From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [GIT PULL] USB driver patches for 4.2-rc1
Date: Fri, 26 Jun 2015 12:25:23 -0700 [thread overview]
Message-ID: <20150626192523.GA25710@kroah.com> (raw)
The following changes since commit d4a4f75cd8f29cd9464a5a32e9224a91571d6649:
Linux 4.1-rc7 (2015-06-07 20:23:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-4.2-rc1
for you to fetch changes up to 50641056d833813b71b0ad51823f7ded8dd62e7f:
usb: dwc3: Use ASCII space in Kconfig (2015-06-12 17:42:31 -0700)
----------------------------------------------------------------
USB patches for 4.2-rc1
Here's the big USB patchset for 4.2-rc1. As is normal these days, the
majority of changes are in the gadget drivers, with a bunch of other
small driver changes.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Abhishek Bist (1):
USB: hcd.h : Removed an unnecessary function prototype usb_find_interface_driver()
Akinobu Mita (1):
usb: storage: fix module reference for scsi host
Alan Stern (1):
USB: don't build PCI quirks if USB support isn't configured
Alexey Sokolov (1):
cdc-acm: Add support of ATOL FPrint fiscal printers
Andrzej Pietrasiewicz (6):
usb: gadget: rndis: use rndis_params instead of configNr
usb: gadget: rndis: style correction
usb: gadget: rndis: remove the limit of available rndis connections
usb: gadget: rndis: change the value passed to rndis_signal_(dis)connect()
usb: gadget: rndis: don't duplicate the "i" variable
usb: gadget: rndis: use signed type for a signed value
Arnd Bergmann (2):
usb: renesas_usbhs: avoid uninitialized variable use
usb: phy: add static inline wrapper for devm_usb_get_phy_by_node
Arun Ramamurthy (3):
phy: core: Add devm_of_phy_get_by_index to phy-core
usb: ehci-platform: Use devm_of_phy_get_by_index
usb: ohci-platform: Use devm_of_phy_get_by_index
Axel Lin (1):
phy: core: Check requested PHY status in _of_phy_get()
Bin Liu (2):
usb: musb: only set test mode once
usb: musb: add softconnect for host mode
Brian Norris (2):
Documentation: devicetree: add Broadcom SATA PHY binding
phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
Chris Bainbridge (1):
usb: host: xhci: remove incorrect comment about mutex
Colin Ian King (1):
usb: isp1760: check for null return from kzalloc
Dan Carpenter (1):
USB: devio: fix a condition in async_completed()
Dmitry Torokhov (1):
phy: phy-core: allow specifying supply at port level
Fabian Frederick (1):
cdc-acm: use swap() in acm_probe()
Fabio Estevam (1):
usb: chipidea: usbmisc_imx: Remove unneeded semicolon
Felipe Balbi (8):
phy: miphy28lp: fix sparse warnings
phy: miphy365x: fix sparse warnings
usb: dwc2: hcd: fix build warning
usb: gadget: atmel: fix build warning
usb: musb: am35x: fix build warnings
usb: musb: ux500: fix build warnings
usb: gadget: atmel: fix build warnings
usb: dwc3: gadget: don't clear EP_BUSY too early
Geert Uytterhoeven (3):
usb: phy: Remove the phy-rcar-gen2-usb driver
usb: phy: Allow compile test of GPIO consumers if !GPIOLIB
usb: phy: Remove the phy-rcar-gen2-usb driver
Greg Kroah-Hartman (25):
USB: ehci-dbg.c: move assignment out of if () block
USB: fusbh200-hcd.c: move assignment out of if () block
USB: hcd.c: move assignment out of if () block
USB: hub.c: move assignment out of if () block
