[GIT PULL] x86/apic changes for v4.1

[Ingo Molnar <mingo@kernel.org>]

Linus,

Please pull the latest x86-apic-for-linus git tree from:

   git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-apic-for-linus

   # HEAD: 1912c7afa39d2683a574011ff455fe49ada8016c x86/apic/uv: Update the UV APIC HUB check

Changes:

  - SGI UV APIC driver updates
  - dead code removal.

 Thanks,

	Ingo

------------------>
Bandan Das (1):
      x86/apic: Remove verify_local_APIC()

Mike Travis (3):
      x86/apic/uv: Update the APIC UV OEM check
      x86/apic/uv: Update the UV APIC driver check
      x86/apic/uv: Update the UV APIC HUB check


 arch/x86/include/asm/apic.h        |  1 -
 arch/x86/kernel/apic/apic.c        | 62 --------------------------
 arch/x86/kernel/apic/x2apic_uv_x.c | 89 +++++++++++++++++++++++++-------------
 arch/x86/kernel/smpboot.c          |  2 -
 4 files changed, 60 insertions(+), 94 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index efc3b22d896e..08f217354442 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -204,7 +204,6 @@ extern void clear_local_APIC(void);
 extern void disconnect_bsp_APIC(int virt_wire_setup);
 extern void disable_local_APIC(void);
 extern void lapic_shutdown(void);
-extern int verify_local_APIC(void);
 extern void sync_Arb_IDs(void);
 extern void init_bsp_APIC(void);
 extern void setup_local_APIC(void);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index ad3639ae1b9b..dcb52850a28f 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1084,67 +1084,6 @@ void lapic_shutdown(void)
 	local_irq_restore(flags);
 }
 
-/*
- * This is to verify that we're looking at a real local APIC.
- * Check these against your board if the CPUs aren't getting
- * started for no apparent reason.
- */
-int __init verify_local_APIC(void)
-{
-	unsigned int reg0, reg1;
-
-	/*
-	 * The version register is read-only in a real APIC.
-	 */
-	reg0 = apic_read(APIC_LVR);
-	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
-	apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
-	reg1 = apic_read(APIC_LVR);
-	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
-
-	/*
-	 * The two version reads above should print the same
-	 * numbers.  If the second one is different, then we
-	 * poke at a non-APIC.
-	 */
-	if (reg1 != reg0)
-		return 0;
-
-	/*
-	 * Check if the version looks reasonably.
-	 */
-	reg1 = GET_APIC_VERSION(reg0);
-	if (reg1 == 0x00 || reg1 == 0xff)
-		return 0;
-	reg1 = lapic_get_maxlvt();
-	if (reg1 < 0x02 || reg1 == 0xff)
-		return 0;
-
-	/*
-	 * The ID register is read/write in a real APIC.
-	 */
-	reg0 = apic_read(APIC_ID);
-	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
-	apic_write(APIC_ID, reg0 ^ apic->apic_id_mask);
-	reg1 = apic_read(APIC_ID);
-	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
-	apic_write(APIC_ID, reg0);
-	if (reg1 != (reg0 ^ apic->apic_id_mask))
-		return 0;
-
-	/*
-	 * The next two are just to see if we have sane values.
-	 * They're only really relevant if we're in Virtual Wire
-	 * compatibility mode, but most boxes are anymore.
-	 */
-	reg0 = apic_read(APIC_LVT0);
-	apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
-	reg1 = apic_read(APIC_LVT1);
-	apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
-
-	return 1;
-}
-
 /**
  * sync_Arb_IDs - synchronize APIC bus arbitration IDs
  */
@@ -2283,7 +2222,6 @@ int __init APIC_init_uniprocessor(void)
 		disable_ioapic_support();
 
 	default_setup_apic_routing();
-	verify_local_APIC();
 	apic_bsp_setup(true);
 	return 0;
 }
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 8e9dcfd630e4..c8d92950bc04 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -144,33 +144,60 @@ static void __init uv_set_apicid_hibit(void)
 
