From: Borislav Petkov <bp@alien8.de>
To: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: dougthompson@xmission.com, mchehab@osg.samsung.com,
linux-edac@vger.kernel.org, linux-kernel@vger.kernel.org,
x86@kernel.org
Subject: Re: [PATCH V2 3/9] edac, mce_amd_inj: Modify flags attrigute to use string arguments
Date: Wed, 3 Jun 2015 16:50:01 +0200 [thread overview]
Message-ID: <20150603145001.GL4403@pd.tnic> (raw)
In-Reply-To: <1433277362-10911-4-git-send-email-Aravind.Gopalakrishnan@amd.com>
On Tue, Jun 02, 2015 at 03:35:56PM -0500, Aravind Gopalakrishnan wrote:
> Use char values such as "hw" or "sw" to indicate the type of error
> injection to be performed.
>
> Current flags attribute derives the meanings of values that can be
> programmed into it from asm/mce.h. Moving to defined strings for the
> atribute allows this module to be self sufficient and removes the
> dependency. Also, we can introduce new flags as and when needed without
> having to worry about conflicting with the flags already defined
> in asm/mce.h
>
> Also, modify do_inject() to use the newly defined injection_type enum
> to figure out the injection mechanism we need to use
>
> Suggested-by: Borislav Petkov <bp@suse.de>
> Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
> ---
> drivers/edac/mce_amd_inj.c | 82 ++++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 72 insertions(+), 10 deletions(-)
...
> -static int flags_set(void *data, u64 val)
> +static ssize_t flags_write(struct file *filp, const char __user *ubuf,
> + size_t cnt, loff_t *ppos)
> {
> - struct mce *m = (struct mce *)data;
> + char buf[MAX_FLAG_OPT_SIZE];
> + int err;
> + size_t ret;
>
> - m->inject_flags = (u8)val;
> - return 0;
> + if (cnt > MAX_FLAG_OPT_SIZE)
> + cnt = MAX_FLAG_OPT_SIZE;
> +
> + ret = cnt;
> +
> + if (copy_from_user(&buf, ubuf, cnt))
> + return -EFAULT;
> +
> + buf[cnt - 1] = 0;
> +
> + /* strip whitespaces.. */
> + strstrip(buf);
Didn't your compiler trigger that:
drivers/edac/mce_amd_inj.c: In function ‘flags_write’:
drivers/edac/mce_amd_inj.c:146:2: warning: ignoring return value of ‘strstrip’, declared with attribute warn_unused_result [-Wunused-result]
strstrip(buf);
^
?
Because it is a valid warning. You need to take the return value. I
fixed it up like this:
---
diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
index c129a8da34b2..5c847fe6e9bd 100644
--- a/drivers/edac/mce_amd_inj.c
+++ b/drivers/edac/mce_amd_inj.c
@@ -128,7 +128,7 @@ static ssize_t flags_read(struct file *filp, char __user *ubuf,
static ssize_t flags_write(struct file *filp, const char __user *ubuf,
size_t cnt, loff_t *ppos)
{
- char buf[MAX_FLAG_OPT_SIZE];
+ char buf[MAX_FLAG_OPT_SIZE], *__buf;
int err;
size_t ret;
@@ -142,12 +142,12 @@ static ssize_t flags_write(struct file *filp, const char __user *ubuf,
buf[cnt - 1] = 0;
- /* strip whitespaces.. */
- strstrip(buf);
+ /* strip whitespace */
+ __buf = strstrip(buf);
- err = __set_inj(buf);
+ err = __set_inj(__buf);
if (err) {
- pr_err("%s: Invalid flags value: %s\n", __func__, buf);
+ pr_err("%s: Invalid flags value: %s\n", __func__, __buf);
return err;
}
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--
next prev parent reply other threads:[~2015-06-03 14:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-02 20:35 [PATCH V2 0/9] Updates to EDAC mce_amd_inj Aravind Gopalakrishnan
2015-06-02 20:35 ` [PATCH V2 1/9] edac, mce_amd_inj: Use MCE_INJECT_GET for bank Aravind Gopalakrishnan
2015-06-02 20:35 ` [PATCH V2 2/9] edac, mce_amd_inj: Rework sanity check for inj_bank_set Aravind Gopalakrishnan
2015-06-02 20:35 ` [PATCH V2 3/9] edac, mce_amd_inj: Modify flags attrigute to use string arguments Aravind Gopalakrishnan
2015-06-03 14:50 ` Borislav Petkov [this message]
2015-06-03 15:34 ` Aravind Gopalakrishnan
2015-06-03 16:00 ` Borislav Petkov
2015-06-03 16:24 ` Aravind Gopalakrishnan
2015-06-02 20:35 ` [PATCH V2 4/9] edac, mce_amd_inj: Add capability to trigger apic interrupts Aravind Gopalakrishnan
2015-06-02 20:35 ` [PATCH V2 5/9] edac, mce_amd_inj: Add individual permissions field for dfs_node Aravind Gopalakrishnan
2015-06-02 20:35 ` [PATCH V2 6/9] edac, mce_amd_inj: Add README file Aravind Gopalakrishnan
2015-06-02 20:36 ` [PATCH V2 7/9] x86, amd: Factor out number of nodes calculation Aravind Gopalakrishnan
2015-06-03 8:58 ` Borislav Petkov
2015-06-03 15:49 ` Aravind Gopalakrishnan
2015-06-02 20:36 ` [PATCH V2 8/9] x86, amd: Provide accessor for number of nodes Aravind Gopalakrishnan
2015-06-02 20:36 ` [PATCH V2 9/9] edac, mce_amd_inj: Inject errors on NBC for bank 4 errors Aravind Gopalakrishnan
2015-06-03 15:21 ` [PATCH V2 0/9] Updates to EDAC mce_amd_inj Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150603145001.GL4403@pd.tnic \
--to=bp@alien8.de \
--cc=Aravind.Gopalakrishnan@amd.com \
--cc=dougthompson@xmission.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@osg.samsung.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.