USB: inode.c: move assignment out of if () block
USB: isp116x-hcd.c: move assignment out of if () block
USB: mon_bin.c: move assignment out of if () block
USB: mon_main.c: move assignment out of if () block
USB: mon_stat.c: move assignment out of if () block
USB: ohci-dbg.c: move assignment out of if () block
USB: ohci-hcd.c: move assignment out of if () block
USB: ohci-q.c: move assignment out of if () block
USB: sisusb.c: move assignment out of if () block
USB: sisusb_con.c: move assignment out of if () block
USB: speedtch.c: move assignment out of if () block
USB: usbatm.c: move assignment out of if () block
USB: usblp.c: move assignment out of if () block
USB: uss720.c: move assignment out of if () block
USB: xusbatm.c: move assignment out of if () block
Merge 4.1-rc4 into usb-next
Merge tag 'usb-for-v4.2' of git://git.kernel.org/.../balbi/usb into usb-next
Merge tag 'phy-for-v4.2' of git://git.kernel.org/.../kishon/linux-phy into usb-next
Merge tag 'usb-serial-4.2-rc1' of git://git.kernel.org/.../johan/usb-serial into usb-next
Merge 4.1-rc7 into usb-next
Merge tag 'usb-ci-v4.2-rc1' of git://git.kernel.org/.../peter.chen/usb into usb-work
Gregory Herrero (15):
usb: dwc2: add controller hibernation support
usb: dwc2: implement hibernation during bus suspend/resume
usb: dwc2: controller must update lx_state before releasing lock
usb: dwc2: add external_id_pin_ctl core parameter
usb: dwc2: gadget: use reset detect interrupt
usb: dwc2: gadget: ignore pm suspend/resume in L2
usb: dwc2: gadget: prevent new request submission during suspend
usb: dwc2: gadget: powerup controller if needed
usb: dwc2: gadget: enable otg flag in dual role configuration
usb: dwc2: host: add bus_suspend/bus_resume callback
usb: dwc2: host: resume root hub on port connect
usb: dwc2: host: spinlock urb_enqueue
usb: dwc2: host: don't use dma_alloc_coherent with irqs disabled
usb: dwc2: add hibernation core parameter
usb: dwc2: host: ensure qtb exists before dereferencing it
Hans de Goede (6):
usb: musb: Add pre and post root port reset end callbacks
usb: musb: Make musb_write_rxfun* and musb_write_rxhub* work like their tx versions
usb: musb: Make busctl_offset an io-op rather then a define
usb: musb: Do not use musb_read[b|w] / _write[b|w] wrappers in generic fifo functions
usb: musb: Fix platform code being unable to override ep access ops
phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect
Hauke Mehrtens (2):
USB: ssb: fix error handling in ssb_hcd_create_pdev()
USB: ssb: use devm_kzalloc
Heikki Krogerus (12):
usb: add bus type for USB ULPI
usb: dwc3: USB2 PHY register access bits
usb: dwc3: ULPI or UTMI+ select
usb: dwc3: store driver data earlier
usb: dwc3: cache hwparams earlier
usb: dwc3: soft reset to it's own function
usb: dwc3: setup phys earlier
usb: dwc3: add hsphy_interface property
usb: dwc3: pci: add quirk for Baytrails
usb: dwc3: add ULPI interface support
phy: helpers for USB ULPI PHY registering
phy: add driver for TI TUSB1210 ULPI PHY
Ivan T. Ivanov (2):
usb: phy: msm: Use extcon framework for VBUS and ID detection
usb: phy: msm: Manual PHY and LINK controller VBUS change notification
Jingwu Lin (1):
usb: dwc2: host: implement test mode
Joachim Eastwood (1):
USB: ehci-platform: support EHCIs with transaction translator