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	int pnodeid, is_uv1, is_uv2, is_uv3;
-
-	is_uv1 = !strcmp(oem_id, "SGI");
-	is_uv2 = !strcmp(oem_id, "SGI2");
-	is_uv3 = !strncmp(oem_id, "SGI3", 4);	/* there are varieties of UV3 */
-	if (is_uv1 || is_uv2 || is_uv3) {
-		uv_hub_info->hub_revision =
-			(is_uv1 ? UV1_HUB_REVISION_BASE :
-			(is_uv2 ? UV2_HUB_REVISION_BASE :
-				  UV3_HUB_REVISION_BASE));
-		pnodeid = early_get_pnodeid();
-		early_get_apic_pnode_shift();
-		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
-		x86_platform.nmi_init = uv_nmi_init;
-		if (!strcmp(oem_table_id, "UVL"))
-			uv_system_type = UV_LEGACY_APIC;
-		else if (!strcmp(oem_table_id, "UVX"))
-			uv_system_type = UV_X2APIC;
-		else if (!strcmp(oem_table_id, "UVH")) {
-			__this_cpu_write(x2apic_extra_bits,
-				pnodeid << uvh_apicid.s.pnode_shift);
-			uv_system_type = UV_NON_UNIQUE_APIC;
-			uv_set_apicid_hibit();
-			return 1;
-		}
+	int pnodeid;
+	int uv_apic;
+
+	if (strncmp(oem_id, "SGI", 3) != 0)
+		return 0;
+
+	/*
+	 * Determine UV arch type.
+	 *   SGI: UV100/1000
+	 *   SGI2: UV2000/3000
+	 *   SGI3: UV300 (truncated to 4 chars because of different varieties)
+	 */
+	uv_hub_info->hub_revision =
+		!strncmp(oem_id, "SGI3", 4) ? UV3_HUB_REVISION_BASE :
+		!strcmp(oem_id, "SGI2") ? UV2_HUB_REVISION_BASE :
+		!strcmp(oem_id, "SGI") ? UV1_HUB_REVISION_BASE : 0;
+
+	if (uv_hub_info->hub_revision == 0)
+		goto badbios;
+
+	pnodeid = early_get_pnodeid();
+	early_get_apic_pnode_shift();
+	x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
+	x86_platform.nmi_init = uv_nmi_init;
+
+	if (!strcmp(oem_table_id, "UVX")) {		/* most common */
+		uv_system_type = UV_X2APIC;
+		uv_apic = 0;
+
+	} else if (!strcmp(oem_table_id, "UVH")) {	/* only UV1 systems */
+		uv_system_type = UV_NON_UNIQUE_APIC;
+		__this_cpu_write(x2apic_extra_bits,
+			pnodeid << uvh_apicid.s.pnode_shift);
+		uv_set_apicid_hibit();
+		uv_apic = 1;
+
+	} else	if (!strcmp(oem_table_id, "UVL")) {	/* only used for */
+		uv_system_type = UV_LEGACY_APIC;	/* very small systems */
+		uv_apic = 0;
+
+	} else {
+		goto badbios;
 	}
-	return 0;
+
+	pr_info("UV: OEM IDs %s/%s, System/HUB Types %d/%d, uv_apic %d\n",
+		oem_id, oem_table_id, uv_system_type,
+		uv_min_hub_revision_id, uv_apic);
+
+	return uv_apic;
+
+badbios:
+	pr_err("UV: OEM_ID:%s OEM_TABLE_ID:%s\n", oem_id, oem_table_id);
+	pr_err("Current BIOS not supported, update kernel and/or BIOS\n");
+	BUG();
 }
 
 enum uv_system_type get_uv_system_type(void)
@@ -854,10 +881,14 @@ void __init uv_system_init(void)
 	unsigned long mmr_base, present, paddr;
 	unsigned short pnode_mask;
 	unsigned char n_lshift;
-	char *hub = (is_uv1_hub() ? "UV1" :
-		    (is_uv2_hub() ? "UV2" :
-				    "UV3"));
+	char *hub = (is_uv1_hub() ? "UV100/1000" :
+		    (is_uv2_hub() ? "UV2000/3000" :
+		    (is_uv3_hub() ? "UV300" : NULL)));
 
+	if (!hub) {
+		pr_err("UV: Unknown/unsupported UV hub\n");
+		return;
+	}
 	pr_info("UV: Found %s hub\n", hub);
 	map_low_mmrs();
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index febc6aabc72e..ddd2c0674cda 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1086,8 +1086,6 @@ static int __init smp_sanity_check(unsigned max_cpus)
 		return SMP_NO_APIC;
 	}
 
-	verify_local_APIC();
-
 	/*
 	 * If SMP should be disabled, then really disable it!
 	 */