & GITS_BASER_PAGE_SIZE_MASK))
> + switch (val & GITS_BASER_PAGE_SIZE_MASK) {
> + case GITS_BASER_PAGE_SIZE_4K:
> + psz = SZ_4K;
> + break;
> +
> + case GITS_BASER_PAGE_SIZE_16K:
> + psz = SZ_16K;
> + break;
> +
> + default:
> + psz = SZ_64K;
> + break;
> + }
> +
> + alloc_size = ALIGN(alloc_size, psz);
> +
> + order = get_order(alloc_size);
> + if (order >= MAX_ORDER) {
> + order = MAX_ORDER - 1;
> + pr_warn("%s: Device Table too large, reduce its page order to %u\n",
> + its->msi_chip.of_node->full_name, order);
> }
>
> alloc_size = (1 << order) * PAGE_SIZE;
> @@ -845,7 +895,6 @@ static int its_alloc_tables(struct its_node *its)
>
> its->tables[i] = base;
>
> -retry_baser:
> val = (virt_to_phys(base) |
> (type << GITS_BASER_TYPE_SHIFT) |
> ((entry_size - 1) << GITS_BASER_ENTRY_SIZE_SHIFT) |
> @@ -870,40 +919,10 @@ retry_baser:
> writeq_relaxed(val, its->base + GITS_BASER + i * 8);
> tmp = readq_relaxed(its->base + GITS_BASER + i * 8);
>
> - if ((val ^ tmp) & GITS_BASER_SHAREABILITY_MASK) {
> - /*
> - * Shareability didn't stick. Just use
> - * whatever the read reported, which is likely
> - * to be the only thing this redistributor
> - * supports. If that's zero, make it
> - * non-cacheable as well.
> - */
> - shr = tmp & GITS_BASER_SHAREABILITY_MASK;
> - if (!shr)
> - cache = GITS_BASER_nC;
> - goto retry_baser;
> - }
> -
> - if ((val ^ tmp) & GITS_BASER_PAGE_SIZE_MASK) {
> - /*
> - * Page size didn't stick. Let's try a smaller
> - * size and retry. If we reach 4K, then
> - * something is horribly wrong...
> - */
> - switch (psz) {
> - case SZ_16K:
> - psz = SZ_4K;
> - goto retry_baser;
> - case SZ_64K:
> - psz = SZ_16K;
> - goto retry_baser;
> - }
> - }
> -
> if (val != tmp) {
> pr_err("ITS: %s: GITS_BASER%d doesn't stick: %lx %lx\n",
> its->msi_chip.of_node->full_name, i,
> - (unsigned long) val, (unsigned long) tmp);
> + (unsigned long)val, (unsigned long)tmp);
> err = -ENXIO;
> goto out_free;
> }
> --
> 1.8.0
>
>
--
Jazz is not dead. It just smells funny.
next prev parent reply other threads:[~2015-04-07 9:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-07 7:47 [PATCH 1/3] irqchip/gicv3-its: Adjust the implementation of its_alloc_tables Zhen Lei
2015-04-07 7:47 ` [PATCH 2/3] irqchip/gicv3-its: remove GITS_BASER_TYPE_CPU base on latest spec Zhen Lei
2015-04-07 7:47 ` [PATCH 3/3] irqchip/gicv3-its: treat type reserved as 0x0 Zhen Lei
2015-04-07 9:33 ` Marc Zyngier [this message]
2015-04-07 12:32 ` [PATCH 1/3] irqchip/gicv3-its: Adjust the implementation of its_alloc_tables leizhen
2015-04-07 13:02 ` Marc Zyngier
2015-04-07 14:54 ` leizhen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150407103301.3cc37dad@arm.com \
--to=marc.zyngier@arm.com \
--cc=dingtianhong@huawei.com \
--cc=huxinwei@huawei.com \
--cc=jason@lakedaemon.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan@huawei.com \
--cc=tglx@linutronix.de \
--cc=thunder.leizhen@huawei.com \
--cc=wangkefeng.wang@huawei.com \
--cc=wuyun.wu@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.