diff for duplicates of <20150511235148.GC4810@localhost.localdomain> diff --git a/a/1.txt b/N1/1.txt index c78db58..4c62425 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -21,7 +21,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > }; > }; > -> - i2s0: i2s@03830000 { +> - i2s0: i2s at 03830000 { > - pinctrl-0 = <&i2s0_bus>; > - pinctrl-names = "default"; > - status = "okay"; @@ -38,7 +38,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > reset-gpios = <&gpk1 2 1>; > }; > -> - mmc@12550000 { +> - mmc at 12550000 { > - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; > - pinctrl-names = "default"; > - vmmc-supply = <&ldo20_reg &buck8_reg>; @@ -55,17 +55,17 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > - cap-mmc-highspeed; > - }; > - -> - watchdog@10060000 { +> - watchdog at 10060000 { > - status = "okay"; > - }; > - -> - rtc@10070000 { +> - rtc at 10070000 { > - status = "okay"; > - clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; > - clock-names = "rtc", "rtc_src"; > - }; > - -> - g2d@10800000 { +> - g2d at 10800000 { > - status = "okay"; > - }; > - @@ -75,7 +75,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > pinctrl-0 = <>; > + }; > -> - fimc_0: fimc@11800000 { +> - fimc_0: fimc at 11800000 { > - status = "okay"; > - assigned-clocks = <&clock CLK_MOUT_FIMC0>, > - <&clock CLK_SCLK_FIMC0>; @@ -83,7 +83,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > - assigned-clock-rates = <0>, <176000000>; > - }; > - -> - fimc_1: fimc@11810000 { +> - fimc_1: fimc at 11810000 { > - status = "okay"; > - assigned-clocks = <&clock CLK_MOUT_FIMC1>, > - <&clock CLK_SCLK_FIMC1>; @@ -95,7 +95,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + clock-frequency = <0>; > }; > -> - fimc_2: fimc@11820000 { +> - fimc_2: fimc at 11820000 { > - status = "okay"; > - assigned-clocks = <&clock CLK_MOUT_FIMC2>, > - <&clock CLK_SCLK_FIMC2>; @@ -107,7 +107,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > }; > + }; > -> - fimc_3: fimc@11830000 { +> - fimc_3: fimc at 11830000 { > - status = "okay"; > - assigned-clocks = <&clock CLK_MOUT_FIMC3>, > - <&clock CLK_SCLK_FIMC3>; @@ -129,7 +129,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > }; > +}; > -> - sdhci@12530000 { +> - sdhci at 12530000 { > - bus-width = <4>; > - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; > - pinctrl-names = "default"; @@ -144,7 +144,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + samsung,pin-drv = <0>; > +}; > -> - serial@13800000 { +> - serial at 13800000 { > - status = "okay"; > +&pinctrl_1 { > + gpio_power_key: power_key { @@ -152,7 +152,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + samsung,pin-pud = <0>; > }; > -> - serial@13810000 { +> - serial at 13810000 { > - status = "okay"; > + max77686_irq: max77686-irq { > + samsung,pins = "gpx3-2"; @@ -177,7 +177,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > }; > +}; > -> - i2c@13860000 { +> - i2c at 13860000 { > - pinctrl-0 = <&i2c0_bus>; > - pinctrl-names = "default"; > - samsung,i2c-sda-delay = <100>; @@ -187,7 +187,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + status = "okay"; > +}; > -> - usb3503: usb3503@08 { +> - usb3503: usb3503 at 08 { > - compatible = "smsc,usb3503"; > - reg = <0x08>; > +&exynos_usbphy { @@ -207,7 +207,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + assigned-clock-rates = <0>, <176000000>; > +}; > -> - max77686: pmic@09 { +> - max77686: pmic at 09 { > - compatible = "maxim,max77686"; > - interrupt-parent = <&gpx3>; > - interrupts = <2 0>; @@ -314,7 +314,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + samsung,i2c-max-bus-freq = <400000>; > + status = "okay"; > + -> + usb3503: usb3503@08 { +> + usb3503: usb3503 at 08 { > + compatible = "smsc,usb3503"; > + reg = <0x08>; > + @@ -324,13 +324,13 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + initial-mode = <1>; > + }; > -> - ldo8_reg: ldo@8 { +> - ldo8_reg: ldo at 8 { > - regulator-compatible = "LDO8"; > - regulator-name = "VDD10_HDMI_1.0V"; > - regulator-min-microvolt = <1000000>; > - regulator-max-microvolt = <1000000>; > - }; -> + max77686: pmic@09 { +> + max77686: pmic at 09 { > + compatible = "maxim,max77686"; > + interrupt-parent = <&gpx3>; > + interrupts = <2 0>; @@ -347,7 +347,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + regulator-always-on; > + }; > -> - ldo10_reg: ldo@10 { +> - ldo10_reg: ldo at 10 { > - regulator-compatible = "LDO10"; > - regulator-name = "VDDQ_MIPIHSI_1.8V"; > - regulator-min-microvolt = <1800000>; @@ -438,7 +438,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > - regulator-always-on; > - regulator-boot-on; > - }; -> + ldo8_reg: ldo@8 { +> + ldo8_reg: ldo at 8 { > + regulator-compatible = "LDO8"; > + regulator-name = "VDD10_HDMI_1.0V"; > + regulator-min-microvolt = <1000000>; @@ -451,7 +451,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > - regulator-max-microvolt = <1800000>; > - regulator-boot-on; > - }; -> + ldo10_reg: ldo@10 { +> + ldo10_reg: ldo at 10 { > + regulator-compatible = "LDO10"; > + regulator-name = "VDDQ_MIPIHSI_1.8V"; > + regulator-min-microvolt = <1800000>; @@ -604,11 +604,11 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > - }; > - }; > -> - i2c@13870000 { +> - i2c at 13870000 { > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c1_bus>; > - status = "okay"; -> - max98090: max98090@10 { +> - max98090: max98090 at 10 { > - compatible = "maxim,max98090"; > - reg = <0x10>; > - interrupt-parent = <&gpx0>; @@ -626,7 +626,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + regulator-boot-on; > + }; > -> - exynos-usbphy@125B0000 { +> - exynos-usbphy at 