diff for duplicates of <20150529010733.4469.33722@quantum> diff --git a/a/1.txt b/N1/1.txt index ac99b4e..2ccdc69 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,7 +1,6 @@ Quoting Kevin Hilman (2015-05-28 10:32:05) > Bintian <bintian.wang@huawei.com> writes: -> = - +> > > Hello Mike, > > > > On 2015/5/28 13:26, Michael Turquette wrote: @@ -24,15 +23,12 @@ Quoting Kevin Hilman (2015-05-28 10:32:05) > >> > >> Hi Bintian, > >> -> >> Thanks for making the changes requested by Stephen. I've taken his pat= -ch +> >> Thanks for making the changes requested by Stephen. I've taken his patch > >> to add assigned-clock-rate/parent support for AMBA interconnects and -> >> applied it to 4.1-rc1, and then I've applied your v8 patches #4-6 on t= -op +> >> applied it to 4.1-rc1, and then I've applied your v8 patches #4-6 on top > >> of that. You can find it at: > >> -> >> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next-h= -i6220 +> >> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next-hi6220 > > Thank you very much! > > > > I think you also need to pick patch "[PATCH v5 3/6] clk: hi6220: @@ -46,13 +42,11 @@ i6220 > >> Stephen, > >> > >> Can you send your patch out to Russell properly? It needs his ack (or -> >> for him to take it outright) in order to unblock the hi6220 clock driv= -er +> >> for him to take it outright) in order to unblock the hi6220 clock driver > >> from being merged. > > It doesn't block hi6220 clock driver now, because the UART1 is not > > enabled in hi6220 dts now. -> = - +> > Now that the clk changes are queued up, can you (re)post the remaining > hikey patches with a changelog stating the dependency on the clk-next > branch. I believe what's left is just the DT and Kconfig/defconfig @@ -65,13 +59,10 @@ Russell acks Stephen's patch then it may be changed. Regards, Mike -> = - +> > With some acks from the DT maintainers, these should be ready to be > merged through arm-soc. -> = - +> > Thanks, -> = - +> > Kevin diff --git a/a/content_digest b/N1/content_digest index 52ab4c0..12b1a34 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -3,51 +3,15 @@ "ref\020150528052608.22384.96747@quantum\0" "ref\05566CF13.8060806@huawei.com\0" "ref\07h4mmwip62.fsf@deeprootsystems.com\0" - "From\0Michael Turquette <mturquette@linaro.org>\0" - "Subject\0Re: [PATCH v8 6/7] clk: hi6220: Clock driver support for Hisilicon hi6220 SoC\0" + "From\0mturquette@linaro.org (Michael Turquette)\0" + "Subject\0[PATCH v8 6/7] clk: hi6220: Clock driver support for Hisilicon hi6220 SoC\0" "Date\0Thu, 28 May 2015 18:07:33 -0700\0" - "To\0Kevin Hilman <khilman@kernel.org>" - " Bintian <bintian.wang@huawei.com>\0" - "Cc\0sboyd@codeaurora.org" - zhangfei.gao@linaro.org - xuwei5@hisilicon.com - xuejiancheng@huawei.com - tomeu.vizoso@collabora.com - sledge.yanwei@huawei.com - linux-clk@vger.kernel.org - linux-kernel@vger.kernel.org - arnd@arndb.de - will.deacon@arm.com - robh+dt@kernel.org - mark.rutland@arm.com - catalin.marinas@arm.com - haojian.zhuang@linaro.org - linux-arm-kernel@lists.infradead.org - olof@lixom.net - yanhaifeng@gmail.com - linux@arm.linux.org.uk - guodong.xu@linaro.org - jorge.ramirez-ortiz@linaro.org - tyler.baker@linaro.org - xuyiping@hisilicon.com - wangbinghui@hisilicon.com - zhenwei.wang@hisilicon.com - victor.lixin@hisilicon.com - puck.chen@hisilicon.com - dan.zhao@hisilicon.com - huxinwei@huawei.com - z.liuxinliang@huawei.com - heyunlei@huawei.com - kong.kongxinwei@hisilicon.com - wangbintian@gmail.com - w.f@huawei.com - " liguozhu@hisilicon.com\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Quoting Kevin Hilman (2015-05-28 10:32:05)\n" "> Bintian <bintian.wang@huawei.com> writes:\n" - "> =\n" - "\n" + "> \n" "> > Hello Mike,\n" "> >\n" "> > On 2015/5/28 13:26, Michael Turquette wrote:\n" @@ -70,15 +34,12 @@ "> >>\n" "> >> Hi Bintian,\n" "> >>\n" - "> >> Thanks for making the changes requested by Stephen. I've taken his pat=\n" - "ch\n" + "> >> Thanks for making the changes requested by Stephen. I've taken his patch\n" "> >> to add assigned-clock-rate/parent support for AMBA interconnects and\n" - "> >> applied it to 4.1-rc1, and then I've applied your v8 patches #4-6 on t=\n" - "op\n" + "> >> applied it to 4.1-rc1, and then I've applied your v8 patches #4-6 on top\n" "> >> of that. You can find it at:\n" "> >>\n" - "> >> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next-h=\n" - "i6220\n" + "> >> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next-hi6220\n" "> > Thank you very much!\n" "> >\n" "> > I think you also need to pick patch \"[PATCH v5 3/6] clk: hi6220:\n" @@ -92,13 +53,11 @@ "> >> Stephen,\n" "> >>\n" "> >> Can you send your patch out to Russell properly? It needs his ack (or\n" - "> >> for him to take it outright) in order to unblock the hi6220 clock driv=\n" - "er\n" + "> >> for him to take it outright) in order to unblock the hi6220 clock driver\n" "> >> from being merged.\n" "> > It doesn't block hi6220 clock driver now, because the UART1 is not\n" "> > enabled in hi6220 dts now.\n" - "> =\n" - "\n" + "> \n" "> Now that the clk changes are queued up, can you (re)post the remaining\n" "> hikey patches with a changelog stating the dependency on the clk-next\n" "> branch. I believe what's left is just the DT and Kconfig/defconfig\n" @@ -111,15 +70,12 @@ "Regards,\n" "Mike\n" "\n" - "> =\n" - "\n" + "> \n" "> With some acks from the DT maintainers, these should be ready to be\n" "> merged through arm-soc.\n" - "> =\n" - "\n" + "> \n" "> Thanks,\n" - "> =\n" - "\n" + "> \n" > Kevin -4038e5b890228b7a0e548b9f968a791b0e6aa5492961013dfac513767663d859 +6f365d342469c4d0379b6b69414429e559bdf163f42b764b56aafc536802dc8f
