From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Junichi Nomura <j-nomura@ce.jp.nec.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 3.19 21/27] tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one()
Date: Sun, 26 Apr 2015 16:15:52 +0200 [thread overview]
Message-ID: <20150426134604.257789946@linuxfoundation.org> (raw)
In-Reply-To: <20150426134603.371719585@linuxfoundation.org>
3.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Jun'ichi Nomura \\\\(NEC\\\\)" <j-nomura@ce.jp.nec.com>
[ Upstream commit d0af71a3573f1217b140c60b66f1a9b335fb058b ]
tg3_init_one() calls tg3_halt() without tp->lock despite its assumption
and causes deadlock.
If lockdep is enabled, a warning like this shows up before the stall:
[ BUG: bad unlock balance detected! ]
3.19.0test #3 Tainted: G E
-------------------------------------
insmod/369 is trying to release lock (&(&tp->lock)->rlock) at:
[<ffffffffa02d5a1d>] tg3_chip_reset+0x14d/0x780 [tg3]
but there are no more locks to release!
tg3_init_one() doesn't call tg3_halt() under normal situation but
during kexec kdump I hit this problem.
Fixes: 932f19de ("tg3: Release tp->lock before invoking synchronize_irq()")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/tg3.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -17868,8 +17868,10 @@ static int tg3_init_one(struct pci_dev *
*/
if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) ||
(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
+ tg3_full_lock(tp, 0);
tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+ tg3_full_unlock(tp);
}
err = tg3_test_dma(tp);
next prev parent reply other threads:[~2015-04-26 14:16 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-26 14:15 [PATCH 3.19 00/27] 3.19.6-stable review Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 01/27] tcp: prevent fetching dst twice in early demux code Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 02/27] rocker: handle non-bridge master change Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 03/27] net/mlx4_en: Call register_netdevice in the proper location Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 04/27] ipv6: Dont reduce hop limit for an interface Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 05/27] tun: return proper error code from tun_do_read Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 06/27] net: tcp6: fix double call of tcp_v6_fill_cb() Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 07/27] bonding: Bonding Overriding Configuration logic restored Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 08/27] openvswitch: Return vport module ref before destruction Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 09/27] xen-netfront: transmit fully GSO-sized packets Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 10/27] tcp: fix FRTO undo on cumulative ACK of SACKed range Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 11/27] ipv6: protect skb->sk accesses from recursive dereference inside the stack Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 12/27] net/mlx4_core: Fix error message deprecation for ConnectX-2 cards Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 13/27] tcp: tcp_make_synack() should clear skb->tstamp Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 14/27] bnx2x: Fix busy_poll vs netpoll Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 15/27] bpf: fix verifier memory corruption Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 16/27] Revert "net: Reset secmark when scrubbing packet" Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 18/27] udptunnels: Call handle_offloads after inserting vlan tag Greg Kroah-Hartman
2015-04-26 14:15 ` Greg Kroah-Hartman [this message]
2015-04-26 14:15 ` [PATCH 3.19 23/27] staging: comedi: adv_pci1710: fix AI INSN_READ for non-zero channel Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 24/27] mm/hugetlb: reduce arch dependent code around follow_huge_* Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 25/27] mm/hugetlb: take page table lock in follow_huge_pmd() Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 26/27] rtlwifi: rtl8192ee: Fix handling of new style descriptors Greg Kroah-Hartman
2015-04-26 14:15 ` [PATCH 3.19 27/27] fs: take i_mutex during prepare_binprm for set[ug]id executables Greg Kroah-Hartman
2015-04-26 20:04 ` [PATCH 3.19 00/27] 3.19.6-stable review Guenter Roeck
2015-04-27 17:20 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150426134604.257789946@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=j-nomura@ce.jp.nec.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.