From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: Sergej Sawazki <ce3a@gmx.de>
Cc: alsa-devel@alsa-project.org, broonie@kernel.org,
lgirdwood@gmail.com, lars@metafoo.de,
patches@opensource.wolfsonmicro.com
Subject: Re: [RFC PATCH] ASoC: wm8741: Add differential mono mode support
Date: Mon, 4 May 2015 09:02:58 +0100 [thread overview]
Message-ID: <20150504080258.GV3480@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1430504037-7170-1-git-send-email-ce3a@gmx.de>
On Fri, May 01, 2015 at 08:13:57PM +0200, Sergej Sawazki wrote:
> The WM8741 DAC supports several differential output modes (stereo,
> stereo reversed, mono left, mono right). Add platform data and DT
> bindings to configure it.
>
> Signed-off-by: Sergej Sawazki <ce3a@gmx.de>
> ---
> Documentation/devicetree/bindings/sound/wm8741.txt | 11 ++
> sound/soc/codecs/wm8741.c | 129 ++++++++++++++++++---
> sound/soc/codecs/wm8741.h | 10 ++
> 3 files changed, 137 insertions(+), 13 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/wm8741.txt b/Documentation/devicetree/bindings/sound/wm8741.txt
> index 74bda58..a133154 100644
> --- a/Documentation/devicetree/bindings/sound/wm8741.txt
> +++ b/Documentation/devicetree/bindings/sound/wm8741.txt
> @@ -10,9 +10,20 @@ Required properties:
> - reg : the I2C address of the device for I2C, the chip select
> number for SPI.
>
> +Optional properties:
> +
> + - diff-mode: Differential output mode configuration. Default value for field
> + DIFF in register R8 (MODE_CONTROL_2). If absent, the default is 0, shall be:
> + 0 = stereo
> + 1 = mono left
> + 2 = stereo reversed
> + 3 = mono right
> +
> Example:
>
> codec: wm8741@1a {
> compatible = "wlf,wm8741";
> reg = <0x1a>;
> +
> + diff-mode = <3>;
> };
> diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c
> index 9e71c76..9b777a6 100644
> --- a/sound/soc/codecs/wm8741.c
> +++ b/sound/soc/codecs/wm8741.c
> @@ -41,6 +41,7 @@ static const char *wm8741_supply_names[WM8741_NUM_SUPPLIES] = {
>
> /* codec private data */
> struct wm8741_priv {
> + struct wm8741_platform_data pdata;
> struct regmap *regmap;
> struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES];
> unsigned int sysclk;
> @@ -87,13 +88,27 @@ static int wm8741_reset(struct snd_soc_codec *codec)
> static const DECLARE_TLV_DB_SCALE(dac_tlv_fine, -12700, 13, 0);
> static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 400, 0);
>
> -static const struct snd_kcontrol_new wm8741_snd_controls[] = {
> +static const struct snd_kcontrol_new wm8741_snd_controls_stereo[] = {
> SOC_DOUBLE_R_TLV("Fine Playback Volume", WM8741_DACLLSB_ATTENUATION,
> WM8741_DACRLSB_ATTENUATION, 1, 255, 1, dac_tlv_fine),
> SOC_DOUBLE_R_TLV("Playback Volume", WM8741_DACLMSB_ATTENUATION,
> WM8741_DACRMSB_ATTENUATION, 0, 511, 1, dac_tlv),
> };
>
> +static const struct snd_kcontrol_new wm8741_snd_controls_mono_left[] = {
> +SOC_SINGLE_TLV("Fine Playback Volume Left", WM8741_DACLLSB_ATTENUATION,
> + 1, 255, 1, dac_tlv_fine),
> +SOC_SINGLE_TLV("Playback Volume Left", WM8741_DACLMSB_ATTENUATION,
> + 0, 511, 1, dac_tlv),
> +};
> +
> +static const struct snd_kcontrol_new wm8741_snd_controls_mono_right[] = {
> + SOC_SINGLE_TLV("Fine Playback Volume Right", WM8741_DACRLSB_ATTENUATION,
> + 1, 255, 1, dac_tlv_fine),
> + SOC_SINGLE_TLV("Playback Volume Right", WM8741_DACRMSB_ATTENUATION,
> + 0, 511, 1, dac_tlv),
> +};
> +
Tabbing here could use being fixed, but functionally the change
looks fine to me.
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Thanks,
Charles
next prev parent reply other threads:[~2015-05-04 8:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-01 18:13 [RFC PATCH] ASoC: wm8741: Add differential mono mode support Sergej Sawazki
2015-05-04 8:02 ` Charles Keepax [this message]
2015-05-04 11:25 ` Mark Brown
2015-05-04 19:03 ` Sergej Sawazki
2015-05-05 11:22 ` Mark Brown
2015-05-05 12:19 ` Sergej Sawazki
2015-05-05 13:57 ` Mark Brown
2015-05-05 14:07 ` Sergej Sawazki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150504080258.GV3480@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ce3a@gmx.de \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.