From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
To: Sean Young <sean@mess.org>
Cc: linux-media@vger.kernel.org, "David Härdeman" <david@hardeman.nu>
Subject: Re: [RFC PATCH 4/6] [media] rc: lirc is not a protocol or a keymap
Date: Thu, 14 May 2015 13:51:23 -0300 [thread overview]
Message-ID: <20150514135123.4ba85dc7@recife.lan> (raw)
In-Reply-To: <2a2f4281ba60988242c11bdf2fda3243e2dc4467.1426801061.git.sean@mess.org>
Em Thu, 19 Mar 2015 21:50:15 +0000
Sean Young <sean@mess.org> escreveu:
> Since the lirc bridge is not a decoder we can remove its protocol. The
> keymap existed only to select the protocol.
This changes the userspace interface, as now it is possible to enable/disable
LIRC handling from a given IR via /proc interface.
>
> Signed-off-by: Sean Young <sean@mess.org>
> ---
> drivers/media/rc/keymaps/Makefile | 1 -
> drivers/media/rc/keymaps/rc-lirc.c | 42 --------------------------------------
> drivers/media/rc/rc-main.c | 1 -
> drivers/media/rc/st_rc.c | 2 +-
> include/media/rc-map.h | 42 +++++++++++++++++---------------------
> 5 files changed, 20 insertions(+), 68 deletions(-)
> delete mode 100644 drivers/media/rc/keymaps/rc-lirc.c
>
> diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
> index abf6079..661cd25 100644
> --- a/drivers/media/rc/keymaps/Makefile
> +++ b/drivers/media/rc/keymaps/Makefile
> @@ -51,7 +51,6 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
> rc-kworld-pc150u.o \
> rc-kworld-plus-tv-analog.o \
> rc-leadtek-y04g0051.o \
> - rc-lirc.o \
> rc-lme2510.o \
> rc-manli.o \
> rc-medion-x10.o \
> diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c
> deleted file mode 100644
> index fbf08fa..0000000
> --- a/drivers/media/rc/keymaps/rc-lirc.c
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -/* rc-lirc.c - Empty dummy keytable, for use when its preferred to pass
> - * all raw IR data to the lirc userspace decoder.
> - *
> - * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#include <media/rc-core.h>
> -#include <linux/module.h>
> -
> -static struct rc_map_table lirc[] = {
> - { },
> -};
> -
> -static struct rc_map_list lirc_map = {
> - .map = {
> - .scan = lirc,
> - .size = ARRAY_SIZE(lirc),
> - .rc_type = RC_TYPE_LIRC,
> - .name = RC_MAP_LIRC,
> - }
> -};
> -
> -static int __init init_rc_map_lirc(void)
> -{
> - return rc_map_register(&lirc_map);
> -}
> -
> -static void __exit exit_rc_map_lirc(void)
> -{
> - rc_map_unregister(&lirc_map);
> -}
> -
> -module_init(init_rc_map_lirc)
> -module_exit(exit_rc_map_lirc)
> -
> -MODULE_LICENSE("GPL");
> -MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
> diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
> index 128909c..e717dc9 100644
> --- a/drivers/media/rc/rc-main.c
> +++ b/drivers/media/rc/rc-main.c
> @@ -797,7 +797,6 @@ static struct {
> { RC_BIT_SANYO, "sanyo" },
> { RC_BIT_SHARP, "sharp" },
> { RC_BIT_MCE_KBD, "mce_kbd" },
> - { RC_BIT_LIRC, "lirc" },
> { RC_BIT_XMP, "xmp" },
