From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Chandra Konduru <chandra.konduru@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v9] drm/i915/skl: Add support for SKL background color
Date: Mon, 27 Apr 2015 18:28:09 +0300 [thread overview]
Message-ID: <20150427152809.GE18908@intel.com> (raw)
In-Reply-To: <1424477494-23472-1-git-send-email-chandra.konduru@intel.com>
On Fri, Feb 20, 2015 at 04:11:33PM -0800, Chandra Konduru wrote:
> This patch adds support for Skylake display pipe background color.
>
> v2:
> - added property documentation to drm DocBook (Daniel Vetter)
> - moved property to drm_mode_config (Daniel Vetter)
> - change to set property to NULL once it is freed. (me)
> - change to make sure gamma/csc settings were retained during color change (me)
> - change to make sure background color is restored after a power event (me)
>
> v3:
> - change to add gen check before writing background color (Matt Roper)
>
> v4:
> - change to increase color from 8bpc to 16bpc (Daniel Vetter)
>
> v5:
> - removed initialization of background color to 0 (Damien Lespiau)
> - added change log to commit message (Damien Lespiau)
>
> v6:
> - optmization to use _PIPE() (Damien Lespiau)
> - updated max limit value in DocBook (Damien Lespiau)
> - simplied color conversion equation (Damien Lespiau)
> - always enable gamma and csc to align with update plane (Damien Lespiau)
> - move resume restoration code to haswell_crtc_enable (Damien Lespiau)
>
> v7:
> - remove superfluous comments (Damien)
> - remove unused variables left over between v5 and v6 (Damien)
>
> v8:
> - remove the destruction of the property, DRM core does that for us (Damien)
>
> v9:
> - add ULL to a 64bits constant
>
> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
> Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
> ---
> Documentation/DocBook/drm.tmpl | 10 ++++++-
> drivers/gpu/drm/i915/i915_reg.h | 10 +++++++
> drivers/gpu/drm/i915/intel_display.c | 54 ++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_drv.h | 2 ++
> include/drm/drm_crtc.h | 3 ++
> 5 files changed, 78 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
> index 249f0c9..c83ffe6 100644
> --- a/Documentation/DocBook/drm.tmpl
> +++ b/Documentation/DocBook/drm.tmpl
> @@ -2834,7 +2834,7 @@ void intel_crt_init(struct drm_device *dev)
> <td valign="top" >TBD</td>
> </tr>
> <tr>
> - <td rowspan="21" valign="top" >i915</td>
> + <td rowspan="22" valign="top" >i915</td>
> <td rowspan="2" valign="top" >Generic</td>
> <td valign="top" >"Broadcast RGB"</td>
> <td valign="top" >ENUM</td>
> @@ -2858,6 +2858,14 @@ void intel_crt_init(struct drm_device *dev)
> <td valign="top" >TBD</td>
> </tr>
> <tr>
> + <td rowspan="1" valign="top" >CRTC</td>
> + <td valign="top" >“background_color”</td>
> + <td valign="top" >Range</td>
> + <td valign="top" >Min=0, Max=0xFFFFFFFFFFFF</td>
> + <td valign="top" >CRTC</td>
> + <td valign="top" >Background color in 16bpc BGR (B-MSB, R-LSB)</td>
I'd prefer to settle on ARGB msb->lsb layout, unless there's already
precedent for something else. I think it's the most common component
order around, and so should result in least amount of code to stuff
the bits into the hardware registers.