diff --git a/a/1.txt b/N2/1.txt index ac99b4e..2ccdc69 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -1,7 +1,6 @@ Quoting Kevin Hilman (2015-05-28 10:32:05) > Bintian <bintian.wang@huawei.com> writes: -> = - +> > > Hello Mike, > > > > On 2015/5/28 13:26, Michael Turquette wrote: @@ -24,15 +23,12 @@ Quoting Kevin Hilman (2015-05-28 10:32:05) > >> > >> Hi Bintian, > >> -> >> Thanks for making the changes requested by Stephen. I've taken his pat= -ch +> >> Thanks for making the changes requested by Stephen. I've taken his patch > >> to add assigned-clock-rate/parent support for AMBA interconnects and -> >> applied it to 4.1-rc1, and then I've applied your v8 patches #4-6 on t= -op +> >> applied it to 4.1-rc1, and then I've applied your v8 patches #4-6 on top > >> of that. You can find it at: > >> -> >> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next-h= -i6220 +> >> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next-hi6220 > > Thank you very much! > > > > I think you also need to pick patch "[PATCH v5 3/6] clk: hi6220: @@ -46,13 +42,11 @@ i6220 > >> Stephen, > >> > >> Can you send your patch out to Russell properly? It needs his ack (or -> >> for him to take it outright) in order to unblock the hi6220 clock driv= -er +> >> for him to take it outright) in order to unblock the hi6220 clock driver > >> from being merged. > > It doesn't block hi6220 clock driver now, because the UART1 is not > > enabled in hi6220 dts now. -> = - +> > Now that the clk changes are queued up, can you (re)post the remaining > hikey patches with a changelog stating the dependency on the clk-next > branch. I believe what's left is just the DT and Kconfig/defconfig @@ -65,13 +59,10 @@ Russell acks Stephen's patch then it may be changed. Regards, Mike -> = - +> > With some acks from the DT maintainers, these should be ready to be > merged through arm-soc. -> = - +> > Thanks, -> = - +> > Kevin diff --git a/a/content_digest b/N2/content_digest index 52ab4c0..5526e77 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -46,8 +46,7 @@ "b\0" "Quoting Kevin Hilman (2015-05-28 10:32:05)\n" "> Bintian <bintian.wang@huawei.com> writes:\n" - "> =\n" - "\n" + "> \n" "> > Hello Mike,\n" "> >\n" "> > On 2015/5/28 13:26, Michael Turquette wrote:\n" @@ -70,15 +69,12 @@ "> >>\n" "> >> Hi Bintian,\n" "> >>\n" - "> >> Thanks for making the changes requested by Stephen. I've taken his pat=\n" - "ch\n" + "> >> Thanks for making the changes requested by Stephen. I've taken his patch\n" "> >> to add assigned-clock-rate/parent support for AMBA interconnects and\n" - "> >> applied it to 4.1-rc1, and then I've applied your v8 patches #4-6 on t=\n" - "op\n" + "> >> applied it to 4.1-rc1, and then I've applied your v8 patches #4-6 on top\n" "> >> of that. You can find it at:\n" "> >>\n" - "> >> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next-h=\n" - "i6220\n" + "> >> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next-hi6220\n" "> > Thank you very much!\n" "> >\n" "> > I think you also need to pick patch \"[PATCH v5 3/6] clk: hi6220:\n" @@ -92,13 +88,11 @@ "> >> Stephen,\n" "> >>\n" "> >> Can you send your patch out to Russell properly? It needs his ack (or\n" - "> >> for him to take it outright) in order to unblock the hi6220 clock driv=\n" - "er\n" + "> >> for him to take it outright) in order to unblock the hi6220 clock driver\n" "> >> from being merged.\n" "> > It doesn't block hi6220 clock driver now, because the UART1 is not\n" "> > enabled in hi6220 dts now.\n" - "> =\n" - "\n" + "> \n" "> Now that the clk changes are queued up, can you (re)post the remaining\n" "> hikey patches with a changelog stating the dependency on the clk-next\n" "> branch. I believe what's left is just the DT and Kconfig/defconfig\n" @@ -111,15 +105,12 @@ "Regards,\n" "Mike\n" "\n" - "> =\n" - "\n" + "> \n" "> With some acks from the DT maintainers, these should be ready to be\n" "> merged through arm-soc.\n" - "> =\n" - "\n" + "> \n" "> Thanks,\n" - "> =\n" - "\n" + "> \n" > Kevin -4038e5b890228b7a0e548b9f968a791b0e6aa5492961013dfac513767663d859 +41212d42ab8b7662b50581bc3dcffac71f9cbb574ce938ca9d4bf9c6fa608cde
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.