Joe Perches (2):
usb: gadget: s3c2410_udc: Remove static char buffer, use vsprintf extension %pV
usb: storage: scsiglue: Remove SPRINTF macro use
Johan Hovold (5):
usb: musb: fix inefficient copy of unaligned buffers
USB: musb: fix inefficient copy of unaligned buffers
USB: ehci-tegra: fix inefficient copy of unaligned buffers
USB: cdc-acm: use idr to manage minor numbers
USB: cdc-acm: add support for up to 256 devices
Kazuya Mizuguchi (1):
usb: renesas_usbhs: Fix fifo unclear in usbhsf_prepare_pop
Krzysztof Kozlowski (2):
usb: phy-ab8500-usb: Constify platform_device_id
usb: phy-ab8500-usb: Constify platform_device_id
Kuninori Morimoto (1):
usb: renesas_usbhs: tidyup usbhs_for_each_dfifo macro
Mathias Nyman (2):
xhci: optimize xhci bus resume time
xhci: Return correct number of tranferred bytes for stalled control endpoints
Matthew Garrett (2):
usb: Prefer firmware values when determining whether a port is removable
usb: Set unused ports to "fixed" rather than "unknown"
Mian Yousaf Kaukab (16):
usb: dwc2: move debugfs code to a separate file
usb: dwc2: debugfs: add support for complete register dump
usb: dwc2: set parameter values in probe function
usb: dwc2: gadget: remove s3c_hsotg_ep_disable_force
usb: dwc2: host: register handle to the phy
usb: dwc2: remove dwc2_platform.ko
usb: gadget: net2280: fix ep_cfg for defect7374
usb: gadget: net2280: reset sequence number on ep enable
usb: gadget: net2280: unconditionally reset dma in usb_reset
usb: gadget: net2280: don't set ep_cfg.direction bit
usb: gadget: net2280: set all byte enables on start
usb: gadget: net2280: check interrupts for all endpoints
usb: gadget: net2280: fix use of GPEP in both directions
usb: gadget: autoconf: net2280: match hardware and usb ep address
usb: gadget: net2280: physically disable endpoint on disable operation
usb: gadget: net2280: fix pullup handling
NeilBrown (6):
usb: phy: Add interface to get phy give of device_node.
power: twl4030_charger: find associated phy by more reliable means.
phy: twl4030-usb: make runtime pm more reliable.
phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback.
phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function.
phy: twl4030-usb: add ABI documentation
Nikhil Badola (2):
drivers:usb:fsl: Check IP version 2.4 for mph USB controller
drivers:usb:fsl: Add support for USB controller version-2.5
Nizam Haider (1):
Usb: core: buffer: fixed the checkpatch warning
Nobuhiro Iwamatsu (1):
usb: renesas_usbhs: Add access control for INTSTS1 and INTENB1 register
Peter Chen (1):
usb: Documentation: gadget-testing: fix parameter for capture channel mask
Peter Griffin (1):
usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example.
Ramneek Mehresh (2):
drivers:usb:fsl:Make fsl ehci drv an independent driver module
drivers:usb:fsl: Fix compilation error for fsl ehci drv
Rob Herring (6):
dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
phy: Add Marvell USB 2.0 OTG 28nm PHY
phy: add Marvell HSIC 28nm PHY
dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
usb: chipidea: allow multiple instances to use default ci_default_pdata
usb: chipidea: add work-around for Marvell HSIC PHY startup
Robert Schlabbach (1):
usb: core: Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset
Roger Quadros (5):
usb: xhci: cleanup xhci_hcd allocation
usb: xhci: plat: Create both HCDs before adding them
usb: xhci: Allow usb_add/remove_hcd() to be called repeatedly
usb: xhci: fix xhci locking up during hcd remove
usb: xhci: Fix suspend/resume when used with OTG core
Rui Miguel Silva (1):
usb: gadget: f_fs: add extra check before unregister_gadget_item
Rupesh Tatiya (1):
usb: Enable LPM for USB 2.01+ full-speed devices
Subbaraya Sundeep Bhatta (2):
usb: dwc3: gadget: return error if command sent to DGCMD register fails
usb: dwc3: gadget: return error if command sent to DEPCMD register fails
Teunis van Beelen (1):
USB: usbtmc: add device quirk for Rigol DS6104
Thierry Reding (1):
usb: dwc3: Use ASCII space in Kconfig
Tony Lindgren (10):
usb: musb: Fix up DMA related macros
usb: musb: Set up function pointers for DMA
usb: musb: Get rid of the DMA ifdefs for musb_core.c
usb: musb: Remove DMA ifdef for musb_gadget.c short_packet
usb: musb: Remove ifdefs for TX DMA for musb_host.c
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part1
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part2
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part3
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part4
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part5
Vaishali Thakkar (1):
USB: serial: mos7840: Use setup_timer
Wei Yongjun (1):
usb: gadget: uvc: remove unused including <linux/version.h>
Yoshihiro Shimoda (5):
usb: renesas_usbhs: Revise the binding document about the dma-names
phy: rcar-gen2: Add support for R-Car E2
usb: renesas_usbhs: Change USBHS_TYPE_R8A779x to USBHS_TYPE_RCAR_GEN2
usb: renesas_usbhs: Add support for R-Car E2
usb: renesas_usbhs: Don't disable the pipe if Control write status stage
.../ABI/testing/sysfs-platform-twl4030-usb | 8 +
.../bindings/phy/brcm,brcmstb-sata-phy.txt | 40 ++
.../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 +
.../devicetree/bindings/phy/rcar-gen2-phy.txt | 1 +
.../devicetree/bindings/power/twl-charger.txt | 10 +
.../devicetree/bindings/usb/ci-hdrc-imx.txt | 35 -
.../devicetree/bindings/usb/ci-hdrc-qcom.txt | 17 -
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 22 +-
.../devicetree/bindings/usb/ci-hdrc-zevio.txt | 17 -
Documentation/devicetree/bindings/usb/dwc3-st.txt | 7 +-
Documentation/devicetree/bindings/usb/dwc3.txt | 2 +
.../devicetree/bindings/usb/msm-hsusb.txt | 11 +
.../devicetree/bindings/usb/renesas_usbhs.txt | 1 +
.../devicetree/bindings/usb/twlxxxx-usb.txt | 3 +
Documentation/devicetree/bindings/usb/usb-ehci.txt | 2 +
Documentation/phy.txt | 7 +-
Documentation/usb/gadget-testing.txt | 4 +-
MAINTAINERS | 7 +
drivers/phy/Kconfig | 36 +
drivers/phy/Makefile | 4 +
drivers/phy/phy-brcmstb-sata.c | 216 ++++++
drivers/phy/phy-core.c | 67 +-
drivers/phy/phy-miphy28lp.c | 9 +-
drivers/phy/phy-miphy365x.c | 9 +-
drivers/phy/phy-pxa-28nm-hsic.c | 220 ++++++
drivers/phy/phy-pxa-28nm-usb2.c | 355 ++++++++++
drivers/phy/phy-rcar-gen2.c | 6 +-
drivers/phy/phy-sun4i-usb.c | 9 +
drivers/phy/phy-tusb1210.c | 153 ++++
drivers/phy/phy-twl4030-usb.c | 34 +-
drivers/phy/ulpi_phy.h | 31 +
drivers/power/twl4030_charger.c | 21 +-
drivers/usb/atm/speedtch.c | 18 +-
drivers/usb/atm/usbatm.c | 6 +-
