All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Jones <davej@codemonkey.org.uk>
To: dri-devel@lists.freedesktop.org
Cc: "Alex Deucher" <alexander.deucher@amd.com>,
	"Christian König" <christian.koenig@amd.com>
Subject: Radeon Verde displayport failure.
Date: Thu, 7 May 2015 19:47:43 -0400	[thread overview]
Message-ID: <20150507234743.GA1467@codemonkey.org.uk> (raw)

I just bought a new radeon (1002:682c), to pair with my shiny new displayport monitor.
It shows a display during through the BIOS POST, and grub, but when the kernel
starts up, it's a coin toss whether or not I get anything.
Sometimes it just goes straight into power saving.

When I do get something on the console, it continues to boot and then X starts up and
puts it into power saving too. Trying to flip back to tty1 doesn't light up the display again.

I'm running On debian stable, with copied-by-hand verde_* firmware files from the linux-firmware git tree.
Here's a log from the 4.0-rc2 kernel.

Any other info I can provide ?

	Dave



[drm] register mmio base: 0xFBE00000
[drm] register mmio size: 262144
radeon 0000:01:00.0: Invalid ROM contents
ATOM BIOS: C755
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 16400232 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading verde Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:2f08 = 77a3103/e
input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input4
input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input5
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 8086:2f08 = 77a3103/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880807d0ac00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880807d0ac04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880807d0ac08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880807d0ac0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880807d0ac10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001035a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 9 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DP-1
[drm]   HPD4
[drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   DP-2
[drm]   HPD5
[drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm]   DP-3
[drm]   HPD1
[drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm]   Encoders:
[drm]     DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm]   DP-4
[drm]   HPD2
[drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm]   Encoders:
[drm]     DFP4: INTERNAL_UNIPHY
[drm:si_dpm_set_power_state [radeon]] *ERROR* si_enable_smc_cac failed
[drm] fb mappable at 0xD047A000
[drm] vram apper at 0xD0000000
[drm] size 3145728
[drm] fb depth is 24
[drm]    pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
[drm:si_dpm_set_power_state [radeon]] *ERROR* si_enable_smc_cac failed
[drm:radeon_dp_link_train [radeon]] *ERROR* displayport link status failed
[drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed
Console: switching to colour frame buffer device 128x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
[drm:radeon_dp_link_train [radeon]] *ERROR* displayport link status failed
[drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2015-05-08  0:41 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-07 23:47 Dave Jones [this message]
2015-05-08 13:23 ` Radeon Verde displayport failure Deucher, Alexander
2015-05-08 15:40   ` Dave Jones
2015-05-11 18:40     ` Dave Jones
2015-05-11 19:59       ` Alex Deucher
2015-05-11 23:33         ` Dave Jones
2015-05-12 22:38         ` Dave Jones
2015-05-13  0:04         ` Dave Jones
2015-05-14 13:49           ` Alex Deucher
2015-05-14 15:09             ` Dave Jones
2015-05-15  3:52             ` Dave Jones
2015-05-15  9:16               ` Michel Dänzer
2015-05-15 12:44                 ` Dave Jones
2015-05-20 22:03               ` Alex Deucher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150507234743.GA1467@codemonkey.org.uk \
    --to=davej@codemonkey.org.uk \
    --cc=alexander.deucher@amd.com \
    --cc=christian.koenig@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.