From: Lee Jones <lee.jones@linaro.org>
To: Eduardo Valentin <edubezval@gmail.com>
Cc: ajitpal.singh@st.com, pavel@ucw.cz, rui.zhang@intel.com,
linux-kernel@vger.kernel.org
Subject: Re: patch "drivers: thermal: st: remove several sparse warnings" added to thermal-soc tree
Date: Wed, 8 Apr 2015 08:26:34 +0100 [thread overview]
Message-ID: <20150408072634.GA5162@x1> (raw)
In-Reply-To: <14284396653168@besouro>
On Tue, 07 Apr 2015, Eduardo Valentin wrote:
>
> This is a simple automated notification to let you know that
> I've just added the patch titled
>
> drivers: thermal: st: remove several sparse warnings
>
> to my thermal-soc git tree which can be found at
> git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
> in the fixes branch.
>
> The patch will show up in the next release of the linux-next tree
> (usually sometime within the next 24 hours during the week.)
>
> The patch will hopefully also be merged in Linus's tree for the
> next -rc kernel release.
>
> If you have any questions about this process, please let me know.
>
> All the best,
>
> Eduardo Valentin
>
> ----------
> From 541d529f9845d249d1cb84f1b395e48f0a117e3f Mon Sep 17 00:00:00 2001
> From: Eduardo Valentin <edubezval@gmail.com>
> Date: Tue, 7 Apr 2015 13:42:12 -0700
> Subject: drivers: thermal: st: remove several sparse warnings
>
> Simple patch to make symbols static. Symbols that are not
> shared with other parts of the kernel can be made static.
> This change also removes several sparse complains.
>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Ajit Pal Singh <ajitpal.singh@st.com>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
Hold on a second, you can't do that.
Adding these Cc: tags means "this person has been given the opportunity
to comment on the patch but has chosen not to". However, you've
applied this patch ~1min after sending it to the lists.
Please leave this patch on the lists for some time (I suggest at least
one week) before applying. This process can be sped-up if the correct
Acks are received.
> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
> ---
> drivers/thermal/st/st_thermal.c | 2 +-
> drivers/thermal/st/st_thermal_memmap.c | 8 ++++----
> drivers/thermal/st/st_thermal_syscfg.c | 12 ++++++------
> 3 files changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
> index d1ec580..76c515d 100644
> --- a/drivers/thermal/st/st_thermal.c
> +++ b/drivers/thermal/st/st_thermal.c
> @@ -25,7 +25,7 @@
> * Function to allocate regfields which are common
> * between syscfg and memory mapped based sensors
> */
> -int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor)
> +static int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor)
> {
> struct device *dev = sensor->dev;
> struct regmap *regmap = sensor->regmap;
> diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c
> index bd22339..fc0c9e1 100644
> --- a/drivers/thermal/st/st_thermal_memmap.c
> +++ b/drivers/thermal/st/st_thermal_memmap.c
> @@ -157,7 +157,7 @@ static const struct st_thermal_sensor_ops st_mmap_sensor_ops = {
> };
>
> /* Compatible device data stih416 mpe thermal sensor */
> -const struct st_thermal_compat_data st_416mpe_cdata = {
> +static const struct st_thermal_compat_data st_416mpe_cdata = {
> .reg_fields = st_mmap_thermal_regfields,
> .ops = &st_mmap_sensor_ops,
> .calibration_val = 14,
> @@ -166,7 +166,7 @@ const struct st_thermal_compat_data st_416mpe_cdata = {
> };
>
> /* Compatible device data stih407 thermal sensor */
> -const struct st_thermal_compat_data st_407_cdata = {
