From: Vinod Koul <vinod.koul@intel.com>
To: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
Takashi Iwai <tiwai@suse.de>,
"Lin, Mengdong" <mengdong.lin@intel.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Mark Brown <broonie@kernel.org>
Subject: Re: [RFC] File format for topology data
Date: Wed, 22 Apr 2015 21:28:16 +0530 [thread overview]
Message-ID: <20150422155816.GK2738@intel.com> (raw)
In-Reply-To: <1429621606.3793.37.camel@loki>
On Tue, Apr 21, 2015 at 02:06:46PM +0100, Liam Girdwood wrote:
> I've pasted below the topology data for the broadwell firmware using the
> text file format being used by UCM. Using the UCM format allows to to
> share parser code and allows us to also have UCM define topology data.
>
> I've not yet completed the byte or enum controls but the rest of the
> data is there for comments. I've also included the recent channel
> changes suggested in the UAPI header comments.
>
> # Firmware Topology Configuration for Broadwell
>
> # TLV scale used by both global and stream volumes
> SectionTLV."hsw_vol_tlv" {
>
> DBScale [
> min "-9000"
> step "300"
> mute "1"
> ]
> }
So for our DSP we need to pass some private data, how do we go about
describing it for this and other controls?
>
> # Controls from default pipeline
> SectionControl."Default Pipeline" {
>
> Index "1"
>
> # Master DSP volume
> Mixer [
> name "Master Playback Volume"
> Channel.0 [
> map "Left"
> reg "0"
> shift "0"
> ]
> Channel.1 [
> map "Right"
> reg "0"
> shift "8"
> ]
> max "31"
> invert "false"
> get "0"
> put "0"
what do these two mean?
> tlv_array "hsw_vol_tlv"
> ]
>
> # Offload 0 volume
> Mixer [
> name "Media0 Playback Volume"
> Channel.0 [
> map "Left"
> reg "1"
> shift "0"
> ]
> Channel.1 [
> map "Right"
> reg "1"
> shift "8"
> ]
> max "31"
> invert "false"
> get "1"
> put "1"
> tlv_array "hsw_vol_tlv"
> ]
>
> # Enum controls
> Enum [
> ...
> ]
>
> # Byte controls
> Bytes [
> ...
> ]
> }
>
> # DAPM Widgets for main pipeline
> SectionWidget."Pipeline1" {
>
> Index "1"
>
> AIF_IN [
> name "SSP0 CODEC IN"
> stream_name ""
> slot ""
> reg "0"
> shift "0"
> invert "false"
> ]
>
> AIF_OUT [
> name "SSP0 CODEC OUT"
> stream_name ""
> slot ""
> reg "0"
> shift "0"
> invert "false"
> ]
>
> ...
> }
>
> # DAPM Routes
> SectionGraph."Pipeline 1 Graph" {
>
> Index 1
>
> Routes [
> "Playback VMixer, , System Playback"
> "Playback VMixer, , Offload0 Playback"
> "Playback VMixer, , Offload1 Playback"
> "SSP0 CODEC OUT, , Playback VMixer"
> "Analog Capture, , SSP0 CODEC IN"
> ]
> }
>
> # PCM Configurations supported by FW
> SectionPCMConfig."PCM 48k Stereo 24bit" {
>
> Playback [
> format "S24_LE"
> rate "48000"
> channels "2"
> tdm_slot "0xf"
> ]
>
> Capture [
> format "S24_LE"
> rate "48000"
> channels "2"
> tdm_slot "0xf"
>
> ]
> }
>
> SectionPCMConfig."PCM 48k Stereo 16bit" {
>
> Playback [
> format "S16_LE"
> rate "48000"
> channels "2"
> tdm_slot "0xf"
> ]
>
> Capture [
> format "S16_LE"
> rate "48000"
> channels "2"
> tdm_slot "0xf"
>
> ]
> }
>
> SectionPCMConfig."PCM 48k 2P/4C 16bit" {
>
> Playback [
> format "S16_LE"
> rate "48000"
> channels "2"
> tdm_slot "0xf"
> ]
>
> Capture [
> format "S16_LE"
> rate "48000"
> channels "4"
> tdm_slot "0xf"
>
> ]
> }
>
> # PCM capabilities supported by FW
> SectionPCMCapabilities."System Playback" {
>
> Capabilities [
> formats "S24_LE, S16_LE"
> rate_min "48000"
> rate_max "48000"
> channels_min "2"
> channels_max "2"
> ]
> }
>
> SectionPCMCapabilities."Analog Capture" {
>
> Capabilities [
> formats "S24_LE, S16_LE"
> rate_min "48000"
> rate_max "48000"
> channels_min "2"
> channels_max "4"
> ]
> }
>
> SectionPCMCapabilities."Offload Pin Playback" {
>
> Capabilities [
> formats "S24_LE, S16_LE"
> rate_min "8000"
> rate_max "192000"
> channels_min "2"
> channels_max "2"
> ]
> }
>
> SectionPCMCapabilities."Loopback Capture" {
>
> Capabilities [
> formats "S16_LE"
> rate_min "48000"
> rate_max "48000"
> channels_min "2"
> channels_max "2"
> ]
> }
>
> # PCM devices exported by Firmware
> SectionPCM."System Pin" {
>
> Index 1
>
> Playback [
> Capabilities "System Playback"
> Config "PCM 48k Stereo 24bit"
> Config "PCM 48k Stereo 16bit"
> ]
>
> Capture [
> Capabilities "Analog Capture"
> Config "PCM 48k Stereo 24bit"
> Config "PCM 48k Stereo 16bit"
> Config "PCM 48k 2P/4C 16bit"
> ]
> }
Is this a FE or a BE? How about Dailinks?
--
~Vinod
>
> SectionPCM."Offload Pin 0" {
>
> Index 1
>
> Playback [
> Capabilities "Offload Pin Playback"
> Config "PCM 48k Stereo 24bit"
> Config "PCM 48k Stereo 16bit"
> ]
> }
>
> SectionPCM."Offload Pin 1" {
>
> Index 1
>
> Playback [
> Capabilities "Offload Pin Playback"
> Config "PCM 48k Stereo 24bit"
> Config "PCM 48k Stereo 16bit"
> ]
> }
>
> SectionPCM."Loopback Pin" {
>
> Index 1
>
> Capture [
> Capabilities "Loopback Capture"
> Config "PCM 48k Stereo 16bit"
> ]
> }
>
--
next prev parent reply other threads:[~2015-04-22 16:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-21 13:06 [RFC] File format for topology data Liam Girdwood
2015-04-22 15:58 ` Vinod Koul [this message]
2015-04-23 1:11 ` Liam Girdwood
2015-04-23 3:42 ` Vinod Koul
2015-04-22 18:44 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150422155816.GK2738@intel.com \
--to=vinod.koul@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=liam.r.girdwood@linux.intel.com \
--cc=mengdong.lin@intel.com \
--cc=peter.ujfalusi@ti.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.