Re: [PATCHv3 00/12] usb: ulpi bus

[Heikki Krogerus <heikki.krogerus@linux.intel.com>]

On Tue, Apr 28, 2015 at 12:17:34PM -0500, Felipe Balbi wrote:
> Hi,
> 
> On Tue, Apr 28, 2015 at 04:24:35PM +0300, Heikki Krogerus wrote:
> > Hi,
> > 
> > I took the liberty of adding David's ACK to everything except 9/12, including to
> > the 1/12 (removing the module handling has no functional affect).
> > 
> > Changes since v2:
> > - remove module handling from the bus driver as suggested by Paul Bolle.
> > - reordered the gpio requests in BYT quirk as suggested by David Cohen.
> > 
> > Major changes since v1:
> > - calling dwc3_phy_setup earlier and registering the ULPI interface there.
> > - new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as
> >   suggested by Felipe
> > - dwc3 soft reset before registration of the ULPI interface to sync the clocks
> >   as suggested by David
> > - Including support for the BYT boards that have the GPIOs controlling the reset
> >   and cs signals.
> > 
> > Heikki Krogerus (12):
> >   usb: add bus type for USB ULPI
> >   usb: dwc3: USB2 PHY register access bits
> >   usb: dwc3: ULPI or UTMI+ select
> >   usb: dwc3: store driver data earlier
> >   usb: dwc3: cache hwparams earlier
> >   usb: dwc3: soft reset to it's own function
> >   usb: dwc3: setup phys earlier
> 
> up to patch 7/12, I've applied to my testing/next. I'll wait for a
> revised 8/12 before applying the rest.

OK. I'll re-send the patches 8-12/12 here with the revised version of
8/12 and the missing 10/12 (usb: dwc3: add ULPI interface support).


Thanks,

-- 
heikki