125B0000 { > - status = "okay"; > - }; > + buck3_reg: BUCK3 { @@ -637,7 +637,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + regulator-boot-on; > + }; > -> - hsotg@12480000 { +> - hsotg at 12480000 { > - dr_mode = "peripheral"; > - status = "okay"; > - vusb_d-supply = <&ldo15_reg>; @@ -650,7 +650,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + regulator-microvolt-offset = <50000>; > + }; > -> - ehci: ehci@12580000 { +> - ehci: ehci at 12580000 { > - status = "okay"; > - }; > + buck5_reg: BUCK5 { @@ -661,7 +661,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + regulator-boot-on; > + }; > -> - tmu@100C0000 { +> - tmu at 100C0000 { > - vtmu-supply = <&ldo10_reg>; > - status = "okay"; > - }; @@ -701,13 +701,13 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > }; > +}; > -> - mixer: mixer@12C10000 { +> - mixer: mixer at 12C10000 { > - status = "okay"; > +&i2c_1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_bus>; > + status = "okay"; -> + max98090: max98090@10 { +> + max98090: max98090 at 10 { > + compatible = "maxim,max98090"; > + reg = <0x10>; > + interrupt-parent = <&gpx0>; @@ -718,7 +718,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > }; > +}; > -> - hdmi@12D00000 { +> - hdmi at 12D00000 { > - hpd-gpio = <&gpx3 7 0>; > - pinctrl-names = "default"; > - pinctrl-0 = <&hdmi_hpd>; @@ -734,7 +734,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + pinctrl-0 = <&i2c2_bus>; > +}; > -> - hdmi_ddc: i2c@13880000 { +> - hdmi_ddc: i2c at 13880000 { > - status = "okay"; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c2_bus>; @@ -743,7 +743,7 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > + status = "okay"; > +}; > -> - i2c@138E0000 { +> - i2c at 138E0000 { > - status = "okay"; > - }; > +&i2s0 { @@ -836,11 +836,11 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > }; > }; > -> - serial@13820000 { +> - serial at 13820000 { > - status = "okay"; > - }; > - -> - serial@13830000 { +> - serial at 13830000 { > - status = "okay"; > - }; > - @@ -864,6 +864,13 @@ Acked-by: Eduardo Valentin <edubezval@gmail.com> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in -> the body of a message to majordomo@vger.kernel.org +> the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ +-------------- next part -------------- +A non-text attachment was scrubbed... +Name: signature.asc +Type: application/pgp-signature +Size: 490 bytes +Desc: Digital signature +URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150511/35e4b26d/attachment.sig> diff --git a/a/2.bin b/a/2.bin deleted file mode 100644 index f6df6a6..0000000 --- a/a/2.bin +++ /dev/null @@ -1,11 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.4.12 (GNU/Linux) - -iQEcBAEBAgAGBQJVUUCNAAoJEMLUO4d9pOJWDeIH/2gicPo6BhXXaKNKQ4/e4rGE -M6FnYsu5qoPkW3QgnjJT4kb8Nr8s/lyB1YvOcTfDDZzpqrteO3HhDxxrs90yps6b -OZnbJ+D9F3sqtnUZF63clSSxWIwzNt4/jvcf0fBwyjrjSC1bkXcdoKsVz1Tlgqe8 -GE5FaAVigJ3cyC9a0b/IiG2lagcM0KzcG3T+hJ3jeGQG4pzFWRa2QJex71X+yfw0 -ETn297pmddc4IS5Z5F1ll5Aq0rJl72JfA/xjPcaZCuAXf0Nlfx0f41LQsptXgYqo -nWwrtFXmaETg5LbNreEV00mkHmtwXA+ep4p8BH5pM0O+4i0SnYvC3YahOnXEfGg= -=9GhN ------END PGP SIGNATURE----- diff --git a/a/2.hdr b/a/2.hdr deleted file mode 100644 index 3237378..0000000 --- a/a/2.hdr +++ /dev/null @@ -1,2 +0,0 @@ -Content-Type: application/pgp-signature; name="signature.asc" -Content-Description: Digital signature diff --git a/a/content_digest b/N1/content_digest index 71328c0..7b57d7d 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,15 +1,10 @@ "ref\01431351773-2031-1-git-send-email-k.kozlowski.k@gmail.com\0" "ref\01431351773-2031-10-git-send-email-k.kozlowski.k@gmail.com\0" - "From\0Eduardo Valentin <edubezval@gmail.com>\0" - "Subject\0Re: [PATCH v4 09/13] ARM: dts: exynos4: Use labels for overriding nodes in Odroid\0" + "From\0edubezval@gmail.com (Eduardo Valentin)\0" + "Subject\0[PATCH v4 09/13] ARM: dts: exynos4: Use labels for overriding nodes in Odroid\0" "Date\0Mon, 11 May 2015 16:51:49 -0700\0" - "To\0Krzysztof Kozlowski <k.kozlowski.k@gmail.com>\0" - "Cc\0Kukjin Kim <kgene@kernel.org>" - devicetree@vger.kernel.org - linux-arm-kernel@lists.infradead.org - linux-samsung-soc@vger.kernel.org - " linux-kernel@vger.kernel.org\0" - "\01:1\0" + "To\0linux-arm-kernel@lists.infradead.org\0" + "\00:1\0" "b\0" "On Mon, May 11, 2015 at 10:42:49PM +0900, Krzysztof Kozlowski wrote:\n" "> Usage of labels instead of full paths reduces possible mistakes when\n" @@ -34,7 +29,7 @@ "> \t\t};\n" "> \t};\n" "> \n" - "> -\ti2s0: i2s@03830000 {\n" + "> -\ti2s0: i2s at 03830000 {\n" "> -\t\tpinctrl-0 = <&i2s0_bus>;\n" "> -\t\tpinctrl-names = \"default\";\n" "> -\t\tstatus = \"okay\";\n" @@ -51,7 +46,7 @@ "> \t\treset-gpios = <&gpk1 2 1>;\n" "> \t};\n" "> \n" - "> -\tmmc@12550000 {\n" + "> -\tmmc at 12550000 {\n" "> -\t\tpinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;\n" "> -\t\tpinctrl-names = \"default\";\n" "> -\t\tvmmc-supply = <&ldo20_reg &buck8_reg>;\n" @@ -68,17 +63,17 @@ "> -\t\tcap-mmc-highspeed;\n" "> -\t};\n" "> -\n" - "> -\twatchdog@10060000 {\n" + "> -\twatchdog at 10060000 {\n" "> -\t\tstatus = \"okay\";\n" "> -\t};\n" "> -\n" - "> -\trtc@10070000 {\n" + "> -\trtc at 10070000 {\n" "> -\t\tstatus = \"okay\";\n" "> -\t\tclocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;\n" "> -\t\tclock-names = \"rtc\", \"rtc_src\";\n" "> -\t};\n" "> -\n" - "> -\tg2d@10800000 {\n" + "> -\tg2d at 10800000 {\n" "> -\t\tstatus = \"okay\";\n" "> -\t};\n" "> -\n" @@ -88,7 +83,7 @@ "> \t\tpinctrl-0 = <>;\n" "> +\t};\n" "> \n" - "> -\t\tfimc_0: fimc@11800000 {\n" + "> -\t\tfimc_0: fimc at 11800000 {\n" "> -\t\t\tstatus = \"okay\";\n" "> -\t\t\tassigned-clocks = <&clock CLK_MOUT_FIMC0>,\n" "> -\t\t\t\t\t<&clock CLK_SCLK_FIMC0>;\n" @@ -96,7 +91,7 @@ "> -\t\t\tassigned-clock-rates = <0>, <176000000>;\n" "> -\t\t};\n" "> -\n" - "> -\t\tfimc_1: fimc@11810000 {\n" + "> -\t\tfimc_1: fimc at 11810000 {\n" "> -\t\t\tstatus = \"okay\";\n" "> -\t\t\tassigned-clocks = <&clock CLK_MOUT_FIMC1>,\n" "> -\t\t\t\t\t<&clock CLK_SCLK_FIMC1>;\n" @@ -108,7 +103,7 @@ "> +\t\t\tclock-frequency = <0>;\n" "> \t\t};\n" "> \n" - "> -\t\tfimc_2: fimc@11820000 {\n" + "> -\t\tfimc_2: fimc at 11820000 {\n" "> -\t\t\tstatus = \"okay\";\n" "> -\t\t\tassigned-clocks = <&clock CLK_MOUT_FIMC2>,\n" "> -\t\t\t\t\t<&clock CLK_SCLK_FIMC2>;\n" @@ -120,7 +115,7 @@ "> \t\t};\n" "> +\t};\n" "> \n" - "> -\t\tfimc_3: fimc@11830000 {\n" + "> -\t\tfimc_3: fimc at 11830000 {\n" "> -\t\t\tstatus = \"okay\";\n" "> -\t\t\tassigned-clocks = <&clock CLK_MOUT_FIMC3>,\n" "> -\t\t\t\t\t<&clock CLK_SCLK_FIMC3>;\n" @@ -142,7 +137,7 @@ "> \t};\n" "> +};\n" "> \n" - "> -\tsdhci@12530000 {\n" + "> -\tsdhci at 12530000 {\n" "> -\t\tbus-width = <4>;\n" "> -\t\tpinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;\n" "> -\t\tpinctrl-names = \"default\";\n" @@ -157,7 +152,7 @@ "> +\tsamsung,pin-drv = <0>;\n" "> +};\n" "> \n" - "> -\tserial@13800000 {\n" + "> -\tserial at 13800000 {\n" "> -\t\tstatus = \"okay\";\n" "> +&pinctrl_1 {\n" "> +\tgpio_power_key: power_key {\n" @@ -165,7 +160,7 @@ "> +\t\tsamsung,pin-pud = <0>;\n" "> \t};\n" "> \n" - "> -\tserial@13810000 {\n" + "> -\tserial at 13810000 {\n" "> -\t\tstatus = \"okay\";\n" "> +\tmax77686_irq: max77686-irq {\n" "> +\t\tsamsung,pins = \"gpx3-2\";\n" @@ -190,7 +185,7 @@ "> \t};\n" "> +};\n" "> \n" - "> -\ti2c@13860000 {\n" + "> -\ti2c at 13860000 {\n" "> -\t\tpinctrl-0 = <&i2c0_bus>;\n" "> -\t\tpinctrl-names = \"default\";\n" "> -\t\tsamsung,i2c-sda-delay = <100>;\n" @@ -200,7 +195,7 @@ "> +\tstatus = \"okay\";\n" "> +};\n" "> \n" - "> -\t\tusb3503: usb3503@08 {\n" + "> -\t\tusb3503: usb3503 at 08 {\n" "> -\t\t\tcompatible = \"smsc,usb3503\";\n" "> -\t\t\treg = <0x08>;\n" "> +&exynos_usbphy {\n" @@ -220,7 +215,7 @@ "> +\tassigned-clock-rates = <0>, <176000000>;\n" "> +};\n" "> \n" - "> -\t\tmax77686: pmic@09 {\n" + "> -\t\tmax77686: pmic at 09 {\n" "> -\t\t\tcompatible = \"maxim,max77686\";\n" "> -\t\t\tinterrupt-parent = <&gpx3>;\n" "> -\t\t\tinterrupts = <2 0>;\n" @@ -327,7 +322,7 @@ "> +\tsamsung,i2c-max-bus-freq = <400000>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tusb3503: usb3503@08 {\n" + "> +\tusb3503: usb3503 at 08 {\n" "> +\t\tcompatible = \"smsc,usb3503\";\n" "> +\t\treg = <0x08>;\n" "> +\n" @@ -337,13 +332,13 @@ "> +\t\tinitial-mode = <1>;\n" "> +\t};\n" "> \n" - "> -\t\t\t\tldo8_reg: ldo@8 {\n" + "> -\t\t\t\tldo8_reg: ldo at 8 {\n" "> -\t\t\t\t\tregulator-compatible = \"LDO8\";\n" "> -\t\t\t\t\tregulator-name = \"VDD10_HDMI_1.0V\";\n" "> -\t\t\t\t\tregulator-min-microvolt = <1000000>;\n" "> -\t\t\t\t\tregulator-max-microvolt = <1000000>;\n" "> -\t\t\t\t};\n" - "> +\tmax77686: pmic@09 {\n" + "> +\tmax77686: pmic at 09 {\n" "> +\t\tcompatible = \"maxim,max77686\";\n" "> +\t\tinterrupt-parent = <&gpx3>;\n" "> +\t\tinterrupts = <2 0>;\n" @@ -360,7 +355,7 @@ "> +\t\t\t\tregulator-always-on;\n" "> +\t\t\t};\n" "> \n" - "> -\t\t\t\tldo10_reg: ldo@10 {\n" + "> -\t\t\t\tldo10_reg: ldo at 10 {\n" "> -\t\t\t\t\tregulator-compatible = \"LDO10\";\n" "> -\t\t\t\t\tregulator-name = \"VDDQ_MIPIHSI_1.8V\";\n" "> -\t\t\t\t\tregulator-min-microvolt = <1800000>;\n" @@ -451,7 +446,7 @@ "> -\t\t\t\t\tregulator-always-on;\n" "> -\t\t\t\t\tregulator-boot-on;\n" "> -\t\t\t\t};\n" - "> +\t\t\tldo8_reg: ldo@8 {\n" + "> +\t\t\tldo8_reg: ldo at 8 {\n" "> +\t\t\t\tregulator-compatible = \"LDO8\";\n" "> +\t\t\t\tregulator-name = \"VDD10_HDMI_1.0V\";\n" "> +\t\t\t\tregulator-min-microvolt = <1000000>;\n" @@ -464,7 +459,7 @@ "> -\t\t\t\t\tregulator-max-microvolt = <1800000>;\n" "> -\t\t\t\t\tregulator-boot-on;\n" "> -\t\t\t\t};\n" - "> +\t\t\tldo10_reg: ldo@10 {\n" + "> +\t\t\tldo10_reg: ldo at 10 {\n" "> +\t\t\t\tregulator-compatible = \"LDO10\";\n" "> +\t\t\t\tregulator-name = \"VDDQ_MIPIHSI_1.8V\";\n" "> +\t\t\t\tregulator-min-microvolt = <1800000>;\n" @@ -617,11 +612,11 @@ "> -\t\t};\n" "> -\t};\n" "> \n" - "> -\ti2c@13870000 {\n" + "> -\ti2c at 13870000 {\n" "> -\t\tpinctrl-names = \"default\";\n" "> -\t\tpinctrl-0 = <&i2c1_bus>;\n" "> -\t\tstatus = \"okay\";\n" - "> -\t\tmax98090: max98090@10 {\n" + "> -\t\tmax98090: max98090 at 10 {\n" "> -\t\t\tcompatible = \"maxim,max98090\";\n" "> -\t\t\treg = <0x10>;\n" "> -\t\t\tinterrupt-parent = <&gpx0>;\n" @@ -639,7 +634,7 @@ "> +\t\t\t\tregulator-boot-on;\n" "> +\t\t\t};\n" "> \n" - "> -\texynos-usbphy@125B0000 {\n" + "> -\texynos-usbphy at 125B0000 {\n" "> -\t\tstatus = \"okay\";\n" "> -\t};\n" "> +\t\t\tbuck3_reg: BUCK3 {\n" @@ -650,7 +645,7 @@ "> +\t\t\t\tregulator-boot-on;\n" "> +\t\t\t};\n" "> \n" - "> -\thsotg@12480000 {\n" + "> -\thsotg at 12480000 {\n" "> -\t\tdr_mode = \"peripheral\";\n" "> -\t\tstatus = \"okay\";\n" "> -\t\tvusb_d-supply = <&ldo15_reg>;\n" @@ -663,7 +658,7 @@ "> +\t\t\t\tregulator-microvolt-offset = <50000>;\n" "> +\t\t\t};\n" "> \n" - "> -\tehci: ehci@12580000 {\n" + "> -\tehci: ehci at 12580000 {\n" "> -\t\tstatus = \"okay\";\n" "> -\t};\n" "> +\t\t\tbuck5_reg: BUCK5 {\n" @@ -674,7 +669,7 @@ "> +\t\t\t\tregulator-boot-on;\n" "> +\t\t\t};\n" "> \n" - "> -\ttmu@100C0000 {\n" + "> -\ttmu at 100C0000 {\n" "> -\t\tvtmu-supply = <&ldo10_reg>;\n" "> -\t\tstatus = \"okay\";\n" "> -\t};\n" @@ -714,13 +709,13 @@ "> \t};\n" "> +};\n" "> \n" - "> -\tmixer: mixer@12C10000 {\n" + "> -\tmixer: mixer at 12C10000 {\n" "> -\t\tstatus = \"okay\";\n" "> +&i2c_1 {\n" "> +\tpinctrl-names = \"default\";\n" "> +\tpinctrl-0 = <&i2c1_bus>;\n" "> +\tstatus = \"okay\";\n" - "> +\tmax98090: max98090@10 {\n" + "> +\tmax98090: max98090 at 10 {\n" "> +\t\tcompatible = \"maxim,max98090\";\n" "> +\t\treg = <0x10>;\n" "> +\t\tinterrupt-parent = <&gpx0>;\n" @@ -731,7 +726,7 @@ "> \t};\n" "> +};\n" "> \n" - "> -\thdmi@12D00000 {\n" + "> -\thdmi at 12D00000 {\n" "> -\t\thpd-gpio = <&gpx3 7 0>;\n" "> -\t\tpinctrl-names = \"default\";\n" "> -\t\tpinctrl-0 = <&hdmi_hpd>;\n" @@ -747,7 +742,7 @@ "> +\tpinctrl-0 = <&i2c2_bus>;\n" "> +};\n" "> \n" - "> -\thdmi_ddc: i2c@13880000 {\n" + "> -\thdmi_ddc: i2c at 13880000 {\n" "> -\t\tstatus = \"okay\";\n" "> -\t\tpinctrl-names = \"default\";\n" "> -\t\tpinctrl-0 = <&i2c2_bus>;\n" @@ -756,7 +751,7 @@ "> +\tstatus = \"okay\";\n" "> +};\n" "> \n" - "> -\ti2c@138E0000 {\n" + "> -\ti2c at 138E0000 {\n" "> -\t\tstatus = \"okay\";\n" "> -\t};\n" "> +&i2s0 {\n" @@ -849,11 +844,11 @@ "> \t\t};\n" "> \t};\n" "> \n" - "> -\tserial@13820000 {\n" + "> -\tserial at 13820000 {\n" "> -\t\tstatus = \"okay\";\n" "> -\t};\n" "> -\n" - "> -\tserial@13830000 {\n" + "> -\tserial at 13830000 {\n" "> -\t\tstatus = \"okay\";\n" "> -\t};\n" "> -\n" @@ -877,23 +872,15 @@ "> \n" "> --\n" "> To unsubscribe from this list: send the line \"unsubscribe linux-kernel\" in\n" - "> the body of a message to majordomo@vger.kernel.org\n" + "> the body of a message to majordomo at vger.kernel.org\n" "> More majordomo info at http://vger.kernel.org/majordomo-info.html\n" - > Please read the FAQ at http://www.tux.org/lkml/ - "\01:2\0" - "fn\0signature.asc\0" - "d\0Digital signature\0" - "b\0" - "-----BEGIN PGP SIGNATURE-----\n" - "Version: GnuPG v1.4.12 (GNU/Linux)\n" - "\n" - "iQEcBAEBAgAGBQJVUUCNAAoJEMLUO4d9pOJWDeIH/2gicPo6BhXXaKNKQ4/e4rGE\n" - "M6FnYsu5qoPkW3QgnjJT4kb8Nr8s/lyB1YvOcTfDDZzpqrteO3HhDxxrs90yps6b\n" - "OZnbJ+D9F3sqtnUZF63clSSxWIwzNt4/jvcf0fBwyjrjSC1bkXcdoKsVz1Tlgqe8\n" - "GE5FaAVigJ3cyC9a0b/IiG2lagcM0KzcG3T+hJ3jeGQG4pzFWRa2QJex71X+yfw0\n" - "ETn297pmddc4IS5Z5F1ll5Aq0rJl72JfA/xjPcaZCuAXf0Nlfx0f41LQsptXgYqo\n" - "nWwrtFXmaETg5LbNreEV00mkHmtwXA+ep4p8BH5pM0O+4i0SnYvC3YahOnXEfGg=\n" - "=9GhN\n" - "-----END PGP SIGNATURE-----\n" + "> Please read the FAQ at http://www.tux.org/lkml/\n" + "-------------- next part --------------\n" + "A non-text attachment was scrubbed...\n" + "Name: signature.asc\n" + "Type: application/pgp-signature\n" + "Size: 490 bytes\n" + "Desc: Digital signature\n" + URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150511/35e4b26d/attachment.sig> -4f995e49b58a096c6a2488cb9e86c2f5327fbcf9d2f4057127d76f88855367d2 +3f8ad2abfa5909eb62a8a58897bafa9b41d67389136a72e6082153d4cf71853e
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.