From: Adrien Mazarguil <adrien.mazarguil@6wind.com>
To: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Cc: dev@dpdk.org
Subject: Re: [PATCH] mlx4: fix compilation warnings for 32 bit
Date: Fri, 12 Jun 2015 17:15:46 +0200 [thread overview]
Message-ID: <20150612151546.GJ12195@6wind.com> (raw)
In-Reply-To: <1432304251-8025-1-git-send-email-nelio.laranjeiro@6wind.com>
On Fri, May 22, 2015 at 04:17:31PM +0200, Nelio Laranjeiro wrote:
> Fix warning messages "cast to pointer from integer of different size" when
> compiling DPDK in 32 bit with Mellanox PMD.
>
> SGE addresses are 64 bit integers, converting them to pointers must be done
> through uintptr_t to avoid compilation warnings when those have a different
> size.
>
> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
> ---
> lib/librte_pmd_mlx4/mlx4.c | 27 ++++++++++++++++-----------
> 1 file changed, 16 insertions(+), 11 deletions(-)
>
> diff --git a/lib/librte_pmd_mlx4/mlx4.c b/lib/librte_pmd_mlx4/mlx4.c
> index fa749f4..b0b1c50 100644
> --- a/lib/librte_pmd_mlx4/mlx4.c
> +++ b/lib/librte_pmd_mlx4/mlx4.c
> @@ -832,8 +832,8 @@ txq_free_elts(struct txq *txq)
>
> if (WR_ID(elt->wr.wr_id).offset == 0)
> continue;
> - rte_pktmbuf_free((void *)(elt->sges[0].addr -
> - WR_ID(elt->wr.wr_id).offset));
> + rte_pktmbuf_free((void *)((uintptr_t)elt->sges[0].addr -
> + WR_ID(elt->wr.wr_id).offset));
> }
> rte_free(elts);
> }
> @@ -1067,7 +1067,8 @@ mlx4_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
> /* Clean up old buffer. */
> if (likely(WR_ID(wr->wr_id).offset != 0)) {
> struct rte_mbuf *tmp = (void *)
> - (elt->sges[0].addr - WR_ID(wr->wr_id).offset);
> + ((uintptr_t)elt->sges[0].addr -
> + WR_ID(wr->wr_id).offset);
>
> /* Faster than rte_pktmbuf_free(). */
> do {
> @@ -1143,7 +1144,8 @@ mlx4_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
> /* Update SGE. */
> sge->addr = (uintptr_t)rte_pktmbuf_mtod(buf, char *);
> if (txq->priv->vf)
> - rte_prefetch0((volatile void *)sge->addr);
> + rte_prefetch0((volatile void *)
> + (uintptr_t)sge->addr);
> sge->length = DATA_LEN(buf);
> sge->lkey = lkey;
> #if (MLX4_PMD_MAX_INLINE > 0) || defined(MLX4_PMD_SOFT_COUNTERS)
> @@ -1742,7 +1744,8 @@ rxq_alloc_elts(struct rxq *rxq, unsigned int elts_n, struct rte_mbuf **pool)
> /* Make sure elts index and SGE mbuf pointer can be deduced
> * from WR ID. */
> if ((WR_ID(wr->wr_id).id != i) ||
> - ((void *)(sge->addr - WR_ID(wr->wr_id).offset) != buf)) {
> + ((void *)((uintptr_t)sge->addr -
> + WR_ID(wr->wr_id).offset) != buf)) {
> ERROR("%p: cannot store index and offset in WR ID",
> (void *)rxq);
> sge->addr = 0;
> @@ -1769,8 +1772,8 @@ error:
> if (elt->sge.addr == 0)
> continue;
> assert(WR_ID(elt->wr.wr_id).id == i);
> - buf = (void *)
> - (elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
> + buf = (void *)((uintptr_t)elt->sge.addr -
> + WR_ID(elt->wr.wr_id).offset);
> rte_pktmbuf_free_seg(buf);
> }
> rte_free(elts);
> @@ -1805,7 +1808,8 @@ rxq_free_elts(struct rxq *rxq)
> if (elt->sge.addr == 0)
> continue;
> assert(WR_ID(elt->wr.wr_id).id == i);
> - buf = (void *)(elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
> + buf = (void *)((uintptr_t)elt->sge.addr -
> + WR_ID(elt->wr.wr_id).offset);
> rte_pktmbuf_free_seg(buf);
> }
> rte_free(elts);
> @@ -2508,8 +2512,8 @@ mlx4_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
> uint32_t len = wc->byte_len;
> struct rxq_elt *elt = &(*elts)[WR_ID(wr_id).id];
> struct ibv_recv_wr *wr = &elt->wr;
> - struct rte_mbuf *seg =
> - (void *)(elt->sge.addr - WR_ID(wr_id).offset);
> + struct rte_mbuf *seg = (void *)((uintptr_t)elt->sge.addr -
> + WR_ID(wr_id).offset);
> struct rte_mbuf *rep;
>
> /* Sanity checks. */
> @@ -2891,7 +2895,8 @@ rxq_rehash(struct rte_eth_dev *dev, struct rxq *rxq)
> for (i = 0; (i != elemof(*elts)); ++i) {
> struct rxq_elt *elt = &(*elts)[i];
> struct rte_mbuf *buf = (void *)
> - (elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
> + ((uintptr_t)elt->sge.addr -
> + WR_ID(elt->wr.wr_id).offset);
>
> assert(WR_ID(elt->wr.wr_id).id == i);
> pool[k++] = buf;
> --
> 1.7.10.4
>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
--
Adrien Mazarguil
6WIND
next prev parent reply other threads:[~2015-06-12 15:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-22 14:17 [PATCH] mlx4: fix compilation warnings for 32 bit Nelio Laranjeiro
2015-06-12 15:15 ` Adrien Mazarguil [this message]
2015-06-12 15:42 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150612151546.GJ12195@6wind.com \
--to=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=nelio.laranjeiro@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.