All of lore.kernel.org
 help / color / mirror / Atom feed
diff for duplicates of <20150623195424.GE40168@dtor-ws>

diff --git a/a/1.txt b/N1/1.txt
index 0096a54..e471745 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -1,12 +1,12 @@
 On Tue, Jun 23, 2015 at 09:46:20PM +0200, Hans de Goede wrote:
 > Hi,
 > 
-> On 06/23/2015 05:06 PM, m.silentcreek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
+> On 06/23/2015 05:06 PM, m.silentcreek at gmail.com wrote:
 > >Hi Hans,
 > >
 > >is it possible that this patch (and the parent commit "Input: sun4i-ts - allow controlling filter and sensitivity via DT") has quite an adversial effect on other boards than the ones tested?
 > >
-> >On my Lemaker Bananapi the temperature is now being reported as somwhere between -15°C to -10°C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40°C. While that might not have been accurate either, it was at least plausible.
+> >On my Lemaker Bananapi the temperature is now being reported as somwhere between -15?C to -10?C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40?C. While that might not have been accurate either, it was at least plausible.
 > 
 > The temperature curve for the A20 SoC was not changed, if it did change then
 > you're using an old dtb file with a new kernel, you must always update your
@@ -25,7 +25,7 @@ Umm, we should keep compatibility with old DTS...
 > >Timo
 > >
 > >
-> >Am Montag, 9. März 2015 10:38:02 UTC+1 schrieb Hans de Goede:
+> >Am Montag, 9. M?rz 2015 10:38:02 UTC+1 schrieb Hans de Goede:
 > >>The commit titled:
 > >>"touchscreen: sun4i-ts: A10 (sun4i) has a different temperature curve"
 > >>contains a math error, the offset it uses is in degrees, but the actual code
@@ -39,7 +39,7 @@ Umm, we should keep compatibility with old DTS...
 > >>This has been tested on an A10, A13, A20 and A31 to make sure everything really
 > >>is correct now.
 > >>
-> >>Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
+> >>Signed-off-by: Hans de Goede <hdegoede@redhat.com>
 > >>---
 > >>Note if possible this commit should be squashed into the original
 > >>"touchscreen: sun4i-ts: A10 (sun4i) has a different temperature curve"
@@ -109,7 +109,3 @@ Umm, we should keep compatibility with old DTS...
 
 -- 
 Dmitry
---
-To unsubscribe from this list: send the line "unsubscribe devicetree" in
-the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
-More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff --git a/a/content_digest b/N1/content_digest
index 050cc2b..3249cd3 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -1,29 +1,21 @@
  "ref\01425893870-28715-1-git-send-email-hdegoede@redhat.com\0"
  "ref\041a7a857-96fd-48ab-9778-127cfc091ef0@googlegroups.com\0"
  "ref\05589B78C.4080600@redhat.com\0"
- "ref\05589B78C.4080600-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org\0"
- "From\0Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0"
- "Subject\0Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting\0"
+ "From\0dmitry.torokhov@gmail.com (Dmitry Torokhov)\0"
+ "Subject\0[PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting\0"
  "Date\0Tue, 23 Jun 2015 12:54:24 -0700\0"
- "To\0Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\0"
- "Cc\0m.silentcreek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org"
-  linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
-  linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
-  devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
-  linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
-  wens-jdAy2FN1RRM@public.gmane.org
- " maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org\0"
+ "To\0linux-arm-kernel@lists.infradead.org\0"
  "\00:1\0"
  "b\0"
  "On Tue, Jun 23, 2015 at 09:46:20PM +0200, Hans de Goede wrote:\n"
  "> Hi,\n"
  "> \n"
- "> On 06/23/2015 05:06 PM, m.silentcreek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:\n"
+ "> On 06/23/2015 05:06 PM, m.silentcreek at gmail.com wrote:\n"
  "> >Hi Hans,\n"
  "> >\n"
  "> >is it possible that this patch (and the parent commit \"Input: sun4i-ts - allow controlling filter and sensitivity via DT\") has quite an adversial effect on other boards than the ones tested?\n"
  "> >\n"
- "> >On my Lemaker Bananapi the temperature is now being reported as somwhere between -15\302\260C to -10\302\260C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40\302\260C. While that might not have been accurate either, it was at least plausible.\n"
+ "> >On my Lemaker Bananapi the temperature is now being reported as somwhere between -15?C to -10?C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40?C. While that might not have been accurate either, it was at least plausible.\n"
  "> \n"
  "> The temperature curve for the A20 SoC was not changed, if it did change then\n"
  "> you're using an old dtb file with a new kernel, you must always update your\n"
@@ -42,7 +34,7 @@
  "> >Timo\n"
  "> >\n"
  "> >\n"
- "> >Am Montag, 9. M\303\244rz 2015 10:38:02 UTC+1 schrieb Hans de Goede:\n"
+ "> >Am Montag, 9. M?rz 2015 10:38:02 UTC+1 schrieb Hans de Goede:\n"
  "> >>The commit titled:\n"
  "> >>\"touchscreen: sun4i-ts: A10 (sun4i) has a different temperature curve\"\n"
  "> >>contains a math error, the offset it uses is in degrees, but the actual code\n"
@@ -56,7 +48,7 @@
  "> >>This has been tested on an A10, A13, A20 and A31 to make sure everything really\n"
  "> >>is correct now.\n"
  "> >>\n"
- "> >>Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\n"
+ "> >>Signed-off-by: Hans de Goede <hdegoede@redhat.com>\n"
  "> >>---\n"
  "> >>Note if possible this commit should be squashed into the original\n"
  "> >>\"touchscreen: sun4i-ts: A10 (sun4i) has a different temperature curve\"\n"
@@ -125,10 +117,6 @@
  "> Hans\n"
  "\n"
  "-- \n"
- "Dmitry\n"
- "--\n"
- "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n"
- "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n"
- More majordomo info at  http://vger.kernel.org/majordomo-info.html
+ Dmitry
 
-af34fe1fefbf5c93bd2019ac1527779a2921d2b6d8735d4137dd231797668e5a
+4a4044bf9b4de3062f197e49c146bdd0a60333201be6972c618089869cc988e8

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.