> + </tr>
> + <tr>
> <td rowspan="17" valign="top" >SDVO-TV</td>
> <td valign="top" >“mode”</td>
> <td valign="top" >ENUM</td>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 040cd83..2d7a9f5 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6758,6 +6758,16 @@ enum skl_disp_power_wells {
> #define PIPE_CSC_POSTOFF_ME(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_ME, _PIPE_B_CSC_POSTOFF_ME)
> #define PIPE_CSC_POSTOFF_LO(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_LO, _PIPE_B_CSC_POSTOFF_LO)
>
> +/* Skylake pipe bottom color */
> +#define _PIPE_BOTTOM_COLOR_A 0x70034
> +#define _PIPE_BOTTOM_COLOR_B 0x71034
> +#define _PIPE_BOTTOM_COLOR_C 0x72034
> +#define PIPE_BOTTOM_GAMMA_ENABLE (1 << 31)
> +#define PIPE_BOTTOM_CSC_ENABLE (1 << 30)
> +#define PIPE_BOTTOM_COLOR_MASK 0x3FFFFFFF
> +#define PIPE_BOTTOM_COLOR(pipe) \
> + _PIPE(pipe, _PIPE_BOTTOM_COLOR_A, _PIPE_BOTTOM_COLOR_B)
> +
> /* MIPI DSI registers */
>
> #define _MIPI_PORT(port, a, c) _PORT3(port, a, 0, c) /* ports A and C only */
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 3b0fe9f..4dc5cb2 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4413,6 +4413,20 @@ static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
> intel_wait_for_vblank(dev, other_active_crtc->pipe);
> }
>
> +static void skl_crtc_set_background_color(struct intel_crtc *intel_crtc)
> +{
> + struct drm_device *dev = intel_crtc->base.dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + if (INTEL_INFO(dev)->gen < 9)
> + return;
> +
> + I915_WRITE(PIPE_BOTTOM_COLOR(intel_crtc->pipe),
> + intel_crtc->background_color |
> + PIPE_BOTTOM_GAMMA_ENABLE |
> + PIPE_BOTTOM_CSC_ENABLE);
> +}
> +
> static void haswell_crtc_enable(struct drm_crtc *crtc)
> {
> struct drm_device *dev = crtc->dev;
> @@ -4474,6 +4488,8 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
> */
> intel_crtc_load_lut(crtc);
>
> + skl_crtc_set_background_color(intel_crtc);
> +
> intel_ddi_set_pipe_settings(crtc);
> intel_ddi_enable_transcoder_func(crtc);
>
> @@ -9882,6 +9898,30 @@ out_hang:
> return ret;
> }
>
> +static int intel_crtc_set_property(struct drm_crtc *crtc,
> + struct drm_property *property, uint64_t val)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + int i;
> +
> + if (INTEL_INFO(dev)->gen >= 9) {
> + if (property == dev->mode_config.background_color_property) {
> + uint64_t bottom = 0;
> +
> + /* BGR 16bpc ==> RGB 10bpc */
> + for (i = 0; i < 3; i++)
> + bottom |= (((val >> (i * 16 + 6)) & 0x3FF) << ((2 - i) * 10));
> +
> + intel_crtc->background_color = (uint32_t) bottom;
> +
> + skl_crtc_set_background_color(intel_crtc);
> + }
> + return 0;
> + }
> + return -EINVAL;
> +}
> +
> static struct drm_crtc_helper_funcs intel_helper_funcs = {
> .mode_set_base_atomic = intel_pipe_set_base_atomic,
> .load_lut = intel_crtc_load_lut,
> @@ -11660,6 +11700,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
> .page_flip = intel_crtc_page_flip,
> .atomic_duplicate_state = intel_crtc_duplicate_state,
> .atomic_destroy_state = intel_crtc_destroy_state,
> + .set_property = intel_crtc_set_property,
> };
>
> static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
> @@ -12341,6 +12382,19 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
> drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
>
> WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
> +
> + /* background color = 48 bit quantity: MSB BGR 16bpc LSB */
> + if (INTEL_INFO(dev)->gen >= 9 &&
> + !dev->mode_config.background_color_property)
> + dev->mode_config.background_color_property =
> + drm_property_create_range(dev, 0, "background_color", 0,
> + 0xFFFFFFFFFFFFULL);
> +
> + if (dev->mode_config.background_color_property)
> + drm_object_attach_property(&intel_crtc->base.base,
> + dev->mode_config.background_color_property,
> + intel_crtc->background_color);
> +
> return;
>
> fail:
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 1de8e20..285f908 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -493,6 +493,8 @@ struct intel_crtc {
> struct intel_mmio_flip mmio_flip;
>
> struct intel_crtc_atomic_commit atomic;
> +
> + uint32_t background_color;
> };
>
> struct intel_plane_wm_parameters {
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index b1465d6..5f8c80a 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1122,6 +1122,9 @@ struct drm_mode_config {
> struct drm_property *prop_crtc_id;
> struct drm_property *prop_active;
>
> + /* crtc properties */
> + struct drm_property *background_color_property;
> +
> /* DVI-I properties */
> struct drm_property *dvi_i_subconnector_property;
> struct drm_property *dvi_i_select_subconnector_property;
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-04-27 15:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-21 0:11 [PATCH v9] drm/i915/skl: Add support for SKL background color Chandra Konduru
2015-02-24 0:10 ` Daniel Vetter
2015-04-27 15:28 ` Ville Syrjälä [this message]
2015-04-27 20:33 ` Konduru, Chandra
2015-05-04 7:57 ` Daniel Vetter
2015-05-05 14:33 ` Ville Syrjälä
2015-05-06 8:57 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150427152809.GE18908@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=chandra.konduru@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.