> +static const struct st_thermal_compat_data st_407_cdata = {
> .reg_fields = st_mmap_thermal_regfields,
> .ops = &st_mmap_sensor_ops,
> .calibration_val = 16,
> @@ -181,12 +181,12 @@ static const struct of_device_id st_mmap_thermal_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, st_mmap_thermal_of_match);
>
> -int st_mmap_probe(struct platform_device *pdev)
> +static int st_mmap_probe(struct platform_device *pdev)
> {
> return st_thermal_register(pdev, st_mmap_thermal_of_match);
> }
>
> -int st_mmap_remove(struct platform_device *pdev)
> +static int st_mmap_remove(struct platform_device *pdev)
> {
> return st_thermal_unregister(pdev);
> }
> diff --git a/drivers/thermal/st/st_thermal_syscfg.c b/drivers/thermal/st/st_thermal_syscfg.c
> index 65eab72..3df5b789 100644
> --- a/drivers/thermal/st/st_thermal_syscfg.c
> +++ b/drivers/thermal/st/st_thermal_syscfg.c
> @@ -104,7 +104,7 @@ static const struct st_thermal_sensor_ops st_syscfg_sensor_ops = {
> };
>
> /* Compatible device data for stih415 sas thermal sensor */
> -const struct st_thermal_compat_data st_415sas_cdata = {
> +static const struct st_thermal_compat_data st_415sas_cdata = {
> .sys_compat = "st,stih415-front-syscfg",
> .reg_fields = st_415sas_regfields,
> .ops = &st_syscfg_sensor_ops,
> @@ -114,7 +114,7 @@ const struct st_thermal_compat_data st_415sas_cdata = {
> };
>
> /* Compatible device data for stih415 mpe thermal sensor */
> -const struct st_thermal_compat_data st_415mpe_cdata = {
> +static const struct st_thermal_compat_data st_415mpe_cdata = {
> .sys_compat = "st,stih415-system-syscfg",
> .reg_fields = st_415mpe_regfields,
> .ops = &st_syscfg_sensor_ops,
> @@ -124,7 +124,7 @@ const struct st_thermal_compat_data st_415mpe_cdata = {
> };
>
> /* Compatible device data for stih416 sas thermal sensor */
> -const struct st_thermal_compat_data st_416sas_cdata = {
> +static const struct st_thermal_compat_data st_416sas_cdata = {
> .sys_compat = "st,stih416-front-syscfg",
> .reg_fields = st_416sas_regfields,
> .ops = &st_syscfg_sensor_ops,
> @@ -134,7 +134,7 @@ const struct st_thermal_compat_data st_416sas_cdata = {
> };
>
> /* Compatible device data for stid127 thermal sensor */
> -const struct st_thermal_compat_data st_127_cdata = {
> +static const struct st_thermal_compat_data st_127_cdata = {
> .sys_compat = "st,stid127-cpu-syscfg",
> .reg_fields = st_127_regfields,
> .ops = &st_syscfg_sensor_ops,
> @@ -152,12 +152,12 @@ static const struct of_device_id st_syscfg_thermal_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, st_syscfg_thermal_of_match);
>
> -int st_syscfg_probe(struct platform_device *pdev)
> +static int st_syscfg_probe(struct platform_device *pdev)
> {
> return st_thermal_register(pdev, st_syscfg_thermal_of_match);
> }
>
> -int st_syscfg_remove(struct platform_device *pdev)
> +static int st_syscfg_remove(struct platform_device *pdev)
> {
> return st_thermal_unregister(pdev);
> }
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next parent reply other threads:[~2015-04-08 7:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <14284396653168@besouro>
2015-04-08 7:26 ` Lee Jones [this message]
2015-04-08 9:11 ` patch "drivers: thermal: st: remove several sparse warnings" added to thermal-soc tree Pavel Machek
2015-04-08 9:45 ` Lee Jones
2015-04-08 9:59 ` Pavel Machek
2015-04-08 10:16 ` Lee Jones
2015-04-08 10:35 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150408072634.GA5162@x1 \
--to=lee.jones@linaro.org \
--cc=ajitpal.singh@st.com \
--cc=edubezval@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.