> };
>
> diff --git a/drivers/media/rc/st_rc.c b/drivers/media/rc/st_rc.c
> index 0e758ae..4834e78 100644
> --- a/drivers/media/rc/st_rc.c
> +++ b/drivers/media/rc/st_rc.c
> @@ -295,7 +295,7 @@ static int st_rc_probe(struct platform_device *pdev)
> rdev->open = st_rc_open;
> rdev->close = st_rc_close;
> rdev->driver_name = IR_ST_NAME;
> - rdev->map_name = RC_MAP_LIRC;
> + rdev->map_name = RC_MAP_EMPTY;
> rdev->input_name = "ST Remote Control Receiver";
>
> /* enable wake via this device */
> diff --git a/include/media/rc-map.h b/include/media/rc-map.h
> index e7a1514..dfca14b 100644
> --- a/include/media/rc-map.h
> +++ b/include/media/rc-map.h
> @@ -14,30 +14,28 @@
> enum rc_type {
> RC_TYPE_UNKNOWN = 0, /* Protocol not known */
> RC_TYPE_OTHER = 1, /* Protocol known but proprietary */
> - RC_TYPE_LIRC = 2, /* Pass raw IR to lirc userspace */
> - RC_TYPE_RC5 = 3, /* Philips RC5 protocol */
> - RC_TYPE_RC5X = 4, /* Philips RC5x protocol */
> - RC_TYPE_RC5_SZ = 5, /* StreamZap variant of RC5 */
> - RC_TYPE_JVC = 6, /* JVC protocol */
> - RC_TYPE_SONY12 = 7, /* Sony 12 bit protocol */
> - RC_TYPE_SONY15 = 8, /* Sony 15 bit protocol */
> - RC_TYPE_SONY20 = 9, /* Sony 20 bit protocol */
> - RC_TYPE_NEC = 10, /* NEC protocol */
> - RC_TYPE_SANYO = 11, /* Sanyo protocol */
> - RC_TYPE_MCE_KBD = 12, /* RC6-ish MCE keyboard/mouse */
> - RC_TYPE_RC6_0 = 13, /* Philips RC6-0-16 protocol */
> - RC_TYPE_RC6_6A_20 = 14, /* Philips RC6-6A-20 protocol */
> - RC_TYPE_RC6_6A_24 = 15, /* Philips RC6-6A-24 protocol */
> - RC_TYPE_RC6_6A_32 = 16, /* Philips RC6-6A-32 protocol */
> - RC_TYPE_RC6_MCE = 17, /* MCE (Philips RC6-6A-32 subtype) protocol */
> - RC_TYPE_SHARP = 18, /* Sharp protocol */
> - RC_TYPE_XMP = 19, /* XMP protocol */
> + RC_TYPE_RC5 = 2, /* Philips RC5 protocol */
> + RC_TYPE_RC5X = 3, /* Philips RC5x protocol */
> + RC_TYPE_RC5_SZ = 4, /* StreamZap variant of RC5 */
> + RC_TYPE_JVC = 5, /* JVC protocol */
> + RC_TYPE_SONY12 = 6, /* Sony 12 bit protocol */
> + RC_TYPE_SONY15 = 7, /* Sony 15 bit protocol */
> + RC_TYPE_SONY20 = 8, /* Sony 20 bit protocol */
> + RC_TYPE_NEC = 9, /* NEC protocol */
> + RC_TYPE_SANYO = 10, /* Sanyo protocol */
> + RC_TYPE_MCE_KBD = 11, /* RC6-ish MCE keyboard/mouse */
> + RC_TYPE_RC6_0 = 12, /* Philips RC6-0-16 protocol */
> + RC_TYPE_RC6_6A_20 = 13, /* Philips RC6-6A-20 protocol */
> + RC_TYPE_RC6_6A_24 = 14, /* Philips RC6-6A-24 protocol */
> + RC_TYPE_RC6_6A_32 = 15, /* Philips RC6-6A-32 protocol */
> + RC_TYPE_RC6_MCE = 16, /* MCE (Philips RC6-6A-32 subtype) protocol */
> + RC_TYPE_SHARP = 17, /* Sharp protocol */
> + RC_TYPE_XMP = 18, /* XMP protocol */
> };
>
> #define RC_BIT_NONE 0
> #define RC_BIT_UNKNOWN (1 << RC_TYPE_UNKNOWN)
> #define RC_BIT_OTHER (1 << RC_TYPE_OTHER)
> -#define RC_BIT_LIRC (1 << RC_TYPE_LIRC)
> #define RC_BIT_RC5 (1 << RC_TYPE_RC5)
> #define RC_BIT_RC5X (1 << RC_TYPE_RC5X)
> #define RC_BIT_RC5_SZ (1 << RC_TYPE_RC5_SZ)
> @@ -56,9 +54,8 @@ enum rc_type {
