All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@linux.intel.com>
Cc: "Syrjala, Ville" <ville.syrjala@intel.com>,
	intel-gfx@lists.freedesktop.org, "Zanoni,
	Paulo R" <paulo.r.zanoni@intel.com>
Subject: Re: [PATCH v2] drm/i915: Add debugfs to read any DPCD register
Date: Thu, 16 Apr 2015 17:32:39 +0300	[thread overview]
Message-ID: <20150416143239.GQ1237@intel.com> (raw)
In-Reply-To: <87egnkp3p7.fsf@intel.com>

On Thu, Apr 16, 2015 at 05:07:00PM +0300, Jani Nikula wrote:
> On Wed, 08 Apr 2015, Durgadoss R <durgadoss.r@intel.com> wrote:
> > This patch creates a connector specific debugfs
> > interface to read any particular DPCD register.
> > The DPCD register address (hex format) is written
> > to 'i915_dpcd_addr' interface and the corresponding
> > value can be read from 'i915_dpcd_val' interface.
> >
> > Example usage:
> > echo 0x70 > i915_dpcd_addr
> > cat i915_dpcd_val
> > 0x1
> >
> > v2: Address Jani's comments.
> 
> So, code-wise this looks good to me.
> 
> But like I said in my review of v1, I am undecided on whether we want to
> have this interface or not. I could really be persuaded either way.
> 
> Perhaps Ville or Paulo have an opinion?

I think having the ability to read (and also write actually) DPCD would
be nice.

So I like the idea, but it does seem a bit limited since it doesn't
allow writes. So perhaps we should just expose the entire DPCD as a
binary file and include a tool in i-g-t to read/write individual
pieces?

We could also have a tool to parse the entire thing like we have
for the vbt stuff.

> 
> BR,
> Jani.
> 
> 
> >
> > Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
> > ---
> >  drivers/gpu/drm/i915/i915_debugfs.c | 88 ++++++++++++++++++++++++++++++++++++-
> >  drivers/gpu/drm/i915/intel_drv.h    |  1 +
> >  2 files changed, 88 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> > index 10ca511..f1f365e 100644
> > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > @@ -4865,6 +4865,87 @@ static const struct file_operations i915_dpcd_fops = {
> >  	.release = single_release,
> >  };
> >  
> > +static ssize_t i915_dpcd_addr_write(struct file *file, const char __user *ubuf,
> > +				     size_t len, loff_t *offp)
> > +{
> > +	struct seq_file *m = file->private_data;
> > +	struct drm_connector *connector = m->private;
> > +	struct intel_dp *intel_dp =
> > +		enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> > +	unsigned int reg_addr;
> > +	char tmp[16];
> > +
> > +	if (len >= sizeof(tmp))
> > +		return -EINVAL;
> > +
> > +	if (copy_from_user(tmp, ubuf, len))
> > +		return -EFAULT;
> > +
> > +	tmp[len] = '\0';
> > +
> > +	if (kstrtouint(tmp, 16, &reg_addr))
> > +		return -EINVAL;
> > +
> > +	intel_dp->debugfs_dpcd_addr = reg_addr;
> > +
> > +	return len;
> > +}
> > +
> > +static int i915_dpcd_addr_show(struct seq_file *m, void *data)
> > +{
> > +	struct drm_connector *connector = m->private;
> > +	struct intel_dp *intel_dp =
> > +		enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> > +
> > +	seq_printf(m, "0x%x\n", intel_dp->debugfs_dpcd_addr);
> > +
> > +	return 0;
> > +}
> > +
> > +static int i915_dpcd_addr_open(struct inode *inode, struct file *file)
> > +{
> > +	return single_open(file, i915_dpcd_addr_show, inode->i_private);
> > +}
> > +
> > +static const struct file_operations i915_dpcd_addr_fops = {
> > +	.owner = THIS_MODULE,
> > +	.open = i915_dpcd_addr_open,
> > +	.read = seq_read,
> > +	.write = i915_dpcd_addr_write,
> > +	.llseek = seq_lseek,
> > +	.release = single_release,
> > +};
> > +
> > +static int i915_dpcd_val_show(struct seq_file *m, void *data)
> > +{
> > +	struct drm_connector *connector = m->private;
> > +	struct intel_dp *intel_dp =
> > +		enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> > +	u8 val;
> > +	int ret;
> > +
> > +	ret = drm_dp_dpcd_readb(&intel_dp->aux,
> > +				intel_dp->debugfs_dpcd_addr, &val);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	seq_printf(m, "0x%x\n", val);
> > +	return 0;
> > +}
> > +
> > +static int i915_dpcd_val_open(struct inode *inode, struct file *file)
> > +{
> > +	return single_open(file, i915_dpcd_val_show, inode->i_private);
> > +}
> > +
> > +static const struct file_operations i915_dpcd_val_fops = {
> > +	.owner = THIS_MODULE,
> > +	.open = i915_dpcd_val_open,
> > +	.read = seq_read,
> > +	.llseek = seq_lseek,
> > +	.release = single_release,
> > +};
> > +
> >  /**
> >   * i915_debugfs_connector_add - add i915 specific connector debugfs files
> >   * @connector: pointer to a registered drm_connector
> > @@ -4883,9 +4964,14 @@ int i915_debugfs_connector_add(struct drm_connector *connector)
> >  		return -ENODEV;
> >  
> >  	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> > -	    connector->connector_type == DRM_MODE_CONNECTOR_eDP)
> > +	    connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
> >  		debugfs_create_file("i915_dpcd", S_IRUGO, root, connector,
> >  				    &i915_dpcd_fops);
> > +		debugfs_create_file("i915_dpcd_addr", S_IRUGO | S_IWUSR,
> > +				root, connector, &i915_dpcd_addr_fops);
> > +		debugfs_create_file("i915_dpcd_val", S_IRUGO, root,
> > +				connector, &i915_dpcd_val_fops);
> > +	}
> >  
> >  	return 0;
> >  }
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 4799b11..0594baa 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -642,6 +642,7 @@ struct intel_dp {
> >  	unsigned long last_power_cycle;
> >  	unsigned long last_power_on;
> >  	unsigned long last_backlight_off;
> > +	unsigned int debugfs_dpcd_addr;
> >  
> >  	struct notifier_block edp_notifier;
> >  
> > -- 
> > 1.9.1
> >
> 
> -- 
> Jani Nikula, Intel Open Source Technology Center
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-04-16 14:32 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-08 11:41 [PATCH v2] drm/i915: Add debugfs to read any DPCD register Durgadoss R
2015-04-16 14:07 ` Jani Nikula
2015-04-16 14:32   ` Ville Syrjälä [this message]
2015-04-17  6:33     ` R, Durgadoss
2015-04-17 10:00       ` Ville Syrjälä
2015-04-20 11:29         ` R, Durgadoss
2015-04-20 15:44         ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150416143239.GQ1237@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=paulo.r.zanoni@intel.com \
    --cc=ville.syrjala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.