From: Pavel Machek <pavel@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] u-boot: adjust config_cmd_default.h not to raise ton of warnings
Date: Fri, 15 May 2015 10:36:56 +0200 [thread overview]
Message-ID: <20150515083656.GA23564@amd> (raw)
In-Reply-To: <20150501091411.GB7205@amd>
On Fri 2015-05-01 11:14:11, Pavel Machek wrote:
>
> If there's duplicty between config system and config_cmd_default, a
> ton of warnings is raised, because one uses plain defines, and other
> defines it to 1. Adjust config_cmd_default.h not to provoke the
> warnings.
>
> Signed-off-by: Pavel Machek <pavel@denx.de>
Ping? Yamada, can you apply this? Tom?
Pavel
> diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h
> index e79a13b..2f60d63 100644
> --- a/include/config_cmd_default.h
> +++ b/include/config_cmd_default.h
> @@ -16,29 +16,29 @@
> * hardware, not fully tested, etc.).
> */
>
> -#define CONFIG_CMD_BDI /* bdinfo */
> -#define CONFIG_CMD_BOOTD /* bootd */
> -#define CONFIG_CMD_CONSOLE /* coninfo */
> -#define CONFIG_CMD_ECHO /* echo arguments */
> -#define CONFIG_CMD_EDITENV /* editenv */
> -#define CONFIG_CMD_ENV_EXISTS /* query whether env variables exists */
> -#define CONFIG_CMD_FPGA /* FPGA configuration Support */
> -#define CONFIG_CMD_IMI /* iminfo */
> -#define CONFIG_CMD_ITEST /* Integer (and string) test */
> +#define CONFIG_CMD_BDI 1 /* bdinfo */
> +#define CONFIG_CMD_BOOTD 1 /* bootd */
> +#define CONFIG_CMD_CONSOLE 1 /* coninfo */
> +#define CONFIG_CMD_ECHO 1 /* echo arguments */
> +#define CONFIG_CMD_EDITENV 1 /* editenv */
> +#define CONFIG_CMD_ENV_EXISTS 1 /* query whether env variables exists */
> +#define CONFIG_CMD_FPGA 1 /* FPGA configuration Support */
> +#define CONFIG_CMD_IMI 1 /* iminfo */
> +#define CONFIG_CMD_ITEST 1 /* Integer (and string) test */
> #ifndef CONFIG_SYS_NO_FLASH
> -#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
> -#define CONFIG_CMD_IMLS /* List all found images */
> +#define CONFIG_CMD_FLASH 1 /* flinfo, erase, protect */
> +#define CONFIG_CMD_IMLS 1 /* List all found images */
> #endif
> -#define CONFIG_CMD_LOADB /* loadb */
> -#define CONFIG_CMD_LOADS /* loads */
> -#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */
> -#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
> -#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
> -#define CONFIG_CMD_NFS /* NFS support */
> -#define CONFIG_CMD_RUN /* run command in env variable */
> -#define CONFIG_CMD_SAVEENV /* saveenv */
> -#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
> -#define CONFIG_CMD_SOURCE /* "source" command support */
> -#define CONFIG_CMD_XIMG /* Load part of Multi Image */
> +#define CONFIG_CMD_LOADB 1 /* loadb */
> +#define CONFIG_CMD_LOADS 1 /* loads */
> +#define CONFIG_CMD_MEMORY 1 /* md mm nm mw cp cmp crc base loop */
> +#define CONFIG_CMD_MISC 1 /* Misc functions like sleep etc*/
> +#define CONFIG_CMD_NET 1 /* bootp, tftpboot, rarpboot */
> +#define CONFIG_CMD_NFS 1 /* NFS support */
> +#define CONFIG_CMD_RUN 1 /* run command in env variable */
> +#define CONFIG_CMD_SAVEENV 1 /* saveenv */
> +#define CONFIG_CMD_SETGETDCR 1 /* DCR support on 4xx */
> +#define CONFIG_CMD_SOURCE 1 /* "source" command support */
> +#define CONFIG_CMD_XIMG 1 /* Load part of Multi Image */
>
> #endif /* _CONFIG_CMD_DEFAULT_H */
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2015-05-15 8:36 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-01 9:14 [U-Boot] [PATCH] u-boot: adjust config_cmd_default.h not to raise ton of warnings Pavel Machek
2015-05-01 15:24 ` Stephen Warren
2015-05-03 10:01 ` Pavel Machek
2015-05-03 16:40 ` Stephen Warren
2015-05-03 19:33 ` Pavel Machek
2015-05-15 8:36 ` Pavel Machek [this message]
2015-05-15 9:12 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150515083656.GA23564@amd \
--to=pavel@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.