drivers/usb/atm/xusbatm.c | 6 +-
drivers/usb/chipidea/ci_hdrc_usb2.c | 8 +-
drivers/usb/chipidea/host.c | 12 +
drivers/usb/chipidea/usbmisc_imx.c | 2 +-
drivers/usb/class/cdc-acm.c | 57 +-
drivers/usb/class/cdc-acm.h | 3 +-
drivers/usb/class/usblp.c | 15 +-
drivers/usb/class/usbtmc.c | 1 +
drivers/usb/common/Makefile | 1 +
drivers/usb/common/ulpi.c | 255 +++++++
drivers/usb/core/Kconfig | 20 +
drivers/usb/core/buffer.c | 3 +-
drivers/usb/core/devio.c | 2 +-
drivers/usb/core/hcd.c | 3 +-
drivers/usb/core/hub.c | 122 ++--
drivers/usb/dwc2/Kconfig | 8 -
drivers/usb/dwc2/Makefile | 9 +-
drivers/usb/dwc2/core.c | 439 +++++++++++-
drivers/usb/dwc2/core.h | 120 +++-
drivers/usb/dwc2/core_intr.c | 45 +-
drivers/usb/dwc2/debug.h | 27 +
drivers/usb/dwc2/debugfs.c | 771 +++++++++++++++++++++
drivers/usb/dwc2/gadget.c | 459 ++----------
drivers/usb/dwc2/hcd.c | 100 +--
drivers/usb/dwc2/hcd.h | 7 +-
drivers/usb/dwc2/hcd_intr.c | 66 +-
drivers/usb/dwc2/hcd_queue.c | 18 +-
drivers/usb/dwc2/platform.c | 25 +-
drivers/usb/dwc3/Kconfig | 7 +
drivers/usb/dwc3/Makefile | 4 +
drivers/usb/dwc3/core.c | 108 ++-
drivers/usb/dwc3/core.h | 26 +
drivers/usb/dwc3/dwc3-pci.c | 36 +
drivers/usb/dwc3/gadget.c | 10 +-
drivers/usb/dwc3/platform_data.h | 2 +
drivers/usb/dwc3/ulpi.c | 91 +++
drivers/usb/gadget/epautoconf.c | 24 +-
drivers/usb/gadget/function/f_fs.c | 10 +-
drivers/usb/gadget/function/f_rndis.c | 60 +-
drivers/usb/gadget/function/rndis.c | 352 +++++-----
drivers/usb/gadget/function/rndis.h | 33 +-
drivers/usb/gadget/function/u_rndis.h | 2 -
drivers/usb/gadget/function/uvc.h | 1 -
drivers/usb/gadget/legacy/inode.c | 9 +-
drivers/usb/gadget/udc/atmel_usba_udc.c | 6 +-
drivers/usb/gadget/udc/net2280.c | 140 +++-
drivers/usb/gadget/udc/s3c2410_udc.c | 28 +-
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/Makefile | 5 +-
drivers/usb/host/ehci-dbg.c | 3 +-
drivers/usb/host/ehci-fsl.c | 168 ++---
drivers/usb/host/ehci-hcd.c | 8 +-
drivers/usb/host/ehci-hub.c | 3 +-
drivers/usb/host/ehci-platform.c | 73 +-
drivers/usb/host/ehci-tegra.c | 12 +-
drivers/usb/host/ehci.h | 3 +
drivers/usb/host/fsl-mph-dr-of.c | 8 +
drivers/usb/host/fusbh200-hcd.c | 3 +-
drivers/usb/host/isp116x-hcd.c | 3 +-
drivers/usb/host/ohci-dbg.c | 6 +-
drivers/usb/host/ohci-hcd.c | 3 +-
drivers/usb/host/ohci-platform.c | 69 +-
drivers/usb/host/ohci-q.c | 3 +-
drivers/usb/host/ssb-hcd.c | 15 +-
drivers/usb/host/xhci-hub.c | 65 +-
drivers/usb/host/xhci-pci.c | 17 +-
drivers/usb/host/xhci-plat.c | 43 +-
drivers/usb/host/xhci-ring.c | 7 +-
drivers/usb/host/xhci.c | 44 +-
drivers/usb/host/xhci.h | 19 +-
drivers/usb/isp1760/isp1760-udc.c | 2 +
drivers/usb/misc/sisusbvga/sisusb.c | 39 +-
drivers/usb/misc/sisusbvga/sisusb_con.c | 54 +-
drivers/usb/misc/uss720.c | 6 +-
drivers/usb/mon/mon_bin.c | 7 +-
drivers/usb/mon/mon_main.c | 12 +-
drivers/usb/mon/mon_stat.c | 3 +-
drivers/usb/musb/am35x.c | 8 +-
drivers/usb/musb/blackfin.c | 5 +
drivers/usb/musb/cppi_dma.c | 9 +-
drivers/usb/musb/da8xx.c | 6 +-
drivers/usb/musb/davinci.c | 7 +-
drivers/usb/musb/jz4740.c | 6 +-
drivers/usb/musb/musb_core.c | 81 ++-
drivers/usb/musb/musb_core.h | 28 +-
drivers/usb/musb/musb_cppi41.c | 8 +-
drivers/usb/musb/musb_debugfs.c | 100 ++-
drivers/usb/musb/musb_dma.h | 67 +-
