From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] clk: meson8b: Add support for Meson8b clocks
Date: Thu, 28 May 2015 15:01:00 -0700 [thread overview]
Message-ID: <20150528220100.GE24204@codeaurora.org> (raw)
In-Reply-To: <1431773333-23567-4-git-send-email-carlo@caione.org>
On 05/16, Carlo Caione wrote:
> diff --git a/drivers/clk/meson/meson8b-clkc.c b/drivers/clk/meson/meson8b-clkc.c
> new file mode 100644
> index 0000000..b8be5c7
> --- /dev/null
> +++ b/drivers/clk/meson/meson8b-clkc.c
> @@ -0,0 +1,182 @@
> +/*
> + * Copyright (c) 2015 Endless Mobile, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
Do you need this include?
> +#include <linux/clk-provider.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +#include <dt-bindings/clock/meson8b-clkc.h>
> +
> +#include "clkc.h"
> +
> +#define MESON8B_REG_CTL0_ADDR 0x0000
> +#define MESON8B_REG_SYS_CPU_CNTL1 0x015c
> +#define MESON8B_REG_HHI_MPEG 0x0174
> +#define MESON8B_REG_MALI 0x01b0
> +#define MESON8B_REG_PLL_FIXED 0x0280
> +#define MESON8B_REG_PLL_SYS 0x0300
> +#define MESON8B_REG_PLL_VID 0x0320
> +
> +static struct pll_rate_table sys_pll_rate_table[] = {
const?
> + PLL_RATE(312000000, 52, 1, 2),
> + PLL_RATE(336000000, 56, 1, 2),
> + PLL_RATE(360000000, 60, 1, 2),
> + PLL_RATE(384000000, 64, 1, 2),
> + PLL_RATE(408000000, 68, 1, 2),
> + PLL_RATE(432000000, 72, 1, 2),
> + PLL_RATE(456000000, 76, 1, 2),
> + PLL_RATE(480000000, 80, 1, 2),
> + PLL_RATE(504000000, 84, 1, 2),
> + PLL_RATE(528000000, 88, 1, 2),
> + PLL_RATE(552000000, 92, 1, 2),
> + PLL_RATE(576000000, 96, 1, 2),
> + PLL_RATE(600000000, 50, 1, 1),
> + PLL_RATE(624000000, 52, 1, 1),
> + PLL_RATE(648000000, 54, 1, 1),
> + PLL_RATE(672000000, 56, 1, 1),
> + PLL_RATE(696000000, 58, 1, 1),
> + PLL_RATE(720000000, 60, 1, 1),
> + PLL_RATE(744000000, 62, 1, 1),
> + PLL_RATE(768000000, 64, 1, 1),
> + PLL_RATE(792000000, 66, 1, 1),
> + PLL_RATE(816000000, 68, 1, 1),
> + PLL_RATE(840000000, 70, 1, 1),
> + PLL_RATE(864000000, 72, 1, 1),
> + PLL_RATE(888000000, 74, 1, 1),
> + PLL_RATE(912000000, 76, 1, 1),
> + PLL_RATE(936000000, 78, 1, 1),
> + PLL_RATE(960000000, 80, 1, 1),
> + PLL_RATE(984000000, 82, 1, 1),
> + PLL_RATE(1008000000, 84, 1, 1),
> + PLL_RATE(1032000000, 86, 1, 1),
> + PLL_RATE(1056000000, 88, 1, 1),
> + PLL_RATE(1080000000, 90, 1, 1),
> + PLL_RATE(1104000000, 92, 1, 1),
> + PLL_RATE(1128000000, 94, 1, 1),
> + PLL_RATE(1152000000, 96, 1, 1),
> + PLL_RATE(1176000000, 98, 1, 1),
> + PLL_RATE(1200000000, 50, 1, 0),
> + PLL_RATE(1224000000, 51, 1, 0),
> + PLL_RATE(1248000000, 52, 1, 0),
> + PLL_RATE(1272000000, 53, 1, 0),
> + PLL_RATE(1296000000, 54, 1, 0),
> + PLL_RATE(1320000000, 55, 1, 0),
> + PLL_RATE(1344000000, 56, 1, 0),
> + PLL_RATE(1368000000, 57, 1, 0),
> + PLL_RATE(1392000000, 58, 1, 0),
> + PLL_RATE(1416000000, 59, 1, 0),
> + PLL_RATE(1440000000, 60, 1, 0),
> + PLL_RATE(1464000000, 61, 1, 0),
> + PLL_RATE(1488000000, 62, 1, 0),
> + PLL_RATE(1512000000, 63, 1, 0),
> + PLL_RATE(1536000000, 64, 1, 0),
> + { /* sentinel */ },
> +};
> +
> +PNAME(p_xtal) = { "xtal" };
> +PNAME(p_fclk_div) = { "fixed_pll" };
> +PNAME(p_cpu_clk) = { "sys_pll" };
> +PNAME(p_clk81) = { "fclk_div3", "fclk_div4", "fclk_div5" };
> +PNAME(p_mali) = { "fclk_div3", "fclk_div4", "fclk_div5",
> + "fclk_div7", "zero" };
> +
> +static u32 mux_table_clk81[] = { 6, 5, 7 };
> +static u32 mux_table_mali[] = { 6, 5, 7, 4, 0 };
> +
> +static struct pll_conf pll_confs = {
> + .m = PARM(0x00, 0, 9),
> + .n = PARM(0x00, 9, 5),
> + .od = PARM(0x00, 16, 2),
> +};
> +
> +static struct pll_conf sys_pll_conf = {
> + .m = PARM(0x00, 0, 9),
> + .n = PARM(0x00, 9, 5),
> + .od = PARM(0x00, 16, 2),
> + .rate_table = sys_pll_rate_table,
> +};
> +
> +static struct composite_conf clk81_conf __initdata = {
Can this be __initconstdata?