> #define RC_BIT_SHARP (1 << RC_TYPE_SHARP)
> #define RC_BIT_XMP (1 << RC_TYPE_XMP)
>
> -#define RC_BIT_ALL (RC_BIT_UNKNOWN | RC_BIT_OTHER | RC_BIT_LIRC | \
> - RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ | \
> - RC_BIT_JVC | \
> +#define RC_BIT_ALL (RC_BIT_UNKNOWN | RC_BIT_OTHER | RC_BIT_RC5 | \
> + RC_BIT_RC5X | RC_BIT_RC5_SZ | RC_BIT_JVC | \
> RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20 | \
> RC_BIT_NEC | RC_BIT_SANYO | RC_BIT_MCE_KBD | \
> RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 | \
> @@ -160,7 +157,6 @@ void rc_map_init(void);
> #define RC_MAP_KWORLD_PC150U "rc-kworld-pc150u"
> #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
> #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
> -#define RC_MAP_LIRC "rc-lirc"
> #define RC_MAP_LME2510 "rc-lme2510"
> #define RC_MAP_MANLI "rc-manli"
> #define RC_MAP_MEDION_X10 "rc-medion-x10"
next prev parent reply other threads:[~2015-05-14 16:51 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-19 21:50 [RFC PATCH 0/6] Send and receive decoded IR using lirc interface Sean Young
2015-03-19 21:50 ` [RFC PATCH 1/6] [media] lirc: remove broken features Sean Young
2015-05-14 16:39 ` Mauro Carvalho Chehab
2015-03-19 21:50 ` [RFC PATCH 2/6] [media] lirc: LIRC_[SG]ET_SEND_MODE should return -ENOSYS Sean Young
2015-05-14 17:00 ` Mauro Carvalho Chehab
2015-03-19 21:50 ` [RFC PATCH 3/6] [media] rc: lirc bridge should not be a raw decoder Sean Young
2015-05-14 16:47 ` Mauro Carvalho Chehab
2015-03-19 21:50 ` [RFC PATCH 4/6] [media] rc: lirc is not a protocol or a keymap Sean Young
2015-05-14 16:51 ` Mauro Carvalho Chehab [this message]
2015-05-19 20:34 ` David Härdeman
2015-05-20 8:19 ` Mauro Carvalho Chehab
2015-05-20 8:49 ` David Härdeman
2015-05-20 9:01 ` Mauro Carvalho Chehab
2015-05-20 9:06 ` David Härdeman
2015-05-20 19:16 ` David Härdeman
2015-05-20 20:54 ` David Härdeman
2015-03-19 21:50 ` [RFC PATCH 5/6] [media] lirc: pass IR scancodes to userspace via lirc bridge Sean Young
2015-05-14 16:58 ` Mauro Carvalho Chehab
2015-03-19 21:50 ` [RFC PATCH 6/6] [media] rc: teach lirc how to send scancodes Sean Young
2015-05-14 17:04 ` Mauro Carvalho Chehab
2015-05-20 8:53 ` David Härdeman
2015-05-20 9:08 ` Mauro Carvalho Chehab
2015-05-20 9:18 ` David Härdeman
2015-03-30 21:18 ` [RFC PATCH 0/6] Send and receive decoded IR using lirc interface David Härdeman
2015-03-30 23:08 ` Sean Young
2015-04-01 20:33 ` David Härdeman
2015-03-31 23:47 ` Mauro Carvalho Chehab
2015-04-01 22:19 ` David Härdeman
2015-04-01 23:10 ` Mauro Carvalho Chehab
2015-04-01 23:55 ` David Härdeman
2015-04-02 11:37 ` David Härdeman
2015-04-03 10:11 ` Sean Young
2015-04-03 18:41 ` David Härdeman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150514135123.4ba85dc7@recife.lan \
--to=mchehab@osg.samsung.com \
--cc=david@hardeman.nu \
--cc=linux-media@vger.kernel.org \
--cc=sean@mess.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.