drivers/usb/musb/musb_dsps.c | 6 +-
drivers/usb/musb/musb_gadget.c | 24 +-
drivers/usb/musb/musb_host.c | 536 ++++++++------
drivers/usb/musb/musb_io.h | 2 +
drivers/usb/musb/musb_regs.h | 80 ++-
drivers/usb/musb/musb_virthub.c | 2 +
drivers/usb/musb/musbhsdma.c | 9 +-
drivers/usb/musb/omap2430.c | 5 +
drivers/usb/musb/tusb6010.c | 8 +-
drivers/usb/musb/tusb6010.h | 6 -
drivers/usb/musb/tusb6010_omap.c | 9 +-
drivers/usb/musb/ux500.c | 8 +-
drivers/usb/musb/ux500_dma.c | 8 +-
drivers/usb/phy/Kconfig | 16 +-
drivers/usb/phy/Makefile | 1 -
drivers/usb/phy/phy-ab8500-usb.c | 2 +-
drivers/usb/phy/phy-msm-usb.c | 110 +++
drivers/usb/phy/phy-rcar-gen2-usb.c | 246 -------
drivers/usb/phy/phy.c | 97 ++-
drivers/usb/renesas_usbhs/common.c | 19 +-
drivers/usb/renesas_usbhs/fifo.h | 9 +-
drivers/usb/renesas_usbhs/mod.c | 63 +-
drivers/usb/serial/mos7840.c | 11 +-
drivers/usb/storage/alauda.c | 12 +-
drivers/usb/storage/cypress_atacb.c | 10 +-
drivers/usb/storage/datafab.c | 12 +-
drivers/usb/storage/ene_ub6250.c | 11 +-
drivers/usb/storage/freecom.c | 12 +-
drivers/usb/storage/isd200.c | 11 +-
drivers/usb/storage/jumpshot.c | 11 +-
drivers/usb/storage/karma.c | 12 +-
drivers/usb/storage/onetouch.c | 12 +-
drivers/usb/storage/realtek_cr.c | 12 +-
drivers/usb/storage/scsiglue.c | 30 +-
drivers/usb/storage/scsiglue.h | 3 +-
drivers/usb/storage/sddr09.c | 12 +-
drivers/usb/storage/sddr55.c | 11 +-
drivers/usb/storage/shuttle_usbat.c | 12 +-
drivers/usb/storage/usb.c | 16 +-
drivers/usb/storage/usb.h | 16 +-
include/linux/fsl_devices.h | 1 +
include/linux/mod_devicetable.h | 6 +
include/linux/phy/phy-sun4i-usb.h | 26 +
include/linux/phy/phy.h | 9 +
include/linux/platform_data/usb-rcar-gen2-phy.h | 22 -
include/linux/ulpi/driver.h | 60 ++
include/linux/ulpi/interface.h | 23 +
include/linux/ulpi/regs.h | 130 ++++
include/linux/usb/hcd.h | 2 -
include/linux/usb/msm_hsusb.h | 22 +
include/linux/usb/msm_hsusb_hw.h | 9 +
include/linux/usb/net2280.h | 3 +
include/linux/usb/phy.h | 8 +
include/linux/usb/renesas_usbhs.h | 3 +-
include/linux/usb/ulpi.h | 134 +---
include/linux/usb/usb338x.h | 4 +
scripts/mod/devicetable-offsets.c | 4 +
scripts/mod/file2alias.c | 13 +
180 files changed, 5630 insertions(+), 2330 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-platform-twl4030-usb
create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
create mode 100644 drivers/phy/phy-brcmstb-sata.c
create mode 100644 drivers/phy/phy-pxa-28nm-hsic.c
create mode 100644 drivers/phy/phy-pxa-28nm-usb2.c
create mode 100644 drivers/phy/phy-tusb1210.c
create mode 100644 drivers/phy/ulpi_phy.h
create mode 100644 drivers/usb/common/ulpi.c
create mode 100644 drivers/usb/dwc2/debug.h
create mode 100644 drivers/usb/dwc2/debugfs.c
create mode 100644 drivers/usb/dwc3/ulpi.c
delete mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c
create mode 100644 include/linux/phy/phy-sun4i-usb.h
delete mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h
create mode 100644 include/linux/ulpi/driver.h
create mode 100644 include/linux/ulpi/interface.h
create mode 100644 include/linux/ulpi/regs.h
reply other threads:[~2015-06-26 19:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150626192523.GA25710@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.