> + .mux_table = mux_table_clk81,
> + .mux_flags = CLK_MUX_READ_ONLY,
> + .mux_parm = PARM(0x00, 12, 3),
> + .div_parm = PARM(0x00, 0, 7),
> + .gate_parm = PARM(0x00, 7, 1),
> +};
> +
> +static struct composite_conf mali_conf __initdata = {
> + .mux_table = mux_table_mali,
> + .mux_parm = PARM(0x00, 9, 3),
> + .div_parm = PARM(0x00, 0, 7),
> + .gate_parm = PARM(0x00, 8, 1),
> +};
> +
> +static struct clk_conf meson8b_xtal_conf __initdata =
> + FIXED_RATE_P(MESON8B_REG_CTL0_ADDR, CLKID_XTAL, "xtal",
> + CLK_IS_ROOT, PARM(0x00, 4, 7));
> +
> +static struct clk_conf meson8b_clk_confs[] __initdata = {
const?
> + FIXED_RATE(CLKID_ZERO, "zero", CLK_IS_ROOT, 0),
> + PLL(MESON8B_REG_PLL_FIXED, CLKID_PLL_FIXED, "fixed_pll",
> + p_xtal, 0, &pll_confs),
> + PLL(MESON8B_REG_PLL_VID, CLKID_PLL_VID, "vid_pll",
> + p_xtal, 0, &pll_confs),
> + PLL(MESON8B_REG_PLL_SYS, CLKID_PLL_SYS, "sys_pll",
> + p_xtal, 0, &sys_pll_conf),
> + FIXED_FACTOR_DIV(CLKID_FCLK_DIV2, "fclk_div2", p_fclk_div, 0, 2),
> + FIXED_FACTOR_DIV(CLKID_FCLK_DIV3, "fclk_div3", p_fclk_div, 0, 3),
> + FIXED_FACTOR_DIV(CLKID_FCLK_DIV4, "fclk_div4", p_fclk_div, 0, 4),
> + FIXED_FACTOR_DIV(CLKID_FCLK_DIV5, "fclk_div5", p_fclk_div, 0, 5),
> + FIXED_FACTOR_DIV(CLKID_FCLK_DIV7, "fclk_div7", p_fclk_div, 0, 7),
> + CPU(MESON8B_REG_SYS_CPU_CNTL1, CLKID_CPUCLK, "a5_clk", p_cpu_clk),
> + COMPOSITE(MESON8B_REG_HHI_MPEG, CLKID_CLK81, "clk81", p_clk81,
> + CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED, &clk81_conf),
> + COMPOSITE(MESON8B_REG_MALI, CLKID_MALI, "mali", p_mali,
> + CLK_IGNORE_UNUSED, &mali_conf),
Ah here we see the defines used.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2015-05-28 22:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-16 10:48 [PATCH v2 0/3] clk: meson: Add clock controller Carlo Caione
2015-05-16 10:48 ` [PATCH v2 1/3] clk: meson: Add support for Meson " Carlo Caione
2015-05-28 21:55 ` Stephen Boyd
2015-05-29 17:45 ` Carlo Caione
2015-05-16 10:48 ` [PATCH v2 2/3] clk: meson: Document bindings for Meson8b " Carlo Caione
2015-05-28 21:57 ` Stephen Boyd
2015-05-29 17:53 ` Carlo Caione
2015-05-16 10:48 ` [PATCH v2 3/3] clk: meson8b: Add support for Meson8b clocks Carlo Caione
2015-05-28 22:01 ` Stephen Boyd [this message]
2015-05-29 17:56 ` Carlo Caione
2015-05-27 14:36 ` [PATCH v2 0/3] clk: meson: Add clock controller Carlo Caione
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150528220100.GE24204@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.