From: "John W. Linville" <linville@tuxdriver.com>
To: netdev@vger.kernel.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: Re: [PATCH 1/2] iplink_geneve: add ttl configuration at link creation
Date: Mon, 15 Jun 2015 14:38:46 -0400 [thread overview]
Message-ID: <20150615183845.GF16684@tuxdriver.com> (raw)
In-Reply-To: <1434393436-4487-2-git-send-email-linville@tuxdriver.com>
On Mon, Jun 15, 2015 at 02:37:15PM -0400, John W. Linville wrote:
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
> ---
> include/linux/if_link.h | 1 +
This includes the include/linux/if_link.h bits, that will need to be
dropped after iproute2 does the 4.1 update for that file.
> ip/iplink_geneve.c | 23 ++++++++++++++++++++++-
> man/man8/ip-link.8.in | 7 +++++++
> 3 files changed, 30 insertions(+), 1 deletion(-)
>
> diff --git a/include/linux/if_link.h b/include/linux/if_link.h
> index 7720ad34c6b3..2b5268531bef 100644
> --- a/include/linux/if_link.h
> +++ b/include/linux/if_link.h
> @@ -393,6 +393,7 @@ enum {
> IFLA_GENEVE_UNSPEC,
> IFLA_GENEVE_ID,
> IFLA_GENEVE_REMOTE,
> + IFLA_GENEVE_TTL,
> __IFLA_GENEVE_MAX
> };
> #define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1)
> diff --git a/ip/iplink_geneve.c b/ip/iplink_geneve.c
> index 74703e1ee156..dff08a62d9a9 100644
> --- a/ip/iplink_geneve.c
> +++ b/ip/iplink_geneve.c
> @@ -17,9 +17,11 @@
> static void print_explain(FILE *f)
> {
> fprintf(f, "Usage: ... geneve id VNI remote ADDR\n");
> + fprintf(f, " [ ttl TTL ]\n");
> fprintf(f, "\n");
> fprintf(f, "Where: VNI := 0-16777215\n");
> fprintf(f, " ADDR := IP_ADDRESS\n");
> + fprintf(f, " TTL := { 1..255 | inherit }\n");
> }
>
> static void explain(void)
> @@ -34,7 +36,7 @@ static int geneve_parse_opt(struct link_util *lu, int argc, char **argv,
> int vni_set = 0;
> __u32 daddr = 0;
> struct in6_addr daddr6 = IN6ADDR_ANY_INIT;
> -
> + __u8 ttl = 0;
>
> while (argc > 0) {
> if (!matches(*argv, "id") ||
> @@ -52,6 +54,18 @@ static int geneve_parse_opt(struct link_util *lu, int argc, char **argv,
> }
> if (IN_MULTICAST(ntohl(daddr)))
> invarg("invalid remote address", *argv);
> + } else if (!matches(*argv, "ttl") ||
> + !matches(*argv, "hoplimit")) {
> + unsigned uval;
> +
> + NEXT_ARG();
> + if (strcmp(*argv, "inherit") != 0) {
> + if (get_unsigned(&uval, *argv, 0))
> + invarg("invalid TTL", *argv);
> + if (uval > 255)
> + invarg("TTL must be <= 255", *argv);
> + ttl = uval;
> + }
> } else if (matches(*argv, "help") == 0) {
> explain();
> return -1;
> @@ -80,6 +94,7 @@ static int geneve_parse_opt(struct link_util *lu, int argc, char **argv,
> addattr32(n, 1024, IFLA_GENEVE_ID, vni);
> if (daddr)
> addattr_l(n, 1024, IFLA_GENEVE_REMOTE, &daddr, 4);
> + addattr8(n, 1024, IFLA_GENEVE_TTL, ttl);
>
> return 0;
> }
> @@ -105,6 +120,12 @@ static void geneve_print_opt(struct link_util *lu, FILE *f, struct rtattr *tb[])
> fprintf(f, "remote %s ",
> format_host(AF_INET, 4, &addr, s1, sizeof(s1)));
> }
> +
> + if (tb[IFLA_GENEVE_TTL]) {
> + __u8 ttl = rta_getattr_u8(tb[IFLA_GENEVE_TTL]);
> + if (ttl)
> + fprintf(f, "ttl %d ", ttl);
> + }
> }
>
> static void geneve_print_help(struct link_util *lu, int argc, char **argv,
> diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in
> index 8cac246d7296..51d0c624a023 100644
> --- a/man/man8/ip-link.8.in
> +++ b/man/man8/ip-link.8.in
> @@ -606,6 +606,9 @@ the following additional arguments are supported:
>
> .BI "ip link add " DEVICE
> .BI type " geneve " id " ID " remote " IPADDR"
> +.R " [ "
> +.BI ttl " TTL "
> +.R " ]"
>
> .in +8
> .sp
> @@ -616,6 +619,10 @@ the following additional arguments are supported:
> .BI remote " IPADDR"
> - specifies the unicast destination IP address to use in outgoing packets.
>
> +.sp
> +.BI ttl " TTL"
> +- specifies the TTL value to use in outgoing packets.
> +
> .in -8
>
> .SS ip link delete - delete virtual link
> --
> 2.1.0
>
>
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next prev parent reply other threads:[~2015-06-15 18:45 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-13 16:57 [PATCH v3] add GENEVE netdev tunnel driver John W. Linville
2015-05-13 16:57 ` [PATCH v3 1/5] geneve: remove MODULE_ALIAS_RTNL_LINK from net/ipv4/geneve.c John W. Linville
2015-05-13 16:57 ` [PATCH v3 2/5] geneve: move definition of geneve_hdr() to geneve.h John W. Linville
2015-05-13 16:57 ` [PATCH v3 3/5] geneve: Rename support library as geneve_core John W. Linville
2015-05-13 16:57 ` [PATCH v3 4/5] geneve_core: identify as driver library in modules description John W. Linville
2015-05-13 16:57 ` [PATCH v3 5/5] geneve: add initial netdev driver for GENEVE tunnels John W. Linville
2015-05-13 17:02 ` [PATCH v3] iproute2: GENEVE support John W. Linville
2015-05-21 22:19 ` Stephen Hemminger
2015-05-22 18:45 ` John W. Linville
2015-05-22 18:46 ` [PATCH] iproute2: update ip-link.8 for geneve tunnels John W. Linville
2015-06-15 18:37 ` [PATCH 0/2] iplink_geneve: add ttl and tos configuration bits John W. Linville
2015-06-15 18:37 ` [PATCH 1/2] iplink_geneve: add ttl configuration at link creation John W. Linville
2015-06-15 18:38 ` John W. Linville [this message]
2015-06-15 18:37 ` [PATCH 2/2] iplink_geneve: add tos " John W. Linville
2015-06-15 18:39 ` John W. Linville
2015-05-13 19:59 ` [PATCH v3] add GENEVE netdev tunnel driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150615183